V4L/DVB (8247): Fix a const pointer assignment error in the drx397xD demodulator...

[linux-2.6-omap-h63xx.git] / arch / mips / Kconfig

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index a0381427ec5c7483b7c1d240a0aad74f96925e6e..b9c754f4070cc131d0420fea6af9570106eb7978 100644 (file)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -330,6 +330,7 @@ config SGI_IP22
        select SGI_HAS_DS1286
        select SGI_HAS_I8042
        select SGI_HAS_INDYDOG
+       select SGI_HAS_HAL2
        select SGI_HAS_SEEQ
        select SGI_HAS_WD93
        select SGI_HAS_ZILOG
@@ -385,6 +386,7 @@ config SGI_IP28
        select SGI_HAS_DS1286
        select SGI_HAS_I8042
        select SGI_HAS_INDYDOG
+       select SGI_HAS_HAL2
        select SGI_HAS_SEEQ
        select SGI_HAS_WD93
        select SGI_HAS_ZILOG
@@ -550,65 +552,29 @@ config SNI_RM
          Technology and now in turn merged with Fujitsu.  Say Y here to
          support this machine type.
 
-config TOSHIBA_JMR3927
-       bool "Toshiba JMR-TX3927 board"
-       select CEVT_TXX9
-       select DMA_NONCOHERENT
-       select HW_HAS_PCI
-       select MIPS_TX3927
-       select IRQ_TXX9
-       select SWAP_IO_SPACE
-       select SYS_HAS_CPU_TX39XX
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select GENERIC_HARDIRQS_NO__DO_IRQ
-       select GPIO_TXX9
+config MACH_TX39XX
+       bool "Toshiba TX39 series based machines"
 
-config TOSHIBA_RBTX4927
-       bool "Toshiba RBTX49[23]7 board"
-       select CEVT_R4K
-       select CSRC_R4K
-       select CEVT_TXX9
-       select DMA_NONCOHERENT
-       select HAS_TXX9_SERIAL
-       select HW_HAS_PCI
-       select IRQ_CPU
-       select IRQ_TXX9
-       select I8259 if TOSHIBA_FPCIB0
-       select SWAP_IO_SPACE
-       select SYS_HAS_CPU_TX49XX
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_64BIT_KERNEL
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_SUPPORTS_KGDB
-       select GENERIC_HARDIRQS_NO__DO_IRQ
-       help
-         This Toshiba board is based on the TX4927 processor. Say Y here to
-         support this machine type
+config MACH_TX49XX
+       bool "Toshiba TX49 series based machines"
 
-config TOSHIBA_RBTX4938
-       bool "Toshiba RBTX4938 board"
+config MIKROTIK_RB532
+       bool "Mikrotik RB532 boards"
        select CEVT_R4K
        select CSRC_R4K
-       select CEVT_TXX9
        select DMA_NONCOHERENT
-       select HAS_TXX9_SERIAL
+       select GENERIC_HARDIRQS_NO__DO_IRQ
        select HW_HAS_PCI
        select IRQ_CPU
-       select IRQ_TXX9
-       select SWAP_IO_SPACE
-       select SYS_HAS_CPU_TX49XX
+       select SYS_HAS_CPU_MIPS32_R1
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_LITTLE_ENDIAN
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_SUPPORTS_KGDB
-       select GENERIC_HARDIRQS_NO__DO_IRQ
-       select GPIO_TXX9
+       select SWAP_IO_SPACE
+       select BOOT_RAW
+       select GENERIC_GPIO
        help
-         This Toshiba board is based on the TX4938 processor. Say Y here to
-         support this machine type
+         Support the Mikrotik(tm) RouterBoard 532 series,
+         based on the IDT RC32434 SoC.
 
 config WR_PPMC
        bool "Wind River PPMC board"
@@ -642,8 +608,7 @@ source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
-source "arch/mips/tx4927/Kconfig"
-source "arch/mips/tx4938/Kconfig"
+source "arch/mips/txx9/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
 
 endmenu
@@ -887,10 +852,6 @@ config PCI_GT64XXX_PCI0
 config NO_EXCEPT_FILL
        bool
 
-config MIPS_TX3927
-       bool
-       select HAS_TXX9_SERIAL
-
 config MIPS_RM9122
        bool
        select SERIAL_RM9000
@@ -927,6 +888,9 @@ config SGI_HAS_DS1286
 config SGI_HAS_INDYDOG
        bool
 
+config SGI_HAS_HAL2
+       bool
+
 config SGI_HAS_SEEQ
        bool
 
@@ -953,7 +917,7 @@ config BOOT_ELF32
 
 config MIPS_L1_CACHE_SHIFT
        int
-       default "4" if MACH_DECSTATION
+       default "4" if MACH_DECSTATION || MIKROTIK_RB532
        default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM
        default "4" if PMC_MSP4200_EVAL
        default "5"
@@ -1711,6 +1675,7 @@ config SMP
        bool "Multi-Processing support"
        depends on SYS_SUPPORTS_SMP
        select IRQ_PER_CPU
+       select USE_GENERIC_SMP_HELPERS
        help
          This enables support for systems with more than one CPU. If you have
          a system with only one CPU, like most personal computers, say N. If