static int __init add_legacy_port(struct device_node *np, int want_index,
int iotype, phys_addr_t base,
- phys_addr_t taddr, unsigned long irq)
+ phys_addr_t taddr, unsigned long irq,
+ upf_t flags)
{
u32 *clk, *spd, clock = BASE_BAUD * 16;
int index;
legacy_serial_ports[index].iotype = iotype;
legacy_serial_ports[index].uartclk = clock;
legacy_serial_ports[index].irq = irq;
- legacy_serial_ports[index].flags = ASYNC_BOOT_AUTOCONF;
+ legacy_serial_ports[index].flags = flags;
legacy_serial_infos[index].taddr = taddr;
legacy_serial_infos[index].np = of_node_get(np);
legacy_serial_infos[index].clock = clock;
return index;
}
+static int __init add_legacy_soc_port(struct device_node *np,
+ struct device_node *soc_dev)
+{
+ phys_addr_t addr;
+ u32 *addrp;
+ upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+
+ /* We only support ports that have a clock frequency properly
+ * encoded in the device-tree.
+ */
+ if (get_property(np, "clock-frequency", NULL) == NULL)
+ return -1;
+
+ /* Get the address */
+ addrp = of_get_address(soc_dev, 0, NULL, NULL);
+ if (addrp == NULL)
+ return -1;
+
+ addr = of_translate_address(soc_dev, addrp);
+
+ /* Add port, irq will be dealt with later. We passed a translated
+ * IO port value. It will be fixed up later along with the irq
+ */
+ return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags);
+}
+
static int __init add_legacy_isa_port(struct device_node *np,
- struct device_node *isa_bridge)
+ struct device_node *isa_brg)
{
u32 *reg;
char *typep;
taddr = of_translate_address(np, reg);
/* Add port, irq will be dealt with later */
- return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, NO_IRQ);
+ return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, NO_IRQ, UPF_BOOT_AUTOCONF);
}
+#ifdef CONFIG_PCI
static int __init add_legacy_pci_port(struct device_node *np,
struct device_node *pci_dev)
{
phys_addr_t addr, base;
u32 *addrp;
+ unsigned int flags;
int iotype, index = -1, lindex = 0;
/* We only support ports that have a clock frequency properly
return -1;
/* Get the PCI address. Assume BAR 0 */
- addrp = of_get_pci_address(pci_dev, 0, NULL);
+ addrp = of_get_pci_address(pci_dev, 0, NULL, &flags);
if (addrp == NULL)
return -1;
/* We only support BAR 0 for now */
- iotype = (addrp[0] & 0x02000000) ? UPIO_MEM : UPIO_PORT;
+ iotype = (flags & IORESOURCE_MEM) ? UPIO_MEM : UPIO_PORT;
addr = of_translate_address(pci_dev, addrp);
/* Set the IO base to the same as the translated address for MMIO,
/* Add port, irq will be dealt with later. We passed a translated
* IO port value. It will be fixed up later along with the irq
*/
- return add_legacy_port(np, index, iotype, base, addr, NO_IRQ);
+ return add_legacy_port(np, index, iotype, base, addr, NO_IRQ, UPF_BOOT_AUTOCONF);
+}
+#endif
+
+static void __init setup_legacy_serial_console(int console)
+{
+ struct legacy_serial_info *info =
+ &legacy_serial_infos[console];
+ void __iomem *addr;
+
+ if (info->taddr == 0)
+ return;
+ addr = ioremap(info->taddr, 0x1000);
+ if (addr == NULL)
+ return;
+ if (info->speed == 0)
+ info->speed = udbg_probe_uart_speed(addr, info->clock);
+ DBG("default console speed = %d\n", info->speed);
+ udbg_init_uart(addr, info->speed, info->clock);
}
/*
*/
void __init find_legacy_serial_ports(void)
{
- struct device_node *np, *stdout;
+ struct device_node *np, *stdout = NULL;
char *path;
int index;
/* Now find out if one of these is out firmware console */
path = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
- if (path == NULL) {
+ if (path != NULL) {
+ stdout = of_find_node_by_path(path);
+ if (stdout)
+ DBG("stdout is %s\n", stdout->full_name);
+ } else {
DBG(" no linux,stdout-path !\n");
- return;
}
- stdout = of_find_node_by_path(path);
- if (stdout) {
- DBG("stdout is %s\n", stdout->full_name);
+
+ /* First fill our array with SOC ports */
+ for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16550")) != NULL;) {
+ struct device_node *soc = of_get_parent(np);
+ if (soc && !strcmp(soc->type, "soc")) {
+ index = add_legacy_soc_port(np, np);
+ if (index >= 0 && np == stdout)
+ legacy_serial_console = index;
+ }
+ of_node_put(soc);
}
/* First fill our array with ISA ports */
of_node_put(isa);
}
+#ifdef CONFIG_PCI
/* Next, try to locate PCI ports */
for (np = NULL; (np = of_find_all_nodes(np));) {
struct device_node *pci, *parent = of_get_parent(np);
legacy_serial_console = index;
of_node_put(parent);
}
+#endif
DBG("legacy_serial_console = %d\n", legacy_serial_console);
-
- /* udbg is 64 bits only for now, that will change soon though ... */
- while (legacy_serial_console >= 0) {
- struct legacy_serial_info *info =
- &legacy_serial_infos[legacy_serial_console];
- void __iomem *addr;
-
- if (info->taddr == 0)
- break;
- addr = ioremap(info->taddr, 0x1000);
- if (addr == NULL)
- break;
- if (info->speed == 0)
- info->speed = udbg_probe_uart_speed(addr, info->clock);
- DBG("default console speed = %d\n", info->speed);
- udbg_init_uart(addr, info->speed, info->clock);
- break;
- }
-
+ if (legacy_serial_console >= 0)
+ setup_legacy_serial_console(legacy_serial_console);
DBG(" <- find_legacy_serial_port()\n");
}
struct device_node *np,
struct plat_serial8250_port *port)
{
+#ifdef CONFIG_PCI
struct pci_controller *hose;
DBG("fixup_port_pio(%d)\n", index);
index, port->iobase, port->iobase + offset);
port->iobase += offset;
}
+#endif
}
static void __init fixup_port_mmio(int index,
DBG(" of_chosen is NULL !\n");
return -ENODEV;
}
+
+ if (legacy_serial_console < 0) {
+ DBG(" legacy_serial_console not found !\n");
+ return -ENODEV;
+ }
/* We are getting a weird phandle from OF ... */
/* ... So use the full path instead */
name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
projects / linux-2.6-omap-h63xx.git / blobdiff