#size-cells = <1>;
model = "amcc,bamboo";
compatible = "amcc,bamboo";
- dcr-parent = <&/cpus/PowerPC,440EP@0>;
+ dcr-parent = <&/cpus/cpu@0>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ serial2 = &UART2;
+ serial3 = &UART3;
+ };
cpus {
#address-cells = <1>;
#size-cells = <0>;
- PowerPC,440EP@0 {
+ cpu@0 {
device_type = "cpu";
+ model = "PowerPC,440EP";
reg = <0>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
dcr-reg = <180 62>;
num-tx-chans = <4>;
- num-rx-chans = <4>;
+ num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
interrupts = <0 1 2 3 4>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
/*RXEOB*/ 1 &UIC0 b 4
/*SERR*/ 2 &UIC1 0 4
/*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 3 4>;
+ /*RXDE*/ 4 &UIC1 2 4>;
};
POB0: opb {
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
- ranges;
interrupts = <5 1>;
interrupt-parent = <&UIC1>;
};
};
IIC0: i2c@ef600700 {
- device_type = "i2c";
compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
reg = <ef600700 14>;
interrupt-parent = <&UIC0>;
};
IIC1: i2c@ef600800 {
- device_type = "i2c";
compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
reg = <ef600800 14>;
interrupt-parent = <&UIC0>;
};
ZMII0: emac-zmii@ef600d00 {
- device_type = "zmii-interface";
compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
reg = <ef600d00 c>;
};
EMAC0: ethernet@ef600e00 {
+ linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rmii";
- phy-map = <00000001>;
+ phy-map = <00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
};
EMAC1: ethernet@ef600f00 {
+ linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rmii";
- phy-map = <00000001>;
+ phy-map = <00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
};
+
+ usb@ef601000 {
+ compatible = "ohci-be";
+ reg = <ef601000 80>;
+ interrupts = <8 1 9 1>;
+ interrupt-parent = < &UIC1 >;
+ };
+ };
+
+ PCI0: pci@ec000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+ primary;
+ reg = <0 eec00000 8 /* Config space access */
+ 0 eed00000 4 /* IACK */
+ 0 eed00000 4 /* Special cycle */
+ 0 ef400000 40>; /* Internal registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed. Chip supports a second
+ * IO range but we don't use it for now
+ */
+ ranges = <02000000 0 a0000000 0 a0000000 0 20000000
+ 01000000 0 00000000 0 e8000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* Bamboo has all 4 IRQ pins tied together per slot */
+ interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map = <
+ /* IDSEL 1 */
+ 0800 0 0 0 &UIC0 1c 8
+
+ /* IDSEL 2 */
+ 1000 0 0 0 &UIC0 1b 8
+
+ /* IDSEL 3 */
+ 1800 0 0 0 &UIC0 1a 8
+
+ /* IDSEL 4 */
+ 2000 0 0 0 &UIC0 19 8
+ >;
};
};
chosen {
linux,stdout-path = "/plb/opb/serial@ef600300";
- bootargs = "console=ttyS0,115200";
};
};