Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6

[linux-2.6-omap-h63xx.git] / arch / mips / Kconfig

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 01740ef7782425262da5679efe3836bb06dcab97..ade230d445d9fd1ed952bc191720e60c679d9073 100644 (file)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1,6 +1,8 @@
 config MIPS
        bool
        default y
+       select HAVE_IDE
+       select HAVE_OPROFILE
        # Horrible source of confusion.  Die, die, die ...
        select EMBEDDED
        select RTC_LIB
@@ -37,16 +39,6 @@ config BASLER_EXCITE
          The eXcite is a smart camera platform manufactured by
          Basler Vision Technologies AG.
 
-config BASLER_EXCITE_PROTOTYPE
-       bool "Support for pre-release units"
-       depends on BASLER_EXCITE
-       default n
-       help
-         Pre-series (prototype) units are different from later ones in
-         some ways. Select this option if you have one of these. Please
-         note that a kernel built with this option selected will not be
-         able to run on normal units.
-
 config BCM47XX
        bool "BCM47XX based boards"
        select CEVT_R4K
@@ -82,7 +74,7 @@ config MIPS_COBALT
        select SYS_HAS_CPU_NEVADA
        select SYS_HAS_EARLY_PRINTK
        select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+       select SYS_SUPPORTS_64BIT_KERNEL
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select GENERIC_HARDIRQS_NO__DO_IRQ
 
@@ -190,6 +182,7 @@ config LEMOTE_FULONG
 config MIPS_ATLAS
        bool "MIPS Atlas board"
        select BOOT_ELF32
+       select BOOT_RAW
        select CEVT_R4K
        select CSRC_R4K
        select DMA_NONCOHERENT
@@ -222,6 +215,7 @@ config MIPS_MALTA
        bool "MIPS Malta board"
        select ARCH_MAY_HAVE_PC_FDC
        select BOOT_ELF32
+       select BOOT_RAW
        select CEVT_R4K
        select CSRC_R4K
        select DMA_NONCOHERENT
@@ -367,34 +361,6 @@ config PMC_YOSEMITE
          Yosemite is an evaluation board for the RM9000x2 processor
          manufactured by PMC-Sierra.
 
-config QEMU
-       bool "Qemu"
-       select CEVT_R4K
-       select CSRC_R4K
-       select DMA_COHERENT
-       select GENERIC_ISA_DMA
-       select HAVE_STD_PC_SERIAL_PORT
-       select I8253
-       select I8259
-       select IRQ_CPU
-       select ISA
-       select SWAP_IO_SPACE
-       select SYS_HAS_CPU_MIPS32_R1
-       select SYS_HAS_EARLY_PRINTK
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select GENERIC_HARDIRQS_NO__DO_IRQ
-       select NR_CPUS_DEFAULT_1
-       select SYS_SUPPORTS_SMP
-       help
-         Qemu is a software emulator which among other architectures also
-         can simulate a MIPS32 4Kc system.  This patch adds support for the
-         system architecture that currently is being simulated by Qemu.  It
-         will eventually be removed again when Qemu has the capability to
-         simulate actual MIPS hardware platforms.  More information on Qemu
-         can be found at http://www.linux-mips.org/wiki/Qemu.
-
 config SGI_IP22
        bool "SGI IP22 (Indy/Indigo2)"
        select ARC
@@ -602,6 +568,7 @@ config SNI_RM
        bool "SNI RM200/300/400"
        select ARC if CPU_LITTLE_ENDIAN
        select ARC32 if CPU_LITTLE_ENDIAN
+       select SNIPROM if CPU_BIG_ENDIAN
        select ARCH_MAY_HAVE_PC_FDC
        select BOOT_ELF32
        select CEVT_R4K
@@ -717,6 +684,7 @@ config WR_PPMC
 endchoice
 
 source "arch/mips/au1000/Kconfig"
+source "arch/mips/basler/excite/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
@@ -728,6 +696,11 @@ source "arch/mips/vr41xx/Kconfig"
 
 endmenu
 
+config GENERIC_LOCKBREAK
+       bool
+       default y
+       depends on SMP && PREEMPT
+
 config RWSEM_GENERIC_SPINLOCK
        bool
        default y
@@ -1003,6 +976,9 @@ config DEFAULT_SGI_PARTITION
 config ARC32
        bool
 
+config SNIPROM
+       bool
+
 config BOOT_ELF32
        bool
 
@@ -1780,8 +1756,8 @@ config SMP
          People using multiprocessor machines who say Y here should also say
          Y to "Enhanced Real Time Clock Support", below.
 
-         See also the <file:Documentation/smp.txt> and the SMP-HOWTO
-         available at <http://www.tldp.org/docs.html#howto>.
+         See also the SMP-HOWTO available at
+         <http://www.tldp.org/docs.html#howto>.
 
          If you don't know what to do here, say N.
 
@@ -1987,11 +1963,6 @@ config PCI
          your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
          say Y, otherwise N.
 
-         The PCI-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>, contains valuable
-         information about which PCI hardware does work under Linux and which
-         doesn't.
-
 config PCI_DOMAINS
        bool
 
@@ -2112,6 +2083,10 @@ endmenu
 
 menu "Power management options"
 
+config ARCH_SUSPEND_POSSIBLE
+       def_bool y
+       depends on !SMP
+
 source "kernel/power/Kconfig"
 
 endmenu
@@ -2122,8 +2097,6 @@ source "drivers/Kconfig"
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/mips/Kconfig.debug"
 
 source "security/Kconfig"