#include <linux/serial_core.h>
#include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/h3600.h>
+#include <mach/h3600.h>
#if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
-#include <asm/arch/h3600_gpio.h>
+#include <mach/h3600_gpio.h>
#endif
#ifdef CONFIG_SA1100_H3800
-#include <asm/arch/h3600_asic.h>
+#include <mach/h3600_asic.h>
#endif
#include "generic.h"
case IPAQ_EGPIO_CODEC_NRESET:
case IPAQ_EGPIO_AUDIO_ON:
case IPAQ_EGPIO_QMUTE:
- printk("%s: error - should not be called\n", __FUNCTION__);
+ printk("%s: error - should not be called\n", __func__);
break;
case IPAQ_EGPIO_OPT_NVRAM_ON:
SET_ASIC2(GPIO2_OPT_ON_NVRAM);
static u16 asic2_data;
int result = 0;
- printk("%s %d\n", __FUNCTION__, req);
+ printk("%s %d\n", __func__, req);
switch (req) {
case PM_RESUME:
asic2_data = H3800_ASIC2_GPIOPIOD;
break;
default:
- printk("%s: unrecognized PM callback\n", __FUNCTION__);
+ printk("%s: unrecognized PM callback\n", __func__);
break;
}
return result;
#define MAX_ASIC_ISR_LOOPS 20
-/* The order of these is important - see #include <asm/arch/irqs.h> */
+/* The order of these is important - see #include <mach/irqs.h> */
static u32 kpio_irq_mask[] = {
KPIO_KEY_ALL,
KPIO_SPI_INT,
{
int i;
- if (0) printk("%s: interrupt received\n", __FUNCTION__);
+ if (0) printk("%s: interrupt received\n", __func__);
desc->chip->ack(irq);
/* KPIO */
irq = H3800_ASIC2_KPIINTFLAG;
- if (0) printk("%s KPIO 0x%08X\n", __FUNCTION__, irq);
+ if (0) printk("%s KPIO 0x%08X\n", __func__, irq);
for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++)
if (irq & kpio_irq_mask[j])
handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j);
/* GPIO2 */
irq = H3800_ASIC2_GPIINTFLAG;
- if (0) printk("%s GPIO 0x%08X\n", __FUNCTION__, irq);
+ if (0) printk("%s GPIO 0x%08X\n", __func__, irq);
for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++)
if (irq & gpio_irq_mask[j])
handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j);
}
if (i >= MAX_ASIC_ISR_LOOPS)
- printk("%s: interrupt processing overrun\n", __FUNCTION__);
+ printk("%s: interrupt processing overrun\n", __func__);
/* For level-based interrupts */
desc->chip->unmask(irq);
static struct irqaction h3800_irq = {
.name = "h3800_asic",
.handler = h3800_IRQ_demux,
- .flags = IRQF_DISABLED | IRQF_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
};
u32 kpio_int_shadow = 0;
set_irq_chip(irq, &h3800_gpio_irqchip);
}
#endif
- set_irq_type(IRQ_GPIO_H3800_ASIC, IRQT_RISING);
+ set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING);
set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux);
}