#include <mach/gpio.h>
#include <mach/mux.h>
+#include <mach/dma.h>
#include <mach/irda.h>
#include <mach/usb.h>
#include <mach/tc.h>
#include <mach/board.h>
#include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
#include <mach/keypad.h>
/* Write to I2C device */
.resource = sx1_irda_resources,
};
-/*----------- McBSP & Sound -------------------------*/
-
-/* Playback interface - McBSP1 */
-static struct omap_mcbsp_reg_cfg mcbsp1_regs = {
- .spcr2 = XINTM(3), /* SPCR2=30 */
- .spcr1 = RINTM(3), /* SPCR1=30 */
- .rcr2 = 0, /* RCR2 =00 */
- .rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1=140 */
- .xcr2 = 0, /* XCR2 = 0 */
- .xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */
- .srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */
- .srgr2 = FSGM | FPER(31), /* SRGR2=101f */
- .pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
- /* PCR0 =0f0f */
-};
-
-static struct omap_alsa_codec_config sx1_alsa_config = {
- .name = "SX1 EGold",
- .mcbsp_regs_alsa = &mcbsp1_regs,
-};
-
-static struct platform_device sx1_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &sx1_alsa_config,
- },
-};
-
/*----------- MTD -------------------------*/
static struct mtd_partition sx1_partitions[] = {
.pins[2] = 0,
};
-/*----------- MMC -------------------------*/
-
-static struct omap_mmc_config sx1_mmc_config __initdata = {
- .mmc [0] = {
- .enabled = 1,
- .wire4 = 0,
- },
-};
-
/*----------- LCD -------------------------*/
static struct platform_device sx1_lcd_device = {
&sx1_flash_device,
&sx1_kp_device,
&sx1_lcd_device,
- &sx1_mcbsp1_device,
&sx1_irda_device,
};
/*-----------------------------------------*/
static struct omap_board_config_kernel sx1_config[] __initdata = {
{ OMAP_TAG_USB, &sx1_usb_config },
- { OMAP_TAG_MMC, &sx1_mmc_config },
{ OMAP_TAG_LCD, &sx1_lcd_config },
{ OMAP_TAG_UART, &sx1_uart_config },
};
/* turn on USB power */
/* sx1_setusbpower(1); cant do it here because i2c is not ready */
- omap_request_gpio(1); /* A_IRDA_OFF */
- omap_request_gpio(11); /* A_SWITCH */
- omap_request_gpio(15); /* A_USB_ON */
- omap_set_gpio_direction(1, 0);/* gpio1 -> output */
- omap_set_gpio_direction(11, 0);/* gpio11 -> output */
- omap_set_gpio_direction(15, 0);/* gpio15 -> output */
- /* set GPIO data */
- omap_set_gpio_dataout(1, 1);/*A_IRDA_OFF = 1 */
- omap_set_gpio_dataout(11, 0);/*A_SWITCH = 0 */
- omap_set_gpio_dataout(15, 0);/*A_USB_ON = 0 */
-
+ gpio_request(1, "A_IRDA_OFF");
+ gpio_request(11, "A_SWITCH");
+ gpio_request(15, "A_USB_ON");
+ gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */
+ gpio_direction_output(11, 0); /*A_SWITCH = 0 */
+ gpio_direction_output(15, 0); /*A_USB_ON = 0 */
}
/*----------------------------------------*/
static void __init omap_sx1_init_irq(void)