#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
+#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/string.h>
#define CPU_NEHEMIAH 5
static int cpu_model;
-static unsigned int numscales=16, numvscales;
+static unsigned int numscales=16;
static unsigned int fsb;
-static int minvid, maxvid;
+
+static struct mV_pos *vrm_mV_table;
+static unsigned char *mV_vrm_table;
+struct f_msr {
+ unsigned char vrm;
+};
+static struct f_msr f_msr_table[32];
+
+static unsigned int highest_speed, lowest_speed; /* kHz */
static unsigned int minmult, maxmult;
static int can_scale_voltage;
-static int vrmrev;
static struct acpi_processor *pr = NULL;
static struct acpi_processor_cx *cx = NULL;
+static int port22_en;
/* Module parameters */
-static int dont_scale_voltage;
-
+static int scale_voltage;
+static int ignore_latency;
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
/* Clock ratios multiplied by 10 */
static int clock_ratio[32];
static int eblcr_table[32];
-static int voltage_table[32];
static unsigned int highest_speed, lowest_speed; /* kHz */
static int longhaul_version;
static struct cpufreq_frequency_table *longhaul_table;
/* For processor with BCR2 MSR */
-static void do_longhaul1(int cx_address, unsigned int clock_ratio_index)
+static void do_longhaul1(unsigned int clock_ratio_index)
{
union msr_bcr2 bcr2;
- u32 t;
rdmsrl(MSR_VIA_BCR2, bcr2.val);
/* Enable software clock multiplier */
/* Sync to timer tick */
safe_halt();
- ACPI_FLUSH_CPU_CACHE();
/* Change frequency on next halt or sleep */
wrmsrl(MSR_VIA_BCR2, bcr2.val);
- /* Invoke C3 */
- inb(cx_address);
- /* Dummy op - must do something useless after P_LVL3 read */
- t = inl(acpi_fadt.xpm_tmr_blk.address);
+ /* Invoke transition */
+ ACPI_FLUSH_CPU_CACHE();
+ halt();
/* Disable software clock multiplier */
local_irq_disable();
longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
longhaul.bits.EnableSoftBusRatio = 1;
+ if (can_scale_voltage) {
+ longhaul.bits.SoftVID = f_msr_table[clock_ratio_index].vrm;
+ longhaul.bits.EnableSoftVID = 1;
+ }
+
/* Sync to timer tick */
safe_halt();
- ACPI_FLUSH_CPU_CACHE();
/* Change frequency on next halt or sleep */
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
- /* Invoke C3 */
- inb(cx_address);
- /* Dummy op - must do something useless after P_LVL3 read */
- t = inl(acpi_fadt.xpm_tmr_blk.address);
+ if (port22_en) {
+ ACPI_FLUSH_CPU_CACHE();
+ /* Invoke C1 */
+ halt();
+ } else {
+ ACPI_FLUSH_CPU_CACHE();
+ /* Invoke C3 */
+ inb(cx_address);
+ /* Dummy op - must do something useless after P_LVL3 read */
+ t = inl(acpi_fadt.xpm_tmr_blk.address);
+ }
/* Disable bus ratio bit */
local_irq_disable();
outb(0xFF,0xA1); /* Overkill */
outb(0xFE,0x21); /* TMR0 only */
- /* Disable bus master arbitration */
- if (pr->flags.bm_check) {
+ if (pr->flags.bm_control) {
+ /* Disable bus master arbitration */
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1,
ACPI_MTX_DO_NOT_LOCK);
+ } else if (port22_en) {
+ /* Disable AGP and PCI arbiters */
+ outb(3, 0x22);
}
switch (longhaul_version) {
*/
case TYPE_LONGHAUL_V1:
case TYPE_LONGHAUL_V2:
- do_longhaul1(cx->address, clock_ratio_index);
+ do_longhaul1(clock_ratio_index);
break;
/*
* to work in practice.
*/
case TYPE_POWERSAVER:
+ /* Don't allow wakeup */
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0,
+ ACPI_MTX_DO_NOT_LOCK);
do_powersaver(cx->address, clock_ratio_index);
break;
}
- /* Enable bus master arbitration */
- if (pr->flags.bm_check) {
+ if (pr->flags.bm_control) {
+ /* Enable bus master arbitration */
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0,
ACPI_MTX_DO_NOT_LOCK);
+ } else if (port22_en) {
+ /* Enable arbiters */
+ outb(0, 0x22);
}
outb(pic2_mask,0xA1); /* restore mask */
static int __init longhaul_get_ranges(void)
{
unsigned long invalue;
- unsigned int multipliers[32]= {
- 50,30,40,100,55,35,45,95,90,70,80,60,120,75,85,65,
- -1,110,120,-1,135,115,125,105,130,150,160,140,-1,155,-1,145 };
+ unsigned int ezra_t_multipliers[32]= {
+ 90, 30, 40, 100, 55, 35, 45, 95,
+ 50, 70, 80, 60, 120, 75, 85, 65,
+ -1, 110, 120, -1, 135, 115, 125, 105,
+ 130, 150, 160, 140, -1, 155, -1, 145 };
unsigned int j, k = 0;
union msr_longhaul longhaul;
unsigned long lo, hi;
invalue = longhaul.bits.MaxMHzBR;
if (longhaul.bits.MaxMHzBR4)
invalue += 16;
- maxmult=multipliers[invalue];
+ maxmult=ezra_t_multipliers[invalue];
invalue = longhaul.bits.MinMHzBR;
if (longhaul.bits.MinMHzBR4 == 1)
minmult = 30;
else
- minmult = multipliers[invalue];
+ minmult = ezra_t_multipliers[invalue];
fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
break;
}
maxmult=longhaul_get_cpu_mult();
/* Starting with the 1.2GHz parts, theres a 200MHz bus. */
- if ((cpu_khz/1000) > 1200)
+ if ((cpu_khz/maxmult) > 13400)
fsb = 200;
else
fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
static void __init longhaul_setup_voltagescaling(void)
{
union msr_longhaul longhaul;
+ struct mV_pos minvid, maxvid;
+ unsigned int j, speed, pos, kHz_step, numvscales;
- rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
-
- if (!(longhaul.bits.RevisionID & 1))
+ rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+ if (!(longhaul.bits.RevisionID & 1)) {
+ printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n");
return;
+ }
- minvid = longhaul.bits.MinimumVID;
- maxvid = longhaul.bits.MaximumVID;
- vrmrev = longhaul.bits.VRMRev;
+ if (!longhaul.bits.VRMRev) {
+ printk (KERN_INFO PFX "VRM 8.5\n");
+ vrm_mV_table = &vrm85_mV[0];
+ mV_vrm_table = &mV_vrm85[0];
+ } else {
+ printk (KERN_INFO PFX "Mobile VRM\n");
+ vrm_mV_table = &mobilevrm_mV[0];
+ mV_vrm_table = &mV_mobilevrm[0];
+ }
+
+ minvid = vrm_mV_table[longhaul.bits.MinimumVID];
+ maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
+ numvscales = maxvid.pos - minvid.pos + 1;
+ kHz_step = (highest_speed - lowest_speed) / numvscales;
- if (minvid == 0 || maxvid == 0) {
+ if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
"Voltage scaling disabled.\n",
- minvid/1000, minvid%1000, maxvid/1000, maxvid%1000);
+ minvid.mV/1000, minvid.mV%1000, maxvid.mV/1000, maxvid.mV%1000);
return;
}
- if (minvid == maxvid) {
+ if (minvid.mV == maxvid.mV) {
printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are "
"both %d.%03d. Voltage scaling disabled\n",
- maxvid/1000, maxvid%1000);
+ maxvid.mV/1000, maxvid.mV%1000);
return;
}
- if (vrmrev==0) {
- dprintk ("VRM 8.5\n");
- memcpy (voltage_table, vrm85scales, sizeof(voltage_table));
- numvscales = (voltage_table[maxvid]-voltage_table[minvid])/25;
- } else {
- dprintk ("Mobile VRM\n");
- memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table));
- numvscales = (voltage_table[maxvid]-voltage_table[minvid])/5;
+ printk(KERN_INFO PFX "Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n",
+ maxvid.mV/1000, maxvid.mV%1000,
+ minvid.mV/1000, minvid.mV%1000,
+ numvscales);
+
+ j = 0;
+ while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
+ speed = longhaul_table[j].frequency;
+ pos = (speed - lowest_speed) / kHz_step + minvid.pos;
+ f_msr_table[longhaul_table[j].index].vrm = mV_vrm_table[pos];
+ j++;
}
- /* Current voltage isn't readable at first, so we need to
- set it to a known value. The spec says to use maxvid */
- longhaul.bits.RevisionKey = longhaul.bits.RevisionID; /* FIXME: This is bad. */
- longhaul.bits.EnableSoftVID = 1;
- longhaul.bits.SoftVID = maxvid;
- wrmsrl (MSR_VIA_LONGHAUL, longhaul.val);
-
- minvid = voltage_table[minvid];
- maxvid = voltage_table[maxvid];
-
- dprintk ("Min VID=%d.%03d Max VID=%d.%03d, %d possible voltage scales\n",
- maxvid/1000, maxvid%1000, minvid/1000, minvid%1000, numvscales);
-
can_scale_voltage = 1;
}
return 1;
}
+/* VIA don't support PM2 reg, but have something similar */
+static int enable_arbiter_disable(void)
+{
+ struct pci_dev *dev;
+ int reg;
+ u8 pci_cmd;
+
+ /* Find PLE133 host bridge */
+ reg = 0x78;
+ dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, NULL);
+ /* Find CLE266 host bridge */
+ if (dev == NULL) {
+ reg = 0x76;
+ dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_862X_0, NULL);
+ /* Find CN400 V-Link host bridge */
+ if (dev == NULL)
+ dev = pci_find_device(PCI_VENDOR_ID_VIA, 0x7259, NULL);
+
+ }
+ if (dev != NULL) {
+ /* Enable access to port 0x22 */
+ pci_read_config_byte(dev, reg, &pci_cmd);
+ if ( !(pci_cmd & 1<<7) ) {
+ pci_cmd |= 1<<7;
+ pci_write_config_byte(dev, reg, pci_cmd);
+ }
+ return 1;
+ }
+ return 0;
+}
+
static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
{
struct cpuinfo_x86 *c = cpu_data;
char *cpuname=NULL;
int ret;
- /* Check ACPI support for C3 state */
- acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX,
- &longhaul_walk_callback, NULL, (void *)&pr);
- if (pr == NULL) goto err_acpi;
-
- cx = &pr->power.states[ACPI_STATE_C3];
- if (cx == NULL || cx->latency > 1000) goto err_acpi;
-
- /* Now check what we have on this motherboard */
+ /* Check what we have on this motherboard */
switch (c->x86_model) {
case 6:
cpu_model = CPU_SAMUEL;
break;
};
+ /* Find ACPI data for processor */
+ acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX,
+ &longhaul_walk_callback, NULL, (void *)&pr);
+ if (pr == NULL)
+ goto err_acpi;
+
+ if (longhaul_version == TYPE_POWERSAVER) {
+ /* Check ACPI support for C3 state */
+ cx = &pr->power.states[ACPI_STATE_C3];
+ if (cx->address > 0 &&
+ (cx->latency <= 1000 || ignore_latency != 0) ) {
+ goto print_support_type;
+ }
+ }
+ /* Check ACPI support for bus master arbiter disable */
+ if (!pr->flags.bm_control) {
+ if (enable_arbiter_disable()) {
+ port22_en = 1;
+ } else {
+ goto err_acpi;
+ }
+ }
+print_support_type:
+ if (!port22_en) {
+ printk (KERN_INFO PFX "Using ACPI support.\n");
+ } else {
+ printk (KERN_INFO PFX "Using northbridge support.\n");
+ }
+
ret = longhaul_get_ranges();
if (ret != 0)
return ret;
if ((longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) &&
- (dont_scale_voltage==0))
+ (scale_voltage != 0))
longhaul_setup_voltagescaling();
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
return 0;
err_acpi:
- printk(KERN_ERR PFX "No ACPI support for CPU frequency changes.\n");
+ printk(KERN_ERR PFX "No ACPI support. Unsupported northbridge. Aborting.\n");
return -ENODEV;
}
#ifdef CONFIG_SMP
if (num_online_cpus() > 1) {
- return -ENODEV;
printk(KERN_ERR PFX "More than 1 CPU detected, longhaul disabled.\n");
+ return -ENODEV;
}
#endif
#ifdef CONFIG_X86_IO_APIC
switch (c->x86_model) {
case 6 ... 9:
return cpufreq_register_driver(&longhaul_driver);
+ case 10:
+ printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n");
default:
- printk (KERN_INFO PFX "Unknown VIA CPU. Contact davej@codemonkey.org.uk\n");
+ ;;
}
return -ENODEV;
kfree(longhaul_table);
}
-module_param (dont_scale_voltage, int, 0644);
-MODULE_PARM_DESC(dont_scale_voltage, "Don't scale voltage of processor");
+module_param (scale_voltage, int, 0644);
+MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
+module_param(ignore_latency, int, 0644);
+MODULE_PARM_DESC(ignore_latency, "Skip ACPI C3 latency test");
MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
late_initcall(longhaul_init);
module_exit(longhaul_exit);
-