#include <linux/serial_core.h>
#include "../../../drivers/serial/sh-sci.h"
-#if defined(CONFIG_CPU_SUBTYPE_SH7720)
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7721)
#define EPK_SCSMR_VALUE 0x000
#define EPK_SCBRR_VALUE 0x00C
#define EPK_FIFO_SIZE 64
};
#if !defined(CONFIG_SH_STANDARD_BIOS)
-#if defined(CONFIG_CPU_SUBTYPE_SH7720)
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7721)
static void scif_sercon_init(char *s)
{
sci_out(&scif_port, SCSCR, 0x0000); /* clear TE and RE */
*/
static void scif_sercon_init(char *s)
{
+ struct uart_port *port = &scif_port;
unsigned baud = DEFAULT_BAUD;
+ unsigned int status;
char *e;
if (*s == ',')
baud = DEFAULT_BAUD;
}
- ctrl_outw(0, scif_port.mapbase + 8);
- ctrl_outw(0, scif_port.mapbase);
+ do {
+ status = sci_in(port, SCxSR);
+ } while (!(status & SCxSR_TEND(port)));
+
+ sci_out(port, SCSCR, 0); /* TE=0, RE=0 */
+ sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+ sci_out(port, SCSMR, 0);
/* Set baud rate */
- ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) /
- (32 * baud) - 1, scif_port.mapbase + 4);
-
- ctrl_outw(12, scif_port.mapbase + 24);
- ctrl_outw(8, scif_port.mapbase + 24);
- ctrl_outw(0, scif_port.mapbase + 32);
- ctrl_outw(0x60, scif_port.mapbase + 16);
- ctrl_outw(0, scif_port.mapbase + 36);
- ctrl_outw(0x30, scif_port.mapbase + 8);
+ sci_out(port, SCBRR, (CONFIG_SH_PCLK_FREQ + 16 * baud) /
+ (32 * baud) - 1);
+ udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
+
+ sci_out(port, SCSPTR, 0);
+ sci_out(port, SCxSR, 0x60);
+ sci_out(port, SCLSR, 0);
+
+ sci_out(port, SCFCR, 0);
+ sci_out(port, SCSCR, 0x30); /* TE=1, RE=1 */
}
#endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */
#endif /* !defined(CONFIG_SH_STANDARD_BIOS) */
if (!strncmp(buf, "serial", 6)) {
early_console = &scif_console;
-#if (defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SUBTYPE_SH7720)) && \
- !defined(CONFIG_SH_STANDARD_BIOS)
+#if !defined(CONFIG_SH_STANDARD_BIOS)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7721)
scif_sercon_init(buf + 6);
+#endif
#endif
}
#endif