Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux...

[linux-2.6-omap-h63xx.git] / arch / mips / rb532 / devices.c

diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index c1c29181bd4641de62977a19107a4d5ad64734c0..4a5f05b662aef219fbbc6dd28b8326b0f6b7c889 100644 (file)
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -24,6 +24,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/serial_8250.h>
 
 #include <asm/bootinfo.h>
 
@@ -39,6 +40,29 @@
 #define ETH0_RX_DMA_ADDR  (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
 #define ETH0_TX_DMA_ADDR  (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
 
+extern unsigned int idt_cpu_freq;
+
+static struct mpmc_device dev3;
+
+void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
+{
+       unsigned long flags;
+
+       spin_lock_irqsave(&dev3.lock, flags);
+
+       dev3.state = (dev3.state | or_mask) & ~nand_mask;
+       writeb(dev3.state, dev3.base);
+
+       spin_unlock_irqrestore(&dev3.lock, flags);
+}
+EXPORT_SYMBOL(set_latch_u5);
+
+unsigned char get_latch_u5(void)
+{
+       return dev3.state;
+}
+EXPORT_SYMBOL(get_latch_u5);
+
 static struct resource korina_dev0_res[] = {
        {
                .name = "korina_regs",
@@ -86,7 +110,7 @@ static struct korina_device korina_dev0_data = {
 static struct platform_device korina_dev0 = {
        .id = -1,
        .name = "korina",
-       .dev.platform_data = &korina_dev0_data,
+       .dev.driver_data = &korina_dev0_data,
        .resource = korina_dev0_res,
        .num_resources = ARRAY_SIZE(korina_dev0_res),
 };
@@ -214,12 +238,32 @@ static struct platform_device rb532_wdt = {
        .num_resources  = ARRAY_SIZE(rb532_wdt_res),
 };
 
+static struct plat_serial8250_port rb532_uart_res[] = {
+       {
+               .membase        = (char *)KSEG1ADDR(REGBASE + UART0BASE),
+               .irq            = UART0_IRQ,
+               .regshift       = 2,
+               .iotype         = UPIO_MEM,
+               .flags          = UPF_BOOT_AUTOCONF,
+       },
+       {
+               .flags          = 0,
+       }
+};
+
+static struct platform_device rb532_uart = {
+       .name              = "serial8250",
+       .id                = PLAT8250_DEV_PLATFORM,
+       .dev.platform_data = &rb532_uart_res,
+};
+
 static struct platform_device *rb532_devs[] = {
        &korina_dev0,
        &nand_slot0,
        &cf_slot0,
        &rb532_led,
        &rb532_button,
+       &rb532_uart,
        &rb532_wdt
 };
 
@@ -291,9 +335,20 @@ static int __init plat_setup_devices(void)
        nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE);
        nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
 
+       /* Read and map device controller 3 */
+       dev3.base = ioremap_nocache(readl(IDT434_REG_BASE + DEV3BASE), 1);
+
+       if (!dev3.base) {
+               printk(KERN_ERR "rb532: cannot remap device controller 3\n");
+               return -ENXIO;
+       }
+
        /* Initialise the NAND device */
        rb532_nand_setup();
 
+       /* set the uart clock to the current cpu frequency */
+       rb532_uart_res[0].uartclk = idt_cpu_freq;
+
        return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
 }