Merge branch 'sched/latest' of git://git.kernel.org/pub/scm/linux/kernel/git/ghaskins...

[linux-2.6-omap-h63xx.git] / arch / sh / Kconfig

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5c9cbfc14c4d5ad9ad06bf18f3a4b2f523eebd0b..f32a5197128dcdce45374563cba26c67fed2f78e 100644 (file)
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -13,6 +13,7 @@ config SUPERH
        select HAVE_OPROFILE
        select HAVE_GENERIC_DMA_COHERENT
        select HAVE_IOREMAP_PROT if MMU
+       select HAVE_ARCH_TRACEHOOK
        help
          The SuperH is a RISC processor targeted for use in embedded systems
          and consumer electronics; it was also used in the Sega Dreamcast
@@ -23,8 +24,10 @@ config SUPERH32
        def_bool !SUPERH64
        select HAVE_KPROBES
        select HAVE_KRETPROBES
-       select HAVE_ARCH_TRACEHOOK
        select HAVE_FUNCTION_TRACER
+       select HAVE_FTRACE_MCOUNT_RECORD
+       select HAVE_DYNAMIC_FTRACE
+       select HAVE_ARCH_KGDB
 
 config SUPERH64
        def_bool y if CPU_SH5
@@ -55,8 +58,6 @@ config GENERIC_HARDIRQS
 
 config GENERIC_HARDIRQS_NO__DO_IRQ
        def_bool y
-       depends on SUPERH32 && (!SH_DREAMCAST && !SH_SH4202_MICRODEV && \
-                               !SH_7751_SYSTEMH && !HD64461)
 
 config GENERIC_IRQ_PROBE
        def_bool y
@@ -85,10 +86,17 @@ config GENERIC_LOCKBREAK
 
 config SYS_SUPPORTS_PM
        bool
+       depends on !SMP
+
+config ARCH_SUSPEND_POSSIBLE
+       def_bool n
+
+config ARCH_HIBERNATION_POSSIBLE
+       def_bool n
 
 config SYS_SUPPORTS_APM_EMULATION
        bool
-       select SYS_SUPPORTS_PM
+       select ARCH_SUSPEND_POSSIBLE
 
 config SYS_SUPPORTS_SMP
        bool
@@ -183,6 +191,11 @@ config CPU_SUBTYPE_SH7619
 
 # SH-2A Processor Support
 
+config CPU_SUBTYPE_SH7201
+       bool "Support SH7201 processor"
+       select CPU_SH2A
+       select CPU_HAS_FPU
+ 
 config CPU_SUBTYPE_SH7203
        bool "Support SH7203 processor"
        select CPU_SH2A
@@ -456,8 +469,12 @@ config SH_CPU_FREQ
        depends on CPU_FREQ
        select CPU_FREQ_TABLE
        help
-         This adds the cpufreq driver for SuperH. At present, only
-         the SH-4 is supported.
+         This adds the cpufreq driver for SuperH. Any CPU that supports
+         clock rate rounding through the clock framework can use this
+         driver. While it will make the kernel slightly larger, this is
+         harmless for CPUs that don't support rate rounding. The driver
+         will also generate a notice in the boot log before disabling
+         itself if the CPU in question is not capable of rate rounding.
 
          For details, take a look at <file:Documentation/cpu-freq>.
 
@@ -469,9 +486,6 @@ source "arch/sh/drivers/Kconfig"
 
 endmenu
 
-config ISA_DMA_API
-       bool
-
 menu "Kernel features"
 
 source kernel/Kconfig.hz
@@ -688,49 +702,6 @@ config MAPLE
          Dreamcast with a serial line terminal or a remote network
          connection.
 
-config CF_ENABLER
-       bool "Compact Flash Enabler support"
-       depends on SOLUTION_ENGINE || SH_SH03
-       ---help---
-         Compact Flash is a small, removable mass storage device introduced
-         in 1994 originally as a PCMCIA device.  If you say `Y' here, you
-         compile in support for Compact Flash devices directly connected to
-         a SuperH processor.  A Compact Flash FAQ is available at
-         <http://www.compactflash.org/faqs/faq.htm>.
-
-         If your board has "Directly Connected" CompactFlash at area 5 or 6,
-         you may want to enable this option.  Then, you can use CF as
-         primary IDE drive (only tested for SanDisk).
-
-         If in doubt, select 'N'.
-
-choice
-       prompt "Compact Flash Connection Area"
-       depends on CF_ENABLER
-       default CF_AREA6
-
-config CF_AREA5
-       bool "Area5"
-       help
-         If your board has "Directly Connected" CompactFlash, You should
-         select the area where your CF is connected to.
-
-         - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
-         - "Area6" if it is connected to Area 6 (0x18000000)
-
-         "Area6" will work for most boards.
-
-config CF_AREA6
-       bool "Area6"
-
-endchoice
-
-config CF_BASE_ADDR
-       hex
-       depends on CF_ENABLER
-       default "0xb8000000" if CF_AREA6
-       default "0xb4000000" if CF_AREA5
-
 source "arch/sh/drivers/pci/Kconfig"
 
 source "drivers/pci/Kconfig"
@@ -748,13 +719,11 @@ source "fs/Kconfig.binfmt"
 endmenu
 
 menu "Power management options (EXPERIMENTAL)"
-depends on EXPERIMENTAL && SYS_SUPPORTS_PM
+depends on EXPERIMENTAL
 
-config ARCH_SUSPEND_POSSIBLE
-       def_bool y
-       depends on !SMP
+source "kernel/power/Kconfig"
 
-source kernel/power/Kconfig
+source "drivers/cpuidle/Kconfig"
 
 endmenu