Merge commit 'v2.6.27-rc3' into x86/urgent

[linux-2.6-omap-h63xx.git] / arch / powerpc / platforms / 86xx / mpc8610_hpcd.c

diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 30725302884a53cc43e10fc8173057a6e6256839..5eedb710896e7568b8fc29cb1c78b1f7f5def81b 100644 (file)
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -58,93 +58,6 @@ static int __init mpc8610_declare_of_platform_devices(void)
 }
 machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
 
-#ifdef CONFIG_PCI
-static void __devinit quirk_uli1575(struct pci_dev *dev)
-{
-       u32 temp32;
-
-       /* Disable INTx */
-       pci_read_config_dword(dev, 0x48, &temp32);
-       pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
-
-       /* Enable sideband interrupt */
-       pci_read_config_dword(dev, 0x90, &temp32);
-       pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
-}
-
-static void __devinit quirk_uli5288(struct pci_dev *dev)
-{
-       unsigned char c;
-       unsigned short temp;
-
-       /* Interrupt Disable, Needed when SATA disabled */
-       pci_read_config_word(dev, PCI_COMMAND, &temp);
-       temp |= 1<<10;
-       pci_write_config_word(dev, PCI_COMMAND, temp);
-
-       pci_read_config_byte(dev, 0x83, &c);
-       c |= 0x80;
-       pci_write_config_byte(dev, 0x83, c);
-
-       pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
-       pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
-
-       pci_read_config_byte(dev, 0x83, &c);
-       c &= 0x7f;
-       pci_write_config_byte(dev, 0x83, c);
-}
-
-/*
- * Since 8259PIC was disabled on the board, the IDE device can not
- * use the legacy IRQ, we need to let the IDE device work under
- * native mode and use the interrupt line like other PCI devices.
- * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
- * as the interrupt for IDE device.
- */
-static void __devinit quirk_uli5229(struct pci_dev *dev)
-{
-       unsigned char c;
-
-       pci_read_config_byte(dev, 0x4b, &c);
-       c |= 0x10;
-       pci_write_config_byte(dev, 0x4b, c);
-}
-
-/*
- * SATA interrupt pin bug fix
- * There's a chip bug for 5288, The interrupt pin should be 2,
- * not the read only value 1, So it use INTB#, not INTA# which
- * actually used by the IDE device 5229.
- * As of this bug, during the PCI initialization, 5288 read the
- * irq of IDE device from the device tree, this function fix this
- * bug by re-assigning a correct irq to 5288.
- *
- */
-static void __devinit final_uli5288(struct pci_dev *dev)
-{
-       struct pci_controller *hose = pci_bus_to_host(dev->bus);
-       struct device_node *hosenode = hose ? hose->dn : NULL;
-       struct of_irq oirq;
-       int virq, pin = 2;
-       u32 laddr[3];
-
-       if (!hosenode)
-               return;
-
-       laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
-       laddr[1] = laddr[2] = 0;
-       of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
-       virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-                                    oirq.size);
-       dev->irq = virq;
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288);
-#endif /* CONFIG_PCI */
-
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
 static u32 get_busfreq(void)