#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/irq.h>
#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-
-#include <asm/arch/regs-serial.h>
+#include <asm/plat-s3c/regs-serial.h>
#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-clock.h>
#include <asm/arch/h1940.h>
#include <asm/arch/h1940-latch.h>
#include <asm/arch/fb.h>
+#include <asm/plat-s3c24xx/udc.h>
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/devs.h>
EXPORT_SYMBOL_GPL(h1940_latch_control);
+static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+ printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
+
+ switch (cmd)
+ {
+ case S3C2410_UDC_P_ENABLE :
+ h1940_latch_control(0, H1940_LATCH_USB_DP);
+ break;
+ case S3C2410_UDC_P_DISABLE :
+ h1940_latch_control(H1940_LATCH_USB_DP, 0);
+ break;
+ case S3C2410_UDC_P_RESET :
+ break;
+ default:
+ break;
+ }
+}
+
+static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
+ .udc_command = h1940_udc_pullup,
+ .vbus_pin = S3C2410_GPG5,
+ .vbus_pin_inverted = 1,
+};
+
/**
* Set lcd on or off
**/
-static struct s3c2410fb_mach_info h1940_lcdcfg __initdata = {
- .fixed_syncs= 1,
- .regs={
- .lcdcon1= S3C2410_LCDCON1_TFT16BPP | \
- S3C2410_LCDCON1_TFT | \
- S3C2410_LCDCON1_CLKVAL(0x0C),
-
- .lcdcon2= S3C2410_LCDCON2_VBPD(7) | \
- S3C2410_LCDCON2_LINEVAL(319) | \
- S3C2410_LCDCON2_VFPD(6) | \
- S3C2410_LCDCON2_VSPW(0),
-
- .lcdcon3= S3C2410_LCDCON3_HBPD(19) | \
- S3C2410_LCDCON3_HOZVAL(239) | \
- S3C2410_LCDCON3_HFPD(7),
-
- .lcdcon4= S3C2410_LCDCON4_MVAL(0) | \
- S3C2410_LCDCON4_HSPW(3),
-
- .lcdcon5= S3C2410_LCDCON5_FRM565 | \
- S3C2410_LCDCON5_INVVLINE | \
- S3C2410_LCDCON5_HWSWP,
- },
+static struct s3c2410fb_display h1940_lcd __initdata = {
+ .lcdcon5= S3C2410_LCDCON5_FRM565 | \
+ S3C2410_LCDCON5_INVVLINE | \
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 240,
+ .height = 320,
+ .pixclock = 260000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .left_margin = 20,
+ .right_margin = 8,
+ .hsync_len = 4,
+ .upper_margin = 8,
+ .lower_margin = 7,
+ .vsync_len = 1,
+};
+
+static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
+ .displays = &h1940_lcd,
+ .num_displays = 1,
+ .default_display = 0,
+
.lpcsel= 0x02,
.gpccon= 0xaa940659,
.gpccon_mask= 0xffffffff,
.gpdcon_mask= 0xffffffff,
.gpdup= 0x0000faff,
.gpdup_mask= 0xffffffff,
+};
+
+static struct platform_device s3c_device_leds = {
+ .name = "h1940-leds",
+ .id = -1,
+};
- .width= 240,
- .height= 320,
- .xres= {240,240,240},
- .yres= {320,320,320},
- .bpp= {16,16,16},
+static struct platform_device s3c_device_bluetooth = {
+ .name = "h1940-bt",
+ .id = -1,
};
static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_iis,
-};
-
-static struct s3c24xx_board h1940_board __initdata = {
- .devices = h1940_devices,
- .devices_count = ARRAY_SIZE(h1940_devices)
+ &s3c_device_usbgadget,
+ &s3c_device_leds,
+ &s3c_device_bluetooth,
};
static void __init h1940_map_io(void)
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
- s3c24xx_set_board(&h1940_board);
/* setup PM */
+#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+#endif
s3c2410_pm_init();
}
static void __init h1940_init(void)
{
- s3c24xx_fb_set_platdata(&h1940_lcdcfg);
+ u32 tmp;
+
+ s3c24xx_fb_set_platdata(&h1940_fb_info);
+ s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ tmp = (
+ 0x78 << S3C2410_PLLCON_MDIVSHIFT)
+ | (0x02 << S3C2410_PLLCON_PDIVSHIFT)
+ | (0x03 << S3C2410_PLLCON_SDIVSHIFT);
+ writel(tmp, S3C2410_UPLLCON);
+
+ platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
}
MACHINE_START(H1940, "IPAQ-H1940")
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = h1940_map_io,
.init_irq = h1940_init_irq,
- .init_machine = h1940_init,
+ .init_machine = h1940_init,
.timer = &s3c24xx_timer,
MACHINE_END