OMAP: dmtimer: enable all timers to be wakeup events

[linux-2.6-omap-h63xx.git] / arch / arm / mach-omap2 / board-overo.c

diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 82b3dc557c96736764f6fdbb235cf1f930a0a2a3..b3f6e9d81807c9197c4b9d63ef52891f82c90844 100644 (file)
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -37,20 +37,85 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-overo.h>
 #include <mach/board.h>
 #include <mach/common.h>
 #include <mach/gpio.h>
 #include <mach/gpmc.h>
 #include <mach/hardware.h>
 #include <mach/nand.h>
+#include <mach/usb.h>
 
 #include "mmc-twl4030.h"
 
+#define OVERO_GPIO_BT_XGATE    15
+#define OVERO_GPIO_W2W_NRESET  16
+#define OVERO_GPIO_BT_NRESET   164
+#define OVERO_GPIO_USBH_CPEN   168
+#define OVERO_GPIO_USBH_NRESET 183
+
 #define NAND_BLOCK_SIZE SZ_128K
 #define GPMC_CS0_BASE  0x60
 #define GPMC_CS_SIZE   0x30
 
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+       defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#include <mach/mcspi.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+       .turbo_mode     = 0,
+       .single_channel = 1,    /* 0: slave, 1: master */
+};
+
+static int ads7846_get_pendown_state(void)
+{
+       return !gpio_get_value(OVERO_GPIO_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+       .x_max                  = 0x0fff,
+       .y_max                  = 0x0fff,
+       .x_plate_ohms           = 180,
+       .pressure_max           = 255,
+       .debounce_max           = 10,
+       .debounce_tol           = 3,
+       .debounce_rep           = 1,
+       .get_pendown_state      = ads7846_get_pendown_state,
+       .keep_vref_on           = 1,
+};
+
+static struct spi_board_info overo_spi_board_info[] __initdata = {
+       {
+               .modalias               = "ads7846",
+               .bus_num                = 1,
+               .chip_select            = 0,
+               .max_speed_hz           = 1500000,
+               .controller_data        = &ads7846_mcspi_config,
+               .irq                    = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
+               .platform_data          = &ads7846_config,
+       }
+};
+
+static void __init overo_ads7846_init(void)
+{
+       if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
+           (gpio_direction_input(OVERO_GPIO_PENDOWN) == 0)) {
+               gpio_export(OVERO_GPIO_PENDOWN, 0);
+       } else {
+               printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n");
+               return;
+       }
+
+       spi_register_board_info(overo_spi_board_info,
+                       ARRAY_SIZE(overo_spi_board_info));
+}
+
+#else
+static inline void __init overo_ads7846_init(void) { return; }
+#endif
+
 static struct mtd_partition overo_nand_partitions[] = {
        {
                .name           = "xloader",
@@ -174,7 +239,7 @@ static int __init overo_i2c_init(void)
 
 static void __init overo_init_irq(void)
 {
-       omap2_init_common_hw();
+       omap2_init_common_hw(NULL);
        omap_init_irq();
        omap_gpio_init();
 }
@@ -209,6 +274,7 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
                .wires          = 4,
                .gpio_cd        = -EINVAL,
                .gpio_wp        = -EINVAL,
+               .transceiver    = true,
        },
        {}      /* Terminator */
 };
@@ -222,6 +288,8 @@ static void __init overo_init(void)
        omap_serial_init();
        twl4030_mmc_init(mmc);
        overo_flash_init();
+       usb_musb_init();
+       overo_ads7846_init();
 
        if ((gpio_request(OVERO_GPIO_W2W_NRESET,
                          "OVERO_GPIO_W2W_NRESET") == 0) &&