#include <asm/blackfin.h>
#include <asm/trace.h>
#if CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
ENTRY(__stext)
/* R0: argument of command line string, passed from uboot, save it */
R7 = R0;
- /* Set the SYSCFG register */
- R0 = 0x36;
- SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
+ /* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+ R0 = SYSCFG_SNEN;
+#else
+ R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
+ SYSCFG = R0;
R0 = 0;
/* Clear Out All the data and pointer Registers*/
M2 = r0;
M3 = r0;
- trace_buffer_start(p0,r0);
+ trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */
- p0.l = (IMEM_CONTROL & 0xFFFF);
- p0.h = (IMEM_CONTROL >> 16);
+ p0.l = LO(IMEM_CONTROL);
+ p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
SSYNC;
/* Turn off the dcache */
- p0.l = (DMEM_CONTROL & 0xFFFF);
- p0.h = (DMEM_CONTROL >> 16);
+ p0.l = LO(DMEM_CONTROL);
+ p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
FP = SP;
USP = SP;
+#ifdef CONFIG_EARLY_PRINTK
+ SP += -12;
+ call _init_early_exception_vectors;
+ SP += 12;
+#endif
+
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
call _bf53x_relocate_l1_mem;
#if CONFIG_BFIN_KERNEL_CLOCK
w[p2] = r0;
ssync;
+ p2.h = hi(EBIU_MBSCTL);
+ p2.l = lo(EBIU_MBSCTL);
+ r0.h = hi(CONFIG_EBIU_MBSCTLVAL);
+ r0.l = lo(CONFIG_EBIU_MBSCTLVAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_MODE);
+ p2.l = lo(EBIU_MODE);
+ r0.h = hi(CONFIG_EBIU_MODEVAL);
+ r0.l = lo(CONFIG_EBIU_MODEVAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_FCTL);
+ p2.l = lo(EBIU_FCTL);
+ r0.h = hi(CONFIG_EBIU_FCTLVAL);
+ r0.l = lo(CONFIG_EBIU_FCTLVAL);
+ [p2] = r0;
+ ssync;
+
/* This section keeps the processor in supervisor mode
* during kernel boot. Switches to user mode at end of boot.
* See page 3-9 of Hardware Reference manual for documentation.
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined (ANOMALY_05000281)
+#if ANOMALY_05000281
nop;
nop;
nop;
w[p0] = r0.l;
ssync;
- p0.l = (EBIU_SDBCTL & 0xFFFF);
- p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ p0.l = LO(EBIU_SDBCTL);
+ p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
r0 = mem_SDBCTL;
w[p0] = r0.l;
ssync;
RTS;
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-ENTRY(_bfin_reset)
- /* No more interrupts to be handled*/
- CLI R6;
- SSYNC;
-
-#if defined(CONFIG_MTD_M25P80)
-/*
- * The following code fix the SPI flash reboot issue,
- * /CS signal of the chip which is using PF10 return to GPIO mode
- */
- p0.h = hi(PORTF_FER);
- p0.l = lo(PORTF_FER);
- r0.l = 0x0000;
- w[p0] = r0.l;
- SSYNC;
-
-/* /CS return to high */
- p0.h = hi(PORTFIO);
- p0.l = lo(PORTFIO);
- r0.l = 0xFFFF;
- w[p0] = r0.l;
- SSYNC;
-
-/* Delay some time, This is necessary */
- r1.h = 0;
- r1.l = 0x400;
- p1 = r1;
- lsetup (_delay_lab1,_delay_lab1_end ) lc1 = p1;
-_delay_lab1:
- r0.h = 0;
- r0.l = 0x8000;
- p0 = r0;
- lsetup (_delay_lab0,_delay_lab0_end ) lc0 = p0;
-_delay_lab0:
- nop;
-_delay_lab0_end:
- nop;
-_delay_lab1_end:
- nop;
-#endif
-
- /* Clear the bits 13-15 in SWRST if they werent cleared */
- p0.h = hi(SWRST);
- p0.l = lo(SWRST);
- csync;
- r0.l = w[p0];
-
- /* Clear the IMASK register */
- p0.h = hi(IMASK);
- p0.l = lo(IMASK);
- r0 = 0x0;
- [p0] = r0;
-
- /* Clear the ILAT register */
- p0.h = hi(ILAT);
- p0.l = lo(ILAT);
- r0 = [p0];
- [p0] = r0;
- SSYNC;
-
- /* Disable the WDOG TIMER */
- p0.h = hi(WDOG_CTL);
- p0.l = lo(WDOG_CTL);
- r0.l = 0xAD6;
- w[p0] = r0.l;
- SSYNC;
-
- /* Clear the sticky bit incase it is already set */
- p0.h = hi(WDOG_CTL);
- p0.l = lo(WDOG_CTL);
- r0.l = 0x8AD6;
- w[p0] = r0.l;
- SSYNC;
-
- /* Program the count value */
- R0.l = 0x100;
- R0.h = 0x0;
- P0.h = hi(WDOG_CNT);
- P0.l = lo(WDOG_CNT);
- [P0] = R0;
- SSYNC;
-
- /* Program WDOG_STAT if necessary */
- P0.h = hi(WDOG_CTL);
- P0.l = lo(WDOG_CTL);
- R0 = W[P0](Z);
- CC = BITTST(R0,1);
- if !CC JUMP .LWRITESTAT;
- CC = BITTST(R0,2);
- if !CC JUMP .LWRITESTAT;
- JUMP .LSKIP_WRITE;
-
-.LWRITESTAT:
- /* When watch dog timer is enabled,
- * a write to STAT will load the contents of CNT to STAT
- */
- R0 = 0x0000(z);
- P0.h = hi(WDOG_STAT);
- P0.l = lo(WDOG_STAT)
- [P0] = R0;
- SSYNC;
-
-.LSKIP_WRITE:
- /* Enable the reset event */
- P0.h = hi(WDOG_CTL);
- P0.l = lo(WDOG_CTL);
- R0 = W[P0](Z);
- BITCLR(R0,1);
- BITCLR(R0,2);
- W[P0] = R0.L;
- SSYNC;
- NOP;
-
- /* Enable the wdog counter */
- R0 = W[P0](Z);
- BITCLR(R0,4);
- W[P0] = R0.L;
- SSYNC;
-
- IDLE;
-
- RTS;
-
.data
/*
projects / linux-2.6-omap-h63xx.git / blobdiff