.text
.align 32
- .globl sparc64_vpte_patchme1
- .globl sparc64_vpte_patchme2
-/*
- * On a second level vpte miss, check whether the original fault is to the OBP
- * range (note that this is only possible for instruction miss, data misses to
- * obp range do not use vpte). If so, go back directly to the faulting address.
- * This is because we want to read the tpc, otherwise we have no way of knowing
- * the 8k aligned faulting address if we are using >8k kernel pagesize. This
- * also ensures no vpte range addresses are dropped into tlb while obp is
- * executing (see inherit_locked_prom_mappings() rant).
- */
-sparc64_vpte_nucleus:
- /* Load 0xf0000000, which is LOW_OBP_ADDRESS. */
- mov 0xf, %g5
- sllx %g5, 28, %g5
-
- /* Is addr >= LOW_OBP_ADDRESS? */
- cmp %g4, %g5
- blu,pn %xcc, sparc64_vpte_patchme1
- mov 0x1, %g5
-
- /* Load 0x100000000, which is HI_OBP_ADDRESS. */
- sllx %g5, 32, %g5
-
- /* Is addr < HI_OBP_ADDRESS? */
- cmp %g4, %g5
- blu,pn %xcc, obp_iaddr_patch
- nop
-
- /* These two instructions are patched by paginig_init(). */
-sparc64_vpte_patchme1:
- sethi %hi(0), %g5
-sparc64_vpte_patchme2:
- or %g5, %lo(0), %g5
-
- /* With kernel PGD in %g5, branch back into dtlb_backend. */
- ba,pt %xcc, sparc64_kpte_continue
- andn %g1, 0x3, %g1 /* Finish PMD offset adjustment. */
-
-vpte_noent:
- /* Restore previous TAG_ACCESS, %g5 is zero, and we will
- * skip over the trap instruction so that the top level
- * TLB miss handler will thing this %g5 value is just an
- * invalid PTE, thus branching to full fault processing.
- */
- mov TLB_SFSR, %g1
- stxa %g4, [%g1 + %g1] ASI_DMMU
- done
-
- .globl obp_iaddr_patch
-obp_iaddr_patch:
- /* These two instructions patched by inherit_prom_mappings(). */
- sethi %hi(0), %g5
- or %g5, %lo(0), %g5
-
- /* Behave as if we are at TL0. */
- wrpr %g0, 1, %tl
- rdpr %tpc, %g4 /* Find original faulting iaddr */
- srlx %g4, 13, %g4 /* Throw out context bits */
- sllx %g4, 13, %g4 /* g4 has vpn + ctx0 now */
-
- /* Restore previous TAG_ACCESS. */
- mov TLB_SFSR, %g1
- stxa %g4, [%g1 + %g1] ASI_IMMU
-
- /* Get PMD offset. */
- srlx %g4, 23, %g6
- and %g6, 0x7ff, %g6
- sllx %g6, 2, %g6
-
- /* Load PMD, is it valid? */
- lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
- brz,pn %g5, longpath
- sllx %g5, 11, %g5
-
- /* Get PTE offset. */
- srlx %g4, 13, %g6
- and %g6, 0x3ff, %g6
- sllx %g6, 3, %g6
-
- /* Load PTE. */
- ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
- brgez,pn %g5, longpath
- nop
-
- /* TLB load and return from trap. */
- stxa %g5, [%g0] ASI_ITLB_DATA_IN
- retry
-
- .globl obp_daddr_patch
-obp_daddr_patch:
- /* These two instructions patched by inherit_prom_mappings(). */
- sethi %hi(0), %g5
- or %g5, %lo(0), %g5
-
- /* Get PMD offset. */
- srlx %g4, 23, %g6
- and %g6, 0x7ff, %g6
- sllx %g6, 2, %g6
-
- /* Load PMD, is it valid? */
- lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
- brz,pn %g5, longpath
- sllx %g5, 11, %g5
-
- /* Get PTE offset. */
- srlx %g4, 13, %g6
- and %g6, 0x3ff, %g6
- sllx %g6, 3, %g6
-
- /* Load PTE. */
- ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
- brgez,pn %g5, longpath
- nop
-
- /* TLB load and return from trap. */
- stxa %g5, [%g0] ASI_DTLB_DATA_IN
- retry
-
-/*
- * On a first level data miss, check whether this is to the OBP range (note
- * that such accesses can be made by prom, as well as by kernel using
- * prom_getproperty on "address"), and if so, do not use vpte access ...
- * rather, use information saved during inherit_prom_mappings() using 8k
- * pagesize.
- */
-kvmap:
- /* Load 0xf0000000, which is LOW_OBP_ADDRESS. */
- mov 0xf, %g5
- sllx %g5, 28, %g5
-
- /* Is addr >= LOW_OBP_ADDRESS? */
- cmp %g4, %g5
- blu,pn %xcc, vmalloc_addr
- mov 0x1, %g5
-
- /* Load 0x100000000, which is HI_OBP_ADDRESS. */
- sllx %g5, 32, %g5
-
- /* Is addr < HI_OBP_ADDRESS? */
- cmp %g4, %g5
- blu,pn %xcc, obp_daddr_patch
- nop
-
-vmalloc_addr:
- /* If we get here, a vmalloc addr accessed, load kernel VPTE. */
- ldxa [%g3 + %g6] ASI_N, %g5
- brgez,pn %g5, longpath
- nop
-
- /* PTE is valid, load into TLB and return from trap. */
- stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB
- retry
-
/* This is trivial with the new code... */
.globl do_fpdis
do_fpdis:
*
* DATA 0: [low 32-bits] Address of function to call, jmp to this
* [high 32-bits] MMU Context Argument 0, place in %g5
- * DATA 1: Address Argument 1, place in %g6
+ * DATA 1: Address Argument 1, place in %g1
* DATA 2: Address Argument 2, place in %g7
*
* With this method we can do most of the cross-call tlb/cache
* flushing very quickly.
*
- * Current CPU's IRQ worklist table is locked into %g1,
- * don't touch.
+ * Current CPU's IRQ worklist table is locked into %g6, don't touch.
*/
.text
.align 32
nop
do_cheetah_plus_data_parity:
- ba,pt %xcc, etrap
+ rdpr %pil, %g2
+ wrpr %g0, 15, %pil
+ ba,pt %xcc, etrap_irq
rd %pc, %g7
mov 0x0, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
- ba,pt %xcc, rtrap
- clr %l6
+ ba,a,pt %xcc, rtrap_irq
cheetah_plus_dcpe_trap_vector_tl1:
membar #Sync
nop
do_cheetah_plus_insn_parity:
- ba,pt %xcc, etrap
+ rdpr %pil, %g2
+ wrpr %g0, 15, %pil
+ ba,pt %xcc, etrap_irq
rd %pc, %g7
mov 0x1, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
- ba,pt %xcc, rtrap
- clr %l6
+ ba,a,pt %xcc, rtrap_irq
cheetah_plus_icpe_trap_vector_tl1:
membar #Sync
nop
wrpr %g1, %tl ! Restore original trap level
do_dcpe_tl1_nonfatal: /* Ok we may use interrupt globals safely. */
+ sethi %hi(dcache_parity_tl1_occurred), %g2
+ lduw [%g2 + %lo(dcache_parity_tl1_occurred)], %g1
+ add %g1, 1, %g1
+ stw %g1, [%g2 + %lo(dcache_parity_tl1_occurred)]
/* Reset D-cache parity */
sethi %hi(1 << 16), %g1 ! D-cache size
mov (1 << 5), %g2 ! D-cache line size
nop
wrpr %g1, %tl ! Restore original trap level
do_icpe_tl1_nonfatal: /* Ok we may use interrupt globals safely. */
+ sethi %hi(icache_parity_tl1_occurred), %g2
+ lduw [%g2 + %lo(icache_parity_tl1_occurred)], %g1
+ add %g1, 1, %g1
+ stw %g1, [%g2 + %lo(icache_parity_tl1_occurred)]
/* Flush I-cache */
sethi %hi(1 << 15), %g1 ! I-cache size
mov (1 << 5), %g2 ! I-cache line size
projects / linux-2.6-omap-h63xx.git / blobdiff