#include <asm/irq.h>
#include <asm/page.h>
#include <asm/ptrace.h>
+#include <asm/sections.h>
/*
* Machine setup..
unsigned long __initdata zholes_size[MAX_NR_ZONES];
static unsigned long __initdata memory_end;
-/*
- * Setup options
- */
-extern int _text,_etext, _edata, _end;
-
/*
* This is set up by the setup-routine at boot-time
* for S390 need to find out, what we have to setup
#include <asm/setup.h>
-static char command_line[COMMAND_LINE_SIZE] = { 0, };
-
static struct resource code_resource = {
.name = "Kernel code",
- .start = (unsigned long) &_text,
- .end = (unsigned long) &_etext - 1,
.flags = IORESOURCE_BUSY | IORESOURCE_MEM,
};
static struct resource data_resource = {
.name = "Kernel data",
- .start = (unsigned long) &_etext,
- .end = (unsigned long) &_edata - 1,
.flags = IORESOURCE_BUSY | IORESOURCE_MEM,
};
reipl_diag();
if (MACHINE_IS_VM)
- cpcmd ("IPL", NULL, 0);
+ cpcmd ("IPL", NULL, 0, NULL);
else
reipl (0x10000 | S390_lowcore.ipl_device);
}
static void do_machine_halt_nonsmp(void)
{
if (MACHINE_IS_VM && strlen(vmhalt_cmd) > 0)
- cpcmd(vmhalt_cmd, NULL, 0);
+ cpcmd(vmhalt_cmd, NULL, 0, NULL);
signal_processor(smp_processor_id(), sigp_stop_and_store_status);
}
static void do_machine_power_off_nonsmp(void)
{
if (MACHINE_IS_VM && strlen(vmpoff_cmd) > 0)
- cpcmd(vmpoff_cmd, NULL, 0);
+ cpcmd(vmpoff_cmd, NULL, 0, NULL);
signal_processor(smp_processor_id(), sigp_stop_and_store_status);
}
_machine_power_off();
}
+/*
+ * Dummy power off function.
+ */
+void (*pm_power_off)(void) = machine_power_off;
+
static void __init
add_memory_hole(unsigned long start, unsigned long end)
{
}
}
-static void __init
-parse_cmdline_early(char **cmdline_p)
+static int __init early_parse_mem(char *p)
+{
+ memory_end = memparse(p, &p);
+ return 0;
+}
+early_param("mem", early_parse_mem);
+
+/*
+ * "ipldelay=XXX[sm]" sets ipl delay in seconds or minutes
+ */
+static int __init early_parse_ipldelay(char *p)
{
- char c = ' ', cn, *to = command_line, *from = COMMAND_LINE;
unsigned long delay = 0;
- /* Save unparsed command line copy for /proc/cmdline */
- memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
- saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+ delay = simple_strtoul(p, &p, 0);
- for (;;) {
- /*
- * "mem=XXX[kKmM]" sets memsize
- */
- if (c == ' ' && strncmp(from, "mem=", 4) == 0) {
- memory_end = simple_strtoul(from+4, &from, 0);
- if ( *from == 'K' || *from == 'k' ) {
- memory_end = memory_end << 10;
- from++;
- } else if ( *from == 'M' || *from == 'm' ) {
- memory_end = memory_end << 20;
- from++;
- }
- }
- /*
- * "ipldelay=XXX[sm]" sets ipl delay in seconds or minutes
- */
- if (c == ' ' && strncmp(from, "ipldelay=", 9) == 0) {
- delay = simple_strtoul(from+9, &from, 0);
- if (*from == 's' || *from == 'S') {
- delay = delay*1000000;
- from++;
- } else if (*from == 'm' || *from == 'M') {
- delay = delay*60*1000000;
- from++;
- }
- /* now wait for the requested amount of time */
- udelay(delay);
- }
- cn = *(from++);
- if (!cn)
- break;
- if (cn == '\n')
- cn = ' '; /* replace newlines with space */
- if (cn == 0x0d)
- cn = ' '; /* replace 0x0d with space */
- if (cn == ' ' && c == ' ')
- continue; /* remove additional spaces */
- c = cn;
- if (to - command_line >= COMMAND_LINE_SIZE)
- break;
- *(to++) = c;
+ switch (*p) {
+ case 's':
+ case 'S':
+ delay *= 1000000;
+ break;
+ case 'm':
+ case 'M':
+ delay *= 60 * 1000000;
}
- if (c == ' ' && to > command_line) to--;
- *to = '\0';
- *cmdline_p = command_line;
+
+ /* now wait for the requested amount of time */
+ udelay(delay);
+
+ return 0;
}
+early_param("ipldelay", early_parse_ipldelay);
static void __init
setup_lowcore(void)
__alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE;
lc->current_task = (unsigned long) init_thread_union.thread_info.task;
lc->thread_info = (unsigned long) &init_thread_union;
-#ifndef CONFIG_ARCH_S390X
+#ifndef CONFIG_64BIT
if (MACHINE_HAS_IEEE) {
lc->extended_save_area_addr = (__u32)
__alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0);
struct resource *res;
int i;
+ code_resource.start = (unsigned long) &_text;
+ code_resource.end = (unsigned long) &_etext - 1;
+ data_resource.start = (unsigned long) &_etext;
+ data_resource.end = (unsigned long) &_edata - 1;
+
for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
res = alloc_bootmem_low(sizeof(struct resource));
res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
/*
* print what head.S has found out about the machine
*/
-#ifndef CONFIG_ARCH_S390X
+#ifndef CONFIG_64BIT
printk((MACHINE_IS_VM) ?
"We are running under VM (31 bit mode)\n" :
"We are running native (31 bit mode)\n");
printk((MACHINE_HAS_IEEE) ?
"This machine has an IEEE fpu\n" :
"This machine has no IEEE fpu\n");
-#else /* CONFIG_ARCH_S390X */
+#else /* CONFIG_64BIT */
printk((MACHINE_IS_VM) ?
"We are running under VM (64 bit mode)\n" :
"We are running native (64 bit mode)\n");
-#endif /* CONFIG_ARCH_S390X */
+#endif /* CONFIG_64BIT */
+
+ /* Save unparsed command line copy for /proc/cmdline */
+ strlcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
+
+ *cmdline_p = COMMAND_LINE;
+ *(*cmdline_p + COMMAND_LINE_SIZE - 1) = '\0';
ROOT_DEV = Root_RAM0;
-#ifndef CONFIG_ARCH_S390X
- memory_end = memory_size & ~0x400000UL; /* align memory end to 4MB */
+
+ init_mm.start_code = PAGE_OFFSET;
+ init_mm.end_code = (unsigned long) &_etext;
+ init_mm.end_data = (unsigned long) &_edata;
+ init_mm.brk = (unsigned long) &_end;
+
+ memory_end = memory_size;
+
+ parse_early_param();
+
+#ifndef CONFIG_64BIT
+ memory_end &= ~0x400000UL;
+
/*
* We need some free virtual space to be able to do vmalloc.
* On a machine with 2GB memory we make sure that we have at
*/
if (memory_end > 1920*1024*1024)
memory_end = 1920*1024*1024;
-#else /* CONFIG_ARCH_S390X */
- memory_end = memory_size & ~0x200000UL; /* detected in head.s */
-#endif /* CONFIG_ARCH_S390X */
-
- init_mm.start_code = PAGE_OFFSET;
- init_mm.end_code = (unsigned long) &_etext;
- init_mm.end_data = (unsigned long) &_edata;
- init_mm.brk = (unsigned long) &_end;
-
- parse_cmdline_early(cmdline_p);
+#else /* CONFIG_64BIT */
+ memory_end &= ~0x200000UL;
+#endif /* CONFIG_64BIT */
setup_memory();
setup_resources();
cpu_init();
__cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr;
+ smp_setup_cpu_possible_map();
/*
* Create kernel page tables and switch to virtual addressing.
projects / linux-2.6-omap-h63xx.git / blobdiff