.text
.align 32
- .globl sparc64_vpte_patchme1
- .globl sparc64_vpte_patchme2
-/*
- * On a second level vpte miss, check whether the original fault is to the OBP
- * range (note that this is only possible for instruction miss, data misses to
- * obp range do not use vpte). If so, go back directly to the faulting address.
- * This is because we want to read the tpc, otherwise we have no way of knowing
- * the 8k aligned faulting address if we are using >8k kernel pagesize. This
- * also ensures no vpte range addresses are dropped into tlb while obp is
- * executing (see inherit_locked_prom_mappings() rant).
- */
-sparc64_vpte_nucleus:
- /* Load 0xf0000000, which is LOW_OBP_ADDRESS. */
- mov 0xf, %g5
- sllx %g5, 28, %g5
-
- /* Is addr >= LOW_OBP_ADDRESS? */
- cmp %g4, %g5
- blu,pn %xcc, sparc64_vpte_patchme1
- mov 0x1, %g5
-
- /* Load 0x100000000, which is HI_OBP_ADDRESS. */
- sllx %g5, 32, %g5
-
- /* Is addr < HI_OBP_ADDRESS? */
- cmp %g4, %g5
- blu,pn %xcc, obp_iaddr_patch
- nop
-
- /* These two instructions are patched by paginig_init(). */
-sparc64_vpte_patchme1:
- sethi %hi(0), %g5
-sparc64_vpte_patchme2:
- or %g5, %lo(0), %g5
-
- /* With kernel PGD in %g5, branch back into dtlb_backend. */
- ba,pt %xcc, sparc64_kpte_continue
- andn %g1, 0x3, %g1 /* Finish PMD offset adjustment. */
-
-vpte_noent:
- /* Restore previous TAG_ACCESS, %g5 is zero, and we will
- * skip over the trap instruction so that the top level
- * TLB miss handler will thing this %g5 value is just an
- * invalid PTE, thus branching to full fault processing.
- */
- mov TLB_SFSR, %g1
- stxa %g4, [%g1 + %g1] ASI_DMMU
- done
-
- .globl obp_iaddr_patch
-obp_iaddr_patch:
- /* These two instructions patched by inherit_prom_mappings(). */
- sethi %hi(0), %g5
- or %g5, %lo(0), %g5
-
- /* Behave as if we are at TL0. */
- wrpr %g0, 1, %tl
- rdpr %tpc, %g4 /* Find original faulting iaddr */
- srlx %g4, 13, %g4 /* Throw out context bits */
- sllx %g4, 13, %g4 /* g4 has vpn + ctx0 now */
-
- /* Restore previous TAG_ACCESS. */
- mov TLB_SFSR, %g1
- stxa %g4, [%g1 + %g1] ASI_IMMU
-
- /* Get PMD offset. */
- srlx %g4, 23, %g6
- and %g6, 0x7ff, %g6
- sllx %g6, 2, %g6
-
- /* Load PMD, is it valid? */
- lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
- brz,pn %g5, longpath
- sllx %g5, 11, %g5
-
- /* Get PTE offset. */
- srlx %g4, 13, %g6
- and %g6, 0x3ff, %g6
- sllx %g6, 3, %g6
-
- /* Load PTE. */
- ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
- brgez,pn %g5, longpath
- nop
-
- /* TLB load and return from trap. */
- stxa %g5, [%g0] ASI_ITLB_DATA_IN
- retry
-
- .globl obp_daddr_patch
-obp_daddr_patch:
- /* These two instructions patched by inherit_prom_mappings(). */
- sethi %hi(0), %g5
- or %g5, %lo(0), %g5
-
- /* Get PMD offset. */
- srlx %g4, 23, %g6
- and %g6, 0x7ff, %g6
- sllx %g6, 2, %g6
-
- /* Load PMD, is it valid? */
- lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
- brz,pn %g5, longpath
- sllx %g5, 11, %g5
-
- /* Get PTE offset. */
- srlx %g4, 13, %g6
- and %g6, 0x3ff, %g6
- sllx %g6, 3, %g6
-
- /* Load PTE. */
- ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
- brgez,pn %g5, longpath
- nop
-
- /* TLB load and return from trap. */
- stxa %g5, [%g0] ASI_DTLB_DATA_IN
- retry
-
-/*
- * On a first level data miss, check whether this is to the OBP range (note
- * that such accesses can be made by prom, as well as by kernel using
- * prom_getproperty on "address"), and if so, do not use vpte access ...
- * rather, use information saved during inherit_prom_mappings() using 8k
- * pagesize.
- */
-kvmap:
- /* Load 0xf0000000, which is LOW_OBP_ADDRESS. */
- mov 0xf, %g5
- sllx %g5, 28, %g5
-
- /* Is addr >= LOW_OBP_ADDRESS? */
- cmp %g4, %g5
- blu,pn %xcc, vmalloc_addr
- mov 0x1, %g5
-
- /* Load 0x100000000, which is HI_OBP_ADDRESS. */
- sllx %g5, 32, %g5
-
- /* Is addr < HI_OBP_ADDRESS? */
- cmp %g4, %g5
- blu,pn %xcc, obp_daddr_patch
- nop
-
-vmalloc_addr:
- /* If we get here, a vmalloc addr accessed, load kernel VPTE. */
- ldxa [%g3 + %g6] ASI_N, %g5
- brgez,pn %g5, longpath
- nop
-
- /* PTE is valid, load into TLB and return from trap. */
- stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB
- retry
-
/* This is trivial with the new code... */
.globl do_fpdis
do_fpdis:
*
* DATA 0: [low 32-bits] Address of function to call, jmp to this
* [high 32-bits] MMU Context Argument 0, place in %g5
- * DATA 1: Address Argument 1, place in %g6
+ * DATA 1: Address Argument 1, place in %g1
* DATA 2: Address Argument 2, place in %g7
*
* With this method we can do most of the cross-call tlb/cache
* flushing very quickly.
*
- * Current CPU's IRQ worklist table is locked into %g1,
- * don't touch.
+ * Current CPU's IRQ worklist table is locked into %g6, don't touch.
*/
.text
.align 32
ba,pt %xcc, rtrap
clr %l6
- /* Capture I/D/E-cache state into per-cpu error scoreboard.
- *
- * %g1: (TL>=0) ? 1 : 0
- * %g2: scratch
- * %g3: scratch
- * %g4: AFSR
- * %g5: AFAR
- * %g6: current thread ptr
- * %g7: scratch
- */
-#define CHEETAH_LOG_ERROR \
- /* Put "TL1" software bit into AFSR. */ \
- and %g1, 0x1, %g1; \
- sllx %g1, 63, %g2; \
- or %g4, %g2, %g4; \
- /* Get log entry pointer for this cpu at this trap level. */ \
- BRANCH_IF_JALAPENO(g2,g3,50f) \
- ldxa [%g0] ASI_SAFARI_CONFIG, %g2; \
- srlx %g2, 17, %g2; \
- ba,pt %xcc, 60f; \
- and %g2, 0x3ff, %g2; \
-50: ldxa [%g0] ASI_JBUS_CONFIG, %g2; \
- srlx %g2, 17, %g2; \
- and %g2, 0x1f, %g2; \
-60: sllx %g2, 9, %g2; \
- sethi %hi(cheetah_error_log), %g3; \
- ldx [%g3 + %lo(cheetah_error_log)], %g3; \
- brz,pn %g3, 80f; \
- nop; \
- add %g3, %g2, %g3; \
- sllx %g1, 8, %g1; \
- add %g3, %g1, %g1; \
- /* %g1 holds pointer to the top of the logging scoreboard */ \
- ldx [%g1 + 0x0], %g7; \
- cmp %g7, -1; \
- bne,pn %xcc, 80f; \
- nop; \
- stx %g4, [%g1 + 0x0]; \
- stx %g5, [%g1 + 0x8]; \
- add %g1, 0x10, %g1; \
- /* %g1 now points to D-cache logging area */ \
- set 0x3ff8, %g2; /* DC_addr mask */ \
- and %g5, %g2, %g2; /* DC_addr bits of AFAR */ \
- srlx %g5, 12, %g3; \
- or %g3, 1, %g3; /* PHYS tag + valid */ \
-10: ldxa [%g2] ASI_DCACHE_TAG, %g7; \
- cmp %g3, %g7; /* TAG match? */ \
- bne,pt %xcc, 13f; \
- nop; \
- /* Yep, what we want, capture state. */ \
- stx %g2, [%g1 + 0x20]; \
- stx %g7, [%g1 + 0x28]; \
- /* A membar Sync is required before and after utag access. */ \
- membar #Sync; \
- ldxa [%g2] ASI_DCACHE_UTAG, %g7; \
- membar #Sync; \
- stx %g7, [%g1 + 0x30]; \
- ldxa [%g2] ASI_DCACHE_SNOOP_TAG, %g7; \
- stx %g7, [%g1 + 0x38]; \
- clr %g3; \
-12: ldxa [%g2 + %g3] ASI_DCACHE_DATA, %g7; \
- stx %g7, [%g1]; \
- add %g3, (1 << 5), %g3; \
- cmp %g3, (4 << 5); \
- bl,pt %xcc, 12b; \
- add %g1, 0x8, %g1; \
- ba,pt %xcc, 20f; \
- add %g1, 0x20, %g1; \
-13: sethi %hi(1 << 14), %g7; \
- add %g2, %g7, %g2; \
- srlx %g2, 14, %g7; \
- cmp %g7, 4; \
- bl,pt %xcc, 10b; \
- nop; \
- add %g1, 0x40, %g1; \
-20: /* %g1 now points to I-cache logging area */ \
- set 0x1fe0, %g2; /* IC_addr mask */ \
- and %g5, %g2, %g2; /* IC_addr bits of AFAR */ \
- sllx %g2, 1, %g2; /* IC_addr[13:6]==VA[12:5] */ \
- srlx %g5, (13 - 8), %g3; /* Make PTAG */ \
- andn %g3, 0xff, %g3; /* Mask off undefined bits */ \
-21: ldxa [%g2] ASI_IC_TAG, %g7; \
- andn %g7, 0xff, %g7; \
- cmp %g3, %g7; \
- bne,pt %xcc, 23f; \
- nop; \
- /* Yep, what we want, capture state. */ \
- stx %g2, [%g1 + 0x40]; \
- stx %g7, [%g1 + 0x48]; \
- add %g2, (1 << 3), %g2; \
- ldxa [%g2] ASI_IC_TAG, %g7; \
- add %g2, (1 << 3), %g2; \
- stx %g7, [%g1 + 0x50]; \
- ldxa [%g2] ASI_IC_TAG, %g7; \
- add %g2, (1 << 3), %g2; \
- stx %g7, [%g1 + 0x60]; \
- ldxa [%g2] ASI_IC_TAG, %g7; \
- stx %g7, [%g1 + 0x68]; \
- sub %g2, (3 << 3), %g2; \
- ldxa [%g2] ASI_IC_STAG, %g7; \
- stx %g7, [%g1 + 0x58]; \
- clr %g3; \
- srlx %g2, 2, %g2; \
-22: ldxa [%g2 + %g3] ASI_IC_INSTR, %g7; \
- stx %g7, [%g1]; \
- add %g3, (1 << 3), %g3; \
- cmp %g3, (8 << 3); \
- bl,pt %xcc, 22b; \
- add %g1, 0x8, %g1; \
- ba,pt %xcc, 30f; \
- add %g1, 0x30, %g1; \
-23: sethi %hi(1 << 14), %g7; \
- add %g2, %g7, %g2; \
- srlx %g2, 14, %g7; \
- cmp %g7, 4; \
- bl,pt %xcc, 21b; \
- nop; \
- add %g1, 0x70, %g1; \
-30: /* %g1 now points to E-cache logging area */ \
- andn %g5, (32 - 1), %g2; /* E-cache subblock */ \
- stx %g2, [%g1 + 0x20]; \
- ldxa [%g2] ASI_EC_TAG_DATA, %g7; \
- stx %g7, [%g1 + 0x28]; \
- ldxa [%g2] ASI_EC_R, %g0; \
- clr %g3; \
-31: ldxa [%g3] ASI_EC_DATA, %g7; \
- stx %g7, [%g1 + %g3]; \
- add %g3, 0x8, %g3; \
- cmp %g3, 0x20; \
- bl,pt %xcc, 31b; \
- nop; \
-80: /* DONE */
-
/* These get patched into the trap table at boot time
* once we know we have a cheetah processor.
*/
nop
do_cheetah_plus_data_parity:
- ba,pt %xcc, etrap
+ rdpr %pil, %g2
+ wrpr %g0, 15, %pil
+ ba,pt %xcc, etrap_irq
rd %pc, %g7
mov 0x0, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
- ba,pt %xcc, rtrap
- clr %l6
+ ba,a,pt %xcc, rtrap_irq
cheetah_plus_dcpe_trap_vector_tl1:
membar #Sync
nop
do_cheetah_plus_insn_parity:
- ba,pt %xcc, etrap
+ rdpr %pil, %g2
+ wrpr %g0, 15, %pil
+ ba,pt %xcc, etrap_irq
rd %pc, %g7
mov 0x1, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
- ba,pt %xcc, rtrap
- clr %l6
+ ba,a,pt %xcc, rtrap_irq
cheetah_plus_icpe_trap_vector_tl1:
membar #Sync
nop
wrpr %g1, %tl ! Restore original trap level
do_dcpe_tl1_nonfatal: /* Ok we may use interrupt globals safely. */
+ sethi %hi(dcache_parity_tl1_occurred), %g2
+ lduw [%g2 + %lo(dcache_parity_tl1_occurred)], %g1
+ add %g1, 1, %g1
+ stw %g1, [%g2 + %lo(dcache_parity_tl1_occurred)]
/* Reset D-cache parity */
sethi %hi(1 << 16), %g1 ! D-cache size
mov (1 << 5), %g2 ! D-cache line size
nop
wrpr %g1, %tl ! Restore original trap level
do_icpe_tl1_nonfatal: /* Ok we may use interrupt globals safely. */
+ sethi %hi(icache_parity_tl1_occurred), %g2
+ lduw [%g2 + %lo(icache_parity_tl1_occurred)], %g1
+ add %g1, 1, %g1
+ stw %g1, [%g2 + %lo(icache_parity_tl1_occurred)]
/* Flush I-cache */
sethi %hi(1 << 15), %g1 ! I-cache size
mov (1 << 5), %g2 ! I-cache line size
membar #Sync
retry
+ /* Capture I/D/E-cache state into per-cpu error scoreboard.
+ *
+ * %g1: (TL>=0) ? 1 : 0
+ * %g2: scratch
+ * %g3: scratch
+ * %g4: AFSR
+ * %g5: AFAR
+ * %g6: current thread ptr
+ * %g7: scratch
+ */
+__cheetah_log_error:
+ /* Put "TL1" software bit into AFSR. */
+ and %g1, 0x1, %g1
+ sllx %g1, 63, %g2
+ or %g4, %g2, %g4
+
+ /* Get log entry pointer for this cpu at this trap level. */
+ BRANCH_IF_JALAPENO(g2,g3,50f)
+ ldxa [%g0] ASI_SAFARI_CONFIG, %g2
+ srlx %g2, 17, %g2
+ ba,pt %xcc, 60f
+ and %g2, 0x3ff, %g2
+
+50: ldxa [%g0] ASI_JBUS_CONFIG, %g2
+ srlx %g2, 17, %g2
+ and %g2, 0x1f, %g2
+
+60: sllx %g2, 9, %g2
+ sethi %hi(cheetah_error_log), %g3
+ ldx [%g3 + %lo(cheetah_error_log)], %g3
+ brz,pn %g3, 80f
+ nop
+
+ add %g3, %g2, %g3
+ sllx %g1, 8, %g1
+ add %g3, %g1, %g1
+
+ /* %g1 holds pointer to the top of the logging scoreboard */
+ ldx [%g1 + 0x0], %g7
+ cmp %g7, -1
+ bne,pn %xcc, 80f
+ nop
+
+ stx %g4, [%g1 + 0x0]
+ stx %g5, [%g1 + 0x8]
+ add %g1, 0x10, %g1
+
+ /* %g1 now points to D-cache logging area */
+ set 0x3ff8, %g2 /* DC_addr mask */
+ and %g5, %g2, %g2 /* DC_addr bits of AFAR */
+ srlx %g5, 12, %g3
+ or %g3, 1, %g3 /* PHYS tag + valid */
+
+10: ldxa [%g2] ASI_DCACHE_TAG, %g7
+ cmp %g3, %g7 /* TAG match? */
+ bne,pt %xcc, 13f
+ nop
+
+ /* Yep, what we want, capture state. */
+ stx %g2, [%g1 + 0x20]
+ stx %g7, [%g1 + 0x28]
+
+ /* A membar Sync is required before and after utag access. */
+ membar #Sync
+ ldxa [%g2] ASI_DCACHE_UTAG, %g7
+ membar #Sync
+ stx %g7, [%g1 + 0x30]
+ ldxa [%g2] ASI_DCACHE_SNOOP_TAG, %g7
+ stx %g7, [%g1 + 0x38]
+ clr %g3
+
+12: ldxa [%g2 + %g3] ASI_DCACHE_DATA, %g7
+ stx %g7, [%g1]
+ add %g3, (1 << 5), %g3
+ cmp %g3, (4 << 5)
+ bl,pt %xcc, 12b
+ add %g1, 0x8, %g1
+
+ ba,pt %xcc, 20f
+ add %g1, 0x20, %g1
+
+13: sethi %hi(1 << 14), %g7
+ add %g2, %g7, %g2
+ srlx %g2, 14, %g7
+ cmp %g7, 4
+ bl,pt %xcc, 10b
+ nop
+
+ add %g1, 0x40, %g1
+
+ /* %g1 now points to I-cache logging area */
+20: set 0x1fe0, %g2 /* IC_addr mask */
+ and %g5, %g2, %g2 /* IC_addr bits of AFAR */
+ sllx %g2, 1, %g2 /* IC_addr[13:6]==VA[12:5] */
+ srlx %g5, (13 - 8), %g3 /* Make PTAG */
+ andn %g3, 0xff, %g3 /* Mask off undefined bits */
+
+21: ldxa [%g2] ASI_IC_TAG, %g7
+ andn %g7, 0xff, %g7
+ cmp %g3, %g7
+ bne,pt %xcc, 23f
+ nop
+
+ /* Yep, what we want, capture state. */
+ stx %g2, [%g1 + 0x40]
+ stx %g7, [%g1 + 0x48]
+ add %g2, (1 << 3), %g2
+ ldxa [%g2] ASI_IC_TAG, %g7
+ add %g2, (1 << 3), %g2
+ stx %g7, [%g1 + 0x50]
+ ldxa [%g2] ASI_IC_TAG, %g7
+ add %g2, (1 << 3), %g2
+ stx %g7, [%g1 + 0x60]
+ ldxa [%g2] ASI_IC_TAG, %g7
+ stx %g7, [%g1 + 0x68]
+ sub %g2, (3 << 3), %g2
+ ldxa [%g2] ASI_IC_STAG, %g7
+ stx %g7, [%g1 + 0x58]
+ clr %g3
+ srlx %g2, 2, %g2
+
+22: ldxa [%g2 + %g3] ASI_IC_INSTR, %g7
+ stx %g7, [%g1]
+ add %g3, (1 << 3), %g3
+ cmp %g3, (8 << 3)
+ bl,pt %xcc, 22b
+ add %g1, 0x8, %g1
+
+ ba,pt %xcc, 30f
+ add %g1, 0x30, %g1
+
+23: sethi %hi(1 << 14), %g7
+ add %g2, %g7, %g2
+ srlx %g2, 14, %g7
+ cmp %g7, 4
+ bl,pt %xcc, 21b
+ nop
+
+ add %g1, 0x70, %g1
+
+ /* %g1 now points to E-cache logging area */
+30: andn %g5, (32 - 1), %g2
+ stx %g2, [%g1 + 0x20]
+ ldxa [%g2] ASI_EC_TAG_DATA, %g7
+ stx %g7, [%g1 + 0x28]
+ ldxa [%g2] ASI_EC_R, %g0
+ clr %g3
+
+31: ldxa [%g3] ASI_EC_DATA, %g7
+ stx %g7, [%g1 + %g3]
+ add %g3, 0x8, %g3
+ cmp %g3, 0x20
+
+ bl,pt %xcc, 31b
+ nop
+80:
+ rdpr %tt, %g2
+ cmp %g2, 0x70
+ be c_fast_ecc
+ cmp %g2, 0x63
+ be c_cee
+ nop
+ ba,pt %xcc, c_deferred
+
/* Cheetah FECC trap handling, we get here from tl{0,1}_fecc
* in the trap table. That code has done a memory barrier
* and has disabled both the I-cache and D-cache in the DCU
stxa %g4, [%g0] ASI_AFSR
membar #Sync
- CHEETAH_LOG_ERROR
+ ba,pt %xcc, __cheetah_log_error
+ nop
+c_fast_ecc:
rdpr %pil, %g2
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
stxa %g4, [%g0] ASI_AFSR
membar #Sync
- CHEETAH_LOG_ERROR
+ ba,pt %xcc, __cheetah_log_error
+ nop
+c_cee:
rdpr %pil, %g2
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
stxa %g4, [%g0] ASI_AFSR
membar #Sync
- CHEETAH_LOG_ERROR
+ ba,pt %xcc, __cheetah_log_error
+ nop
+c_deferred:
rdpr %pil, %g2
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
projects / linux-2.6-omap-h63xx.git / blobdiff