/* linux/arch/arm/mach-s3c2440/mach-anubis.c
*
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2005,2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
+
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/regs-serial.h>
+#include <asm/plat-s3c/regs-serial.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-mem.h>
#include <asm/arch/regs-lcd.h>
-#include <asm/arch/nand.h>
+#include <asm/plat-s3c/nand.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
+#include <net/ax88796.h>
+
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/devs.h>
#include <asm/plat-s3c24xx/cpu.h>
}
};
+static struct mtd_partition anubis_default_nand_part_large[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_128K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_128K,
+ .offset = SZ_128K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
/* the Anubis has 3 selectable slots for nand-flash, the two
* on-board chip areas, as well as the external slot.
*
/* IDE channels */
+struct pata_platform_info anubis_ide_platdata = {
+ .ioport_shift = 5,
+};
+
static struct resource anubis_ide0_resource[] = {
{
.start = S3C2410_CS3,
.end = S3C2410_CS3 + (8*32) - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = S3C2410_CS3 + (1<<26),
- .end = S3C2410_CS3 + (1<<26) + (8*32) - 1,
+ .start = S3C2410_CS3 + (1<<26) + (6*32),
+ .end = S3C2410_CS3 + (1<<26) + (7*32) - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_IDE0,
};
static struct platform_device anubis_device_ide0 = {
- .name = "simtec-ide",
+ .name = "pata_platform",
.id = 0,
.num_resources = ARRAY_SIZE(anubis_ide0_resource),
.resource = anubis_ide0_resource,
+ .dev = {
+ .platform_data = &anubis_ide_platdata,
+ .coherent_dma_mask = ~0,
+ },
};
static struct resource anubis_ide1_resource[] = {
.end = S3C2410_CS4 + (8*32) - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = S3C2410_CS4 + (1<<26),
- .end = S3C2410_CS4 + (1<<26) + (8*32) - 1,
+ .start = S3C2410_CS4 + (1<<26) + (6*32),
+ .end = S3C2410_CS4 + (1<<26) + (7*32) - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_IDE0,
},
};
-
static struct platform_device anubis_device_ide1 = {
- .name = "simtec-ide",
+ .name = "pata_platform",
.id = 1,
.num_resources = ARRAY_SIZE(anubis_ide1_resource),
.resource = anubis_ide1_resource,
+ .dev = {
+ .platform_data = &anubis_ide_platdata,
+ .coherent_dma_mask = ~0,
+ },
+};
+
+/* Asix AX88796 10/100 ethernet controller */
+
+static struct ax_plat_data anubis_asix_platdata = {
+ .flags = AXFLG_MAC_FROMDEV,
+ .wordlength = 2,
+ .dcr_val = 0x48,
+ .rcr_val = 0x40,
+};
+
+static struct resource anubis_asix_resource[] = {
+ [0] = {
+ .start = S3C2410_CS5,
+ .end = S3C2410_CS5 + (0x20 * 0x20) -1,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = IRQ_ASIX,
+ .end = IRQ_ASIX,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device anubis_device_asix = {
+ .name = "ax88796",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(anubis_asix_resource),
+ .resource = anubis_asix_resource,
+ .dev = {
+ .platform_data = &anubis_asix_platdata,
+ }
+};
+
+/* SM501 */
+
+static struct resource anubis_sm501_resource[] = {
+ [0] = {
+ .start = S3C2410_CS2,
+ .end = S3C2410_CS2 + SZ_8M,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S3C2410_CS2 + SZ_64M - SZ_2M,
+ .end = S3C2410_CS2 + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_EINT0,
+ .end = IRQ_EINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sm501_initdata anubis_sm501_initdata = {
+ .gpio_high = {
+ .set = 0x3F000000, /* 24bit panel */
+ .mask = 0x0,
+ },
+ .misc_timing = {
+ .set = 0x010100, /* SDRAM timing */
+ .mask = 0x1F1F00,
+ },
+ .misc_control = {
+ .set = SM501_MISC_PNL_24BIT,
+ .mask = 0,
+ },
+
+ /* set the SDRAM and bus clocks */
+ .mclk = 72 * MHZ,
+ .m1xclk = 144 * MHZ,
+};
+
+static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
+ [0] = {
+ .pin_scl = 44,
+ .pin_sda = 45,
+ },
+ [1] = {
+ .pin_scl = 40,
+ .pin_sda = 41,
+ },
+};
+
+static struct sm501_platdata anubis_sm501_platdata = {
+ .init = &anubis_sm501_initdata,
+ .gpio_i2c = anubis_sm501_gpio_i2c,
+ .gpio_i2c_nr = ARRAY_SIZE(anubis_sm501_gpio_i2c),
+};
+
+static struct platform_device anubis_device_sm501 = {
+ .name = "sm501",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(anubis_sm501_resource),
+ .resource = anubis_sm501_resource,
+ .dev = {
+ .platform_data = &anubis_sm501_platdata,
+ },
};
/* Standard Anubis devices */
&s3c_device_nand,
&anubis_device_ide0,
&anubis_device_ide1,
+ &anubis_device_asix,
+ &anubis_device_sm501,
};
static struct clk *anubis_clocks[] = {
&s3c24xx_uclk,
};
+/* I2C devices. */
+
+static struct i2c_board_info anubis_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("tps65011", 0x48),
+ .irq = IRQ_EINT20,
+ }
+};
+
static void __init anubis_map_io(void)
{
/* initialise the clocks */
- s3c24xx_dclk0.parent = NULL;
+ s3c24xx_dclk0.parent = &clk_upll;
s3c24xx_dclk0.rate = 12*1000*1000;
- s3c24xx_dclk1.parent = NULL;
+ s3c24xx_dclk1.parent = &clk_upll;
s3c24xx_dclk1.rate = 24*1000*1000;
s3c24xx_clkout0.parent = &s3c24xx_dclk0;
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
- /* ensure that the GPIO is setup */
- s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+ /* check for the newer revision boards with large page nand */
+
+ if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
+ printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
+ __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
+ anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
+ anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
+ } else {
+ /* ensure that the GPIO is setup */
+ s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+ }
}
static void __init anubis_init(void)
{
platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
+
+ i2c_register_board_info(0, anubis_i2c_devs,
+ ARRAY_SIZE(anubis_i2c_devs));
}
projects / linux-2.6-omap-h63xx.git / blobdiff