Pull cpuidle into release branch

[linux-2.6-omap-h63xx.git] / arch / arm / mach-s3c2410 / mach-bast.c

diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index f01de807b72fd0c30f4d42dc297cf39cb207d779..587864fe25fb09f169b519dcc16d54dbb13c773d 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -20,6 +20,8 @@
 #include <linux/platform_device.h>
 #include <linux/dm9000.h>
 
+#include <net/ax88796.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -34,13 +36,13 @@
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
-#include <asm/arch/regs-serial.h>
+#include <asm/plat-s3c/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-mem.h>
 #include <asm/arch/regs-lcd.h>
 
-#include <asm/arch/nand.h>
-#include <asm/arch/iic.h>
+#include <asm/plat-s3c/nand.h>
+#include <asm/plat-s3c/iic.h>
 #include <asm/arch/fb.h>
 
 #include <linux/mtd/mtd.h>
@@ -409,36 +411,126 @@ static struct s3c2410_platform_i2c bast_i2c_info = {
        .max_freq       = 130*1000,
 };
 
+/* Asix AX88796 10/100 ethernet controller */
 
-static struct s3c2410fb_mach_info __initdata bast_lcd_info = {
-       .width          = 640,
-       .height         = 480,
+static struct ax_plat_data bast_asix_platdata = {
+       .flags          = AXFLG_MAC_FROMDEV,
+       .wordlength     = 2,
+       .dcr_val        = 0x48,
+       .rcr_val        = 0x40,
+};
 
-       .xres           = {
-               .min            = 320,
-               .max            = 1024,
-               .defval         = 640,
+static struct resource bast_asix_resource[] = {
+       [0] = {
+               .start = S3C2410_CS5 + BAST_PA_ASIXNET,
+               .end   = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20) - 1,
+               .flags = IORESOURCE_MEM,
        },
+       [1] = {
+               .start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20),
+               .end   = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20),
+               .flags = IORESOURCE_MEM,
+       },
+       [2] = {
+               .start = IRQ_ASIX,
+               .end   = IRQ_ASIX,
+               .flags = IORESOURCE_IRQ
+       }
+};
+
+static struct platform_device bast_device_asix = {
+       .name           = "ax88796",
+       .id             = 0,
+       .num_resources  = ARRAY_SIZE(bast_asix_resource),
+       .resource       = bast_asix_resource,
+       .dev            = {
+               .platform_data = &bast_asix_platdata
+       }
+};
 
-       .yres           = {
-               .min            = 240,
-               .max            = 600,
-               .defval         = 480,
+/* Asix AX88796 10/100 ethernet controller parallel port */
+
+static struct resource bast_asixpp_resource[] = {
+       [0] = {
+               .start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20),
+               .end   = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1b * 0x20) - 1,
+               .flags = IORESOURCE_MEM,
+       }
+};
+
+static struct platform_device bast_device_axpp = {
+       .name           = "ax88796-pp",
+       .id             = 0,
+       .num_resources  = ARRAY_SIZE(bast_asixpp_resource),
+       .resource       = bast_asixpp_resource,
+};
+
+/* LCD/VGA controller */
+
+static struct s3c2410fb_display __initdata bast_lcd_info[] = {
+       {
+               .type           = S3C2410_LCDCON1_TFT,
+               .width          = 640,
+               .height         = 480,
+
+               .pixclock       = 33333,
+               .xres           = 640,
+               .yres           = 480,
+               .bpp            = 4,
+               .left_margin    = 40,
+               .right_margin   = 20,
+               .hsync_len      = 88,
+               .upper_margin   = 30,
+               .lower_margin   = 32,
+               .vsync_len      = 3,
+
+               .lcdcon5        = 0x00014b02,
        },
+       {
+               .type           = S3C2410_LCDCON1_TFT,
+               .width          = 640,
+               .height         = 480,
+
+               .pixclock       = 33333,
+               .xres           = 640,
+               .yres           = 480,
+               .bpp            = 8,
+               .left_margin    = 40,
+               .right_margin   = 20,
+               .hsync_len      = 88,
+               .upper_margin   = 30,
+               .lower_margin   = 32,
+               .vsync_len      = 3,
 
-       .bpp            = {
-               .min            = 4,
-               .max            = 16,
-               .defval         = 8,
+               .lcdcon5        = 0x00014b02,
        },
+       {
+               .type           = S3C2410_LCDCON1_TFT,
+               .width          = 640,
+               .height         = 480,
+
+               .pixclock       = 33333,
+               .xres           = 640,
+               .yres           = 480,
+               .bpp            = 16,
+               .left_margin    = 40,
+               .right_margin   = 20,
+               .hsync_len      = 88,
+               .upper_margin   = 30,
+               .lower_margin   = 32,
+               .vsync_len      = 3,
 
-       .regs           = {
-               .lcdcon1        = 0x00000176,
-               .lcdcon2        = 0x1d77c7c2,
-               .lcdcon3        = 0x013a7f13,
-               .lcdcon4        = 0x00000057,
                .lcdcon5        = 0x00014b02,
-       }
+       },
+};
+
+/* LCD/VGA controller */
+
+static struct s3c2410fb_mach_info __initdata bast_fb_info = {
+
+       .displays = bast_lcd_info,
+       .num_displays = ARRAY_SIZE(bast_lcd_info),
+       .default_display = 4,
 };
 
 /* Standard BAST devices */
@@ -453,6 +545,8 @@ static struct platform_device *bast_devices[] __initdata = {
        &s3c_device_nand,
        &bast_device_nor,
        &bast_device_dm9k,
+       &bast_device_asix,
+       &bast_device_axpp,
        &bast_sio,
 };
 
@@ -493,7 +587,7 @@ static void __init bast_map_io(void)
 
 static void __init bast_init(void)
 {
-       s3c24xx_fb_set_platdata(&bast_lcd_info);
+       s3c24xx_fb_set_platdata(&bast_fb_info);
        platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 }