XXXX add flash parts, rtc, ??
-build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
-
-
*/
/ {
- linux,phandle = <1000>;
model = "KuroboxHD";
compatible = "linkstation";
#address-cells = <1>;
#size-cells = <1>;
cpus {
- linux,phandle = <2000>;
- #cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
PowerPC,603e { /* Really 8241 */
- linux,phandle = <2100>;
device_type = "cpu";
reg = <0>;
- clock-frequency = <bebc200>; /* Fixed by bootwrapper */
- timebase-frequency = <1743000>; /* Fixed by bootwrapper */
- bus-frequency = <0>; /* From bootloader */
+ clock-frequency = <bebc200>; /* Fixed by bootloader */
+ timebase-frequency = <1743000>; /* Fixed by bootloader */
+ bus-frequency = <0>; /* Fixed by bootloader */
/* Following required by dtc but not used */
- i-cache-line-size = <0>;
- d-cache-line-size = <0>;
i-cache-size = <4000>;
d-cache-size = <4000>;
};
};
memory {
- linux,phandle = <3000>;
device_type = "memory";
reg = <00000000 04000000>;
};
soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
- linux,phandle = <4000>;
#address-cells = <1>;
#size-cells = <1>;
- #interrupt-cells = <2>;
device_type = "soc";
compatible = "mpc10x";
store-gathering = <0>; /* 0 == off, !0 == on */
fef00000 fef00000 00100000>; /* pci iack */
i2c@80003000 {
- linux,phandle = <4300>;
- device_type = "i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
compatible = "fsl-i2c";
reg = <80003000 1000>;
interrupts = <5 2>;
- interrupt-parent = <4400>;
+ interrupt-parent = <&mpic>;
+
+ rtc@32 {
+ device_type = "rtc";
+ compatible = "ricoh,rs5c372a";
+ reg = <32>;
+ };
};
serial@80004500 {
- linux,phandle = <4511>;
device_type = "serial";
compatible = "ns16550";
reg = <80004500 8>;
clock-frequency = <5d08d88>;
current-speed = <2580>;
- interrupts = <9 2>;
- interrupt-parent = <4400>;
+ interrupts = <9 0>;
+ interrupt-parent = <&mpic>;
};
serial@80004600 {
- linux,phandle = <4512>;
device_type = "serial";
compatible = "ns16550";
reg = <80004600 8>;
clock-frequency = <5d08d88>;
current-speed = <e100>;
interrupts = <a 0>;
- interrupt-parent = <4400>;
+ interrupt-parent = <&mpic>;
};
- pic@80040000 {
- linux,phandle = <4400>;
+ mpic: interrupt-controller@80040000 {
#interrupt-cells = <2>;
#address-cells = <0>;
device_type = "open-pic";
compatible = "chrp,open-pic";
interrupt-controller;
reg = <80040000 40000>;
- built-in;
};
pci@fec00000 {
- linux,phandle = <4500>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
02000000 0 80000000 80000000 0 70000000>;
bus-range = <0 ff>;
clock-frequency = <7f28155>;
- interrupt-parent = <4400>;
+ interrupt-parent = <&mpic>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
- /* IDSEL 0x11 - IRQ0 ETH */
- 5800 0 0 1 4400 0 1
- 5800 0 0 2 4400 1 1
- 5800 0 0 3 4400 2 1
- 5800 0 0 4 4400 3 1
- /* IDSEL 0x12 - IRQ1 IDE0 */
- 6000 0 0 1 4400 1 1
- 6000 0 0 2 4400 2 1
- 6000 0 0 3 4400 3 1
- 6000 0 0 4 4400 0 1
- /* IDSEL 0x14 - IRQ3 USB2.0 */
- 7000 0 0 1 4400 3 1
- 7000 0 0 2 4400 3 1
- 7000 0 0 3 4400 3 1
- 7000 0 0 4 4400 3 1
+ /* IDSEL 11 - IRQ0 ETH */
+ 5800 0 0 1 &mpic 0 1
+ 5800 0 0 2 &mpic 1 1
+ 5800 0 0 3 &mpic 2 1
+ 5800 0 0 4 &mpic 3 1
+ /* IDSEL 12 - IRQ1 IDE0 */
+ 6000 0 0 1 &mpic 1 1
+ 6000 0 0 2 &mpic 2 1
+ 6000 0 0 3 &mpic 3 1
+ 6000 0 0 4 &mpic 0 1
+ /* IDSEL 14 - IRQ3 USB2.0 */
+ 7000 0 0 1 &mpic 3 1
+ 7000 0 0 2 &mpic 3 1
+ 7000 0 0 3 &mpic 3 1
+ 7000 0 0 4 &mpic 3 1
>;
};
};