#include <linux/module.h>
#include <linux/device.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
arch_initcall(of_add_fixed_phys);
#endif /* CONFIG_FIXED_PHY */
-static int gfar_mdio_of_init_one(struct device_node *np)
-{
- int k;
- struct device_node *child = NULL;
- struct gianfar_mdio_data mdio_data;
- struct platform_device *mdio_dev;
- struct resource res;
- int ret;
-
- memset(&res, 0, sizeof(res));
- memset(&mdio_data, 0, sizeof(mdio_data));
-
- ret = of_address_to_resource(np, 0, &res);
- if (ret)
- return ret;
-
- /* The gianfar device will try to use the same ID created below to find
- * this bus, to coordinate register access (since they share). */
- mdio_dev = platform_device_register_simple("fsl-gianfar_mdio",
- res.start&0xfffff, &res, 1);
- if (IS_ERR(mdio_dev))
- return PTR_ERR(mdio_dev);
-
- for (k = 0; k < 32; k++)
- mdio_data.irq[k] = PHY_POLL;
-
- while ((child = of_get_next_child(np, child)) != NULL) {
- int irq = irq_of_parse_and_map(child, 0);
- if (irq != NO_IRQ) {
- const u32 *id = of_get_property(child, "reg", NULL);
- mdio_data.irq[*id] = irq;
- }
- }
-
- ret = platform_device_add_data(mdio_dev, &mdio_data,
- sizeof(struct gianfar_mdio_data));
- if (ret)
- platform_device_unregister(mdio_dev);
-
- return ret;
-}
-
-static int __init gfar_mdio_of_init(void)
-{
- struct device_node *np = NULL;
-
- for_each_compatible_node(np, NULL, "fsl,gianfar-mdio")
- gfar_mdio_of_init_one(np);
-
- /* try the deprecated version */
- for_each_compatible_node(np, "mdio", "gianfar");
- gfar_mdio_of_init_one(np);
-
- return 0;
-}
-
-arch_initcall(gfar_mdio_of_init);
-
-static const char *gfar_tx_intr = "tx";
-static const char *gfar_rx_intr = "rx";
-static const char *gfar_err_intr = "error";
-
-static int __init gfar_of_init(void)
+#ifdef CONFIG_PPC_83xx
+static int __init mpc83xx_wdt_init(void)
{
+ struct resource r;
struct device_node *np;
- unsigned int i;
- struct platform_device *gfar_dev;
- struct resource res;
+ struct platform_device *dev;
+ u32 freq = fsl_get_sys_freq();
int ret;
- for (np = NULL, i = 0;
- (np = of_find_compatible_node(np, "network", "gianfar")) != NULL;
- i++) {
- struct resource r[4];
- struct device_node *phy, *mdio;
- struct gianfar_platform_data gfar_data;
- const unsigned int *id;
- const char *model;
- const char *ctype;
- const void *mac_addr;
- const phandle *ph;
- int n_res = 2;
-
- if (!of_device_is_available(np))
- continue;
-
- memset(r, 0, sizeof(r));
- memset(&gfar_data, 0, sizeof(gfar_data));
-
- ret = of_address_to_resource(np, 0, &r[0]);
- if (ret)
- goto err;
-
- of_irq_to_resource(np, 0, &r[1]);
-
- model = of_get_property(np, "model", NULL);
-
- /* If we aren't the FEC we have multiple interrupts */
- if (model && strcasecmp(model, "FEC")) {
- r[1].name = gfar_tx_intr;
-
- r[2].name = gfar_rx_intr;
- of_irq_to_resource(np, 1, &r[2]);
+ np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
- r[3].name = gfar_err_intr;
- of_irq_to_resource(np, 2, &r[3]);
-
- n_res += 2;
- }
-
- gfar_dev =
- platform_device_register_simple("fsl-gianfar", i, &r[0],
- n_res);
-
- if (IS_ERR(gfar_dev)) {
- ret = PTR_ERR(gfar_dev);
- goto err;
- }
-
- mac_addr = of_get_mac_address(np);
- if (mac_addr)
- memcpy(gfar_data.mac_addr, mac_addr, 6);
-
- if (model && !strcasecmp(model, "TSEC"))
- gfar_data.device_flags =
- FSL_GIANFAR_DEV_HAS_GIGABIT |
- FSL_GIANFAR_DEV_HAS_COALESCE |
- FSL_GIANFAR_DEV_HAS_RMON |
- FSL_GIANFAR_DEV_HAS_MULTI_INTR;
- if (model && !strcasecmp(model, "eTSEC"))
- gfar_data.device_flags =
- FSL_GIANFAR_DEV_HAS_GIGABIT |
- FSL_GIANFAR_DEV_HAS_COALESCE |
- FSL_GIANFAR_DEV_HAS_RMON |
- FSL_GIANFAR_DEV_HAS_MULTI_INTR |
- FSL_GIANFAR_DEV_HAS_CSUM |
- FSL_GIANFAR_DEV_HAS_VLAN |
- FSL_GIANFAR_DEV_HAS_EXTENDED_HASH;
-
- ctype = of_get_property(np, "phy-connection-type", NULL);
-
- /* We only care about rgmii-id. The rest are autodetected */
- if (ctype && !strcmp(ctype, "rgmii-id"))
- gfar_data.interface = PHY_INTERFACE_MODE_RGMII_ID;
- else
- gfar_data.interface = PHY_INTERFACE_MODE_MII;
-
- if (of_get_property(np, "fsl,magic-packet", NULL))
- gfar_data.device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
-
- ph = of_get_property(np, "phy-handle", NULL);
- if (ph == NULL) {
- u32 *fixed_link;
-
- fixed_link = (u32 *)of_get_property(np, "fixed-link",
- NULL);
- if (!fixed_link) {
- ret = -ENODEV;
- goto unreg;
- }
-
- snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "0");
- gfar_data.phy_id = fixed_link[0];
- } else {
- phy = of_find_node_by_phandle(*ph);
-
- if (phy == NULL) {
- ret = -ENODEV;
- goto unreg;
- }
-
- mdio = of_get_parent(phy);
-
- id = of_get_property(phy, "reg", NULL);
- ret = of_address_to_resource(mdio, 0, &res);
- if (ret) {
- of_node_put(phy);
- of_node_put(mdio);
- goto unreg;
- }
+ if (!np) {
+ ret = -ENODEV;
+ goto nodev;
+ }
- gfar_data.phy_id = *id;
- snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx",
- (unsigned long long)res.start&0xfffff);
+ memset(&r, 0, sizeof(r));
- of_node_put(phy);
- of_node_put(mdio);
- }
-
- /* Get MDIO bus controlled by this eTSEC, if any. Normally only
- * eTSEC 1 will control an MDIO bus, not necessarily the same
- * bus that its PHY is on ('mdio' above), so we can't just use
- * that. What we do is look for a gianfar mdio device that has
- * overlapping registers with this device. That's really the
- * whole point, to find the device sharing our registers to
- * coordinate access with it.
- */
- for_each_compatible_node(mdio, NULL, "fsl,gianfar-mdio") {
- if (of_address_to_resource(mdio, 0, &res))
- continue;
-
- if (res.start >= r[0].start && res.end <= r[0].end) {
- /* Get the ID the mdio bus platform device was
- * registered with. gfar_data.bus_id is
- * different because it's for finding a PHY,
- * while this is for finding a MII bus.
- */
- gfar_data.mdio_bus = res.start&0xfffff;
- of_node_put(mdio);
- break;
- }
- }
+ ret = of_address_to_resource(np, 0, &r);
+ if (ret)
+ goto err;
- ret =
- platform_device_add_data(gfar_dev, &gfar_data,
- sizeof(struct
- gianfar_platform_data));
- if (ret)
- goto unreg;
+ dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1);
+ if (IS_ERR(dev)) {
+ ret = PTR_ERR(dev);
+ goto err;
}
+ ret = platform_device_add_data(dev, &freq, sizeof(freq));
+ if (ret)
+ goto unreg;
+
+ of_node_put(np);
return 0;
unreg:
- platform_device_unregister(gfar_dev);
+ platform_device_unregister(dev);
err:
+ of_node_put(np);
+nodev:
return ret;
}
-arch_initcall(gfar_of_init);
+arch_initcall(mpc83xx_wdt_init);
+#endif
static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
{
struct fsl_usb2_platform_data usb_data;
const unsigned char *prop = NULL;
+ if (!of_device_is_available(np))
+ continue;
+
memset(&r, 0, sizeof(r));
memset(&usb_data, 0, sizeof(usb_data));
static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
struct spi_board_info *board_infos,
unsigned int num_board_infos,
- void (*activate_cs)(u8 cs, u8 polarity),
- void (*deactivate_cs)(u8 cs, u8 polarity))
+ void (*cs_control)(struct spi_device *dev,
+ bool on))
{
struct device_node *np;
unsigned int i = 0;
struct resource res[2];
struct platform_device *pdev;
struct fsl_spi_platform_data pdata = {
- .activate_cs = activate_cs,
- .deactivate_cs = deactivate_cs,
+ .cs_control = cs_control,
};
memset(res, 0, sizeof(res));
int __init fsl_spi_init(struct spi_board_info *board_infos,
unsigned int num_board_infos,
- void (*activate_cs)(u8 cs, u8 polarity),
- void (*deactivate_cs)(u8 cs, u8 polarity))
+ void (*cs_control)(struct spi_device *spi, bool on))
{
u32 sysclk = -1;
int ret;
}
ret = of_fsl_spi_probe(NULL, "fsl,spi", sysclk, board_infos,
- num_board_infos, activate_cs, deactivate_cs);
+ num_board_infos, cs_control);
if (!ret)
of_fsl_spi_probe("spi", "fsl_spi", sysclk, board_infos,
- num_board_infos, activate_cs, deactivate_cs);
+ num_board_infos, cs_control);
return spi_register_board_info(board_infos, num_board_infos);
}
projects / linux-2.6-omap-h63xx.git / blobdiff