#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/ptrace.h>
+#include <linux/tracehook.h>
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/smp.h>
# define GET_SIGSET(k,u) __get_user((k)->sig[0], &(u)->sig[0])
#endif
-long
-ia64_rt_sigsuspend (sigset_t __user *uset, size_t sigsetsize, struct sigscratch *scr)
-{
- sigset_t oldset, set;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (!access_ok(VERIFY_READ, uset, sigsetsize))
- return -EFAULT;
-
- if (GET_SIGSET(&set, uset))
- return -EFAULT;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- {
- oldset = current->blocked;
- current->blocked = set;
- recalc_sigpending();
- }
- spin_unlock_irq(¤t->sighand->siglock);
-
- /*
- * The return below usually returns to the signal handler. We need to
- * pre-set the correct error code here to ensure that the right values
- * get saved in sigcontext by ia64_do_signal.
- */
- scr->pt.r8 = EINTR;
- scr->pt.r10 = -1;
-
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (ia64_do_signal(&oldset, scr, 1))
- return -EINTR;
- }
-}
-
asmlinkage long
sys_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, long arg2,
long arg3, long arg4, long arg5, long arg6, long arg7,
if ((flags & IA64_SC_FLAG_FPH_VALID) != 0) {
struct ia64_psr *psr = ia64_psr(&scr->pt);
- __copy_from_user(current->thread.fph, &sc->sc_fr[32], 96*16);
+ err |= __copy_from_user(current->thread.fph, &sc->sc_fr[32], 96*16);
psr->mfh = 0; /* drop signal handler's fph contents... */
preempt_disable();
if (psr->dfh)
si.si_signo = SIGSEGV;
si.si_errno = 0;
si.si_code = SI_KERNEL;
- si.si_pid = current->pid;
+ si.si_pid = task_pid_vnr(current);
si.si_uid = current->uid;
si.si_addr = sc;
force_sig_info(SIGSEGV, &si, current);
setup_sigcontext (struct sigcontext __user *sc, sigset_t *mask, struct sigscratch *scr)
{
unsigned long flags = 0, ifs, cfm, nat;
- long err;
+ long err = 0;
ifs = scr->pt.cr_ifs;
ia64_flush_fph(current);
if ((current->thread.flags & IA64_THREAD_FPH_VALID)) {
flags |= IA64_SC_FLAG_FPH_VALID;
- __copy_to_user(&sc->sc_fr[32], current->thread.fph, 96*16);
+ err = __copy_to_user(&sc->sc_fr[32], current->thread.fph, 96*16);
}
nat = ia64_get_scratch_nat_bits(&scr->pt, scr->scratch_unat);
- err = __put_user(flags, &sc->sc_flags);
+ err |= __put_user(flags, &sc->sc_flags);
err |= __put_user(nat, &sc->sc_nat);
err |= PUT_SIGSET(mask, &sc->sc_mask);
err |= __put_user(cfm, &sc->sc_cfm);
err |= __copy_to_user(&sc->sc_gr[15], &scr->pt.r15, 8); /* r15 */
err |= __put_user(scr->pt.cr_iip + ia64_psr(&scr->pt)->ri, &sc->sc_ip);
- if (flags & IA64_SC_FLAG_IN_SYSCALL) {
- /* Clear scratch registers if the signal interrupted a system call. */
- err |= __put_user(0, &sc->sc_ar_ccv); /* ar.ccv */
- err |= __put_user(0, &sc->sc_br[7]); /* b7 */
- err |= __put_user(0, &sc->sc_gr[14]); /* r14 */
- err |= __clear_user(&sc->sc_ar25, 2*8); /* ar.csd & ar.ssd */
- err |= __clear_user(&sc->sc_gr[2], 2*8); /* r2-r3 */
- err |= __clear_user(&sc->sc_gr[16], 16*8); /* r16-r31 */
- } else {
+ if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) {
/* Copy scratch regs to sigcontext if the signal didn't interrupt a syscall. */
err |= __put_user(scr->pt.ar_ccv, &sc->sc_ar_ccv); /* ar.ccv */
err |= __put_user(scr->pt.b7, &sc->sc_br[7]); /* b7 */
si.si_signo = SIGSEGV;
si.si_errno = 0;
si.si_code = SI_KERNEL;
- si.si_pid = current->pid;
+ si.si_pid = task_pid_vnr(current);
si.si_uid = current->uid;
si.si_addr = addr;
force_sig_info(SIGSEGV, &si, current);
new_sp = scr->pt.r12;
tramp_addr = (unsigned long) __kernel_sigtramp;
- if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags(new_sp) == 0) {
- new_sp = current->sas_ss_sp + current->sas_ss_size;
- /*
- * We need to check for the register stack being on the signal stack
- * separately, because it's switched separately (memory stack is switched
- * in the kernel, register stack is switched in the signal trampoline).
- */
- if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
- new_rbs = (current->sas_ss_sp + sizeof(long) - 1) & ~(sizeof(long) - 1);
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ int onstack = sas_ss_flags(new_sp);
+
+ if (onstack == 0) {
+ new_sp = current->sas_ss_sp + current->sas_ss_size;
+ /*
+ * We need to check for the register stack being on the
+ * signal stack separately, because it's switched
+ * separately (memory stack is switched in the kernel,
+ * register stack is switched in the signal trampoline).
+ */
+ if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
+ new_rbs = ALIGN(current->sas_ss_sp,
+ sizeof(long));
+ } else if (onstack == SS_ONSTACK) {
+ unsigned long check_sp;
+
+ /*
+ * If we are on the alternate signal stack and would
+ * overflow it, don't. Return an always-bogus address
+ * instead so we will die with SIGSEGV.
+ */
+ check_sp = (new_sp - sizeof(*frame)) & -STACK_ALIGN;
+ if (!likely(on_sig_stack(check_sp)))
+ return force_sigsegv_info(sig, (void __user *)
+ check_sp);
+ }
}
frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN);
sigaddset(¤t->blocked, sig);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
+
+ /*
+ * Let tracing know that we've done the handler setup.
+ */
+ tracehook_signal_handler(sig, info, ka, &scr->pt,
+ test_thread_flag(TIF_SINGLESTEP));
+
return 1;
}
* Note that `init' is a special process: it doesn't get signals it doesn't want to
* handle. Thus you cannot kill init even with a SIGKILL even by mistake.
*/
-long
-ia64_do_signal (sigset_t *oldset, struct sigscratch *scr, long in_syscall)
+void
+ia64_do_signal (struct sigscratch *scr, long in_syscall)
{
struct k_sigaction ka;
+ sigset_t *oldset;
siginfo_t info;
long restart = in_syscall;
long errno = scr->pt.r8;
* doing anything if so.
*/
if (!user_mode(&scr->pt))
- return 0;
+ return;
- if (!oldset)
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK)
+ oldset = ¤t->saved_sigmask;
+ else
oldset = ¤t->blocked;
/*
* Whee! Actually deliver the signal. If the delivery failed, we need to
* continue to iterate in this loop so we can deliver the SIGSEGV...
*/
- if (handle_signal(signr, &ka, &info, oldset, scr))
- return 1;
+ if (handle_signal(signr, &ka, &info, oldset, scr)) {
+ /*
+ * A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TS_RESTORE_SIGMASK flag.
+ */
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+ return;
+ }
}
/* Did we come from a system call? */
}
}
}
- return 0;
+
+ /* if there's no signal to deliver, we just put the saved sigmask
+ * back */
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
}
projects / linux-2.6-omap-h63xx.git / blobdiff