Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart

[linux-2.6-omap-h63xx.git] / arch / arm / mach-s3c2410 / mach-n30.c

diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 79044d9bce38c281644c70a94a5ffd58348dcbda..66bf5bb2b3db2a2b18120379e098496a2700decc 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -110,34 +110,24 @@ void __init n30_init_irq(void)
        s3c24xx_init_irq();
 }
 
-
-static int n30_usbstart_thread(void *unused)
-{
-       /* Turn off suspend on both USB ports, and switch the
-        * selectable USB port to USB device mode. */
-       writel(readl(S3C2410_MISCCR) & ~0x00003008, S3C2410_MISCCR);
-
-       /* Turn off the D+ pull up for 3 seconds so that the USB host
-        * at the other end will do a rescan of the USB bus.  */
-       s3c2410_gpio_setpin(S3C2410_GPB3, 0);
-
-       msleep_interruptible(3*HZ);
-
-       s3c2410_gpio_setpin(S3C2410_GPB3, 1);
-
-       return 0;
-}
-
+/* GPB3 is the line that controls the pull-up for the USB D+ line */
 
 void __init n30_init(void)
 {
        s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
 
-       kthread_run(n30_usbstart_thread, NULL, "n30_usbstart");
+       /* Turn off suspend on both USB ports, and switch the
+        * selectable USB port to USB device mode. */
+
+       s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+                             S3C2410_MISCCR_USBSUSPND0 |
+                             S3C2410_MISCCR_USBSUSPND1, 0x0);
 }
 
 MACHINE_START(N30, "Acer-N30")
-       /* Maintainer: Christer Weinigel <christer@weinigel.se>, Ben Dooks <ben-linux@fluff.org> */
+       /* Maintainer: Christer Weinigel <christer@weinigel.se>,
+                               Ben Dooks <ben-linux@fluff.org>
+       */
        .phys_ram       = S3C2410_SDRAM_PA,
        .phys_io        = S3C2410_PA_UART,
        .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,