#include <asm/hw_irq.h>
#include <asm/page.h>
#include <asm/irqflags.h>
+#include <asm/paravirt.h>
.code64
#define retint_kernel retint_restore_args
#endif
+#ifdef CONFIG_PARAVIRT
+ENTRY(native_irq_enable_syscall_ret)
+ movq %gs:pda_oldrsp,%rsp
+ swapgs
+ sysretq
+#endif /* CONFIG_PARAVIRT */
+
.macro TRACE_IRQS_IRETQ offset=ARGOFFSET
#ifdef CONFIG_TRACE_IRQFLAGS
CFI_DEF_CFA rsp,PDA_STACKOFFSET
CFI_REGISTER rip,rcx
/*CFI_REGISTER rflags,r11*/
- swapgs
+ SWAPGS_UNSAFE_STACK
+ /*
+ * A hypervisor implementation might want to use a label
+ * after the swapgs, so that it can do the swapgs
+ * for the guest and jump here on syscall.
+ */
+ENTRY(system_call_after_swapgs)
+
movq %rsp,%gs:pda_oldrsp
movq %gs:pda_kernelstack,%rsp
/*
* No need to follow this irqs off/on section - it's straight
* and short:
*/
- sti
+ ENABLE_INTERRUPTS(CLBR_NONE)
SAVE_ARGS 8,1
movq %rax,ORIG_RAX-ARGOFFSET(%rsp)
movq %rcx,RIP-ARGOFFSET(%rsp)
movl $_TIF_ALLWORK_MASK,%edi
/* edi: flagmask */
sysret_check:
+ LOCKDEP_SYS_EXIT
GET_THREAD_INFO(%rcx)
- cli
+ DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
movl threadinfo_flags(%rcx),%edx
andl %edi,%edx
CFI_REGISTER rip,rcx
RESTORE_ARGS 0,-ARG_SKIP,1
/*CFI_REGISTER rflags,r11*/
- movq %gs:pda_oldrsp,%rsp
- swapgs
- sysretq
+ ENABLE_INTERRUPTS_SYSCALL_RET
CFI_RESTORE_STATE
/* Handle reschedules */
bt $TIF_NEED_RESCHED,%edx
jnc sysret_signal
TRACE_IRQS_ON
- sti
+ ENABLE_INTERRUPTS(CLBR_NONE)
pushq %rdi
CFI_ADJUST_CFA_OFFSET 8
call schedule
/* Handle a signal */
sysret_signal:
TRACE_IRQS_ON
- sti
- testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ testl $_TIF_DO_NOTIFY_MASK,%edx
jz 1f
/* Really a signal */
1: movl $_TIF_NEED_RESCHED,%edi
/* Use IRET because user could have changed frame. This
works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
- cli
+ DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
jmp int_with_check
*/
.globl int_ret_from_sys_call
int_ret_from_sys_call:
- cli
+ DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
testl $3,CS-ARGOFFSET(%rsp)
je retint_restore_args
movl $_TIF_ALLWORK_MASK,%edi
/* edi: mask to check */
int_with_check:
+ LOCKDEP_SYS_EXIT_IRQ
GET_THREAD_INFO(%rcx)
movl threadinfo_flags(%rcx),%edx
andl %edi,%edx
bt $TIF_NEED_RESCHED,%edx
jnc int_very_careful
TRACE_IRQS_ON
- sti
+ ENABLE_INTERRUPTS(CLBR_NONE)
pushq %rdi
CFI_ADJUST_CFA_OFFSET 8
call schedule
popq %rdi
CFI_ADJUST_CFA_OFFSET -8
- cli
+ DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
jmp int_with_check
/* handle signals and tracing -- both require a full stack frame */
int_very_careful:
TRACE_IRQS_ON
- sti
+ ENABLE_INTERRUPTS(CLBR_NONE)
SAVE_REST
/* Check for syscall exit trace */
testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx
jmp int_restore_rest
int_signal:
- testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx
+ testl $_TIF_DO_NOTIFY_MASK,%edx
jz 1f
movq %rsp,%rdi # &ptregs -> arg1
xorl %esi,%esi # oldset -> arg2
1: movl $_TIF_NEED_RESCHED,%edi
int_restore_rest:
RESTORE_REST
- cli
+ DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
jmp int_with_check
CFI_ENDPROC
CFI_DEF_CFA_REGISTER rbp
testl $3,CS(%rdi)
je 1f
- swapgs
+ SWAPGS
/* irqcount is used to check if a CPU is already on an interrupt
stack or not. While this is essentially redundant with preempt_count
it is a little cheaper to use a separate counter in the PDA
interrupt do_IRQ
/* 0(%rsp): oldrsp-ARGOFFSET */
ret_from_intr:
- cli
+ DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
decl %gs:pda_irqcount
leaveq
retint_with_reschedule:
movl $_TIF_WORK_MASK,%edi
retint_check:
+ LOCKDEP_SYS_EXIT_IRQ
movl threadinfo_flags(%rcx),%edx
andl %edi,%edx
CFI_REMEMBER_STATE
jnz retint_careful
-retint_swapgs:
+
+retint_swapgs: /* return to user-space */
/*
* The iretq could re-enable interrupts:
*/
- cli
+ DISABLE_INTERRUPTS(CLBR_ANY)
TRACE_IRQS_IRETQ
- swapgs
+ SWAPGS
jmp restore_args
-retint_restore_args:
- cli
+retint_restore_args: /* return to kernel space */
+ DISABLE_INTERRUPTS(CLBR_ANY)
/*
* The iretq could re-enable interrupts:
*/
TRACE_IRQS_IRETQ
restore_args:
RESTORE_ARGS 0,8,0
-iret_label:
+#ifdef CONFIG_PARAVIRT
+ INTERRUPT_RETURN
+#endif
+ENTRY(native_iret)
iretq
.section __ex_table,"a"
- .quad iret_label,bad_iret
+ .quad native_iret, bad_iret
.previous
.section .fixup,"ax"
- /* force a signal here? this matches i386 behaviour */
- /* running with kernel gs */
bad_iret:
- movq $11,%rdi /* SIGSEGV */
- TRACE_IRQS_ON
- sti
- jmp do_exit
- .previous
-
+ /*
+ * The iret traps when the %cs or %ss being restored is bogus.
+ * We've lost the original trap vector and error code.
+ * #GPF is the most likely one to get for an invalid selector.
+ * So pretend we completed the iret and took the #GPF in user mode.
+ *
+ * We are now running with the kernel GS after exception recovery.
+ * But error_entry expects us to have user GS to match the user %cs,
+ * so swap back.
+ */
+ pushq $0
+
+ SWAPGS
+ jmp general_protection
+
+ .previous
+
/* edi: workmask, edx: work */
retint_careful:
CFI_RESTORE_STATE
bt $TIF_NEED_RESCHED,%edx
jnc retint_signal
TRACE_IRQS_ON
- sti
+ ENABLE_INTERRUPTS(CLBR_NONE)
pushq %rdi
CFI_ADJUST_CFA_OFFSET 8
call schedule
popq %rdi
CFI_ADJUST_CFA_OFFSET -8
GET_THREAD_INFO(%rcx)
- cli
+ DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
jmp retint_check
retint_signal:
- testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx
+ testl $_TIF_DO_NOTIFY_MASK,%edx
jz retint_swapgs
TRACE_IRQS_ON
- sti
+ ENABLE_INTERRUPTS(CLBR_NONE)
SAVE_REST
movq $-1,ORIG_RAX(%rsp)
xorl %esi,%esi # oldset
movq %rsp,%rdi # &pt_regs
call do_notify_resume
RESTORE_REST
- cli
+ DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
movl $_TIF_NEED_RESCHED,%edi
GET_THREAD_INFO(%rcx)
rdmsr
testl %edx,%edx
js 1f
- swapgs
+ SWAPGS
xorl %ebx,%ebx
1:
.if \ist
.if \ist
addq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
.endif
- cli
+ DISABLE_INTERRUPTS(CLBR_NONE)
.if \irqtrace
TRACE_IRQS_OFF
.endif
.if \trace
TRACE_IRQS_IRETQ 0
.endif
- swapgs
+ SWAPGS_UNSAFE_STACK
paranoid_restore\trace:
RESTORE_ALL 8
- iretq
+ INTERRUPT_RETURN
paranoid_userspace\trace:
GET_THREAD_INFO(%rcx)
movl threadinfo_flags(%rcx),%ebx
.if \trace
TRACE_IRQS_ON
.endif
- sti
+ ENABLE_INTERRUPTS(CLBR_NONE)
xorl %esi,%esi /* arg2: oldset */
movq %rsp,%rdi /* arg1: &pt_regs */
call do_notify_resume
- cli
+ DISABLE_INTERRUPTS(CLBR_NONE)
.if \trace
TRACE_IRQS_OFF
.endif
.if \trace
TRACE_IRQS_ON
.endif
- sti
+ ENABLE_INTERRUPTS(CLBR_ANY)
call schedule
- cli
+ DISABLE_INTERRUPTS(CLBR_ANY)
.if \trace
TRACE_IRQS_OFF
.endif
testl $3,CS(%rsp)
je error_kernelspace
error_swapgs:
- swapgs
+ SWAPGS
error_sti:
movq %rdi,RDI(%rsp)
CFI_REL_OFFSET rdi,RDI
movq ORIG_RAX(%rsp),%rsi /* get error code */
movq $-1,ORIG_RAX(%rsp)
call *%rax
- /* ebx: no swapgs flag (1: don't need swapgs, 0: need it) */
-error_exit:
- movl %ebx,%eax
+ /* ebx: no swapgs flag (1: don't need swapgs, 0: need it) */
+error_exit:
+ movl %ebx,%eax
RESTORE_REST
- cli
+ DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
GET_THREAD_INFO(%rcx)
testl %eax,%eax
jne retint_kernel
+ LOCKDEP_SYS_EXIT_IRQ
movl threadinfo_flags(%rcx),%edx
movl $_TIF_WORK_MASK,%edi
andl %edi,%edx
jnz retint_careful
- /*
- * The iret might restore flags:
- */
- TRACE_IRQS_IRETQ
- swapgs
- RESTORE_ARGS 0,8,0
- jmp iret_label
+ jmp retint_swapgs
CFI_ENDPROC
error_kernelspace:
iret run with kernel gs again, so don't set the user space flag.
B stepping K8s sometimes report an truncated RIP for IRET
exceptions returning to compat mode. Check for these here too. */
- leaq iret_label(%rip),%rbp
+ leaq native_iret(%rip),%rbp
cmpq %rbp,RIP(%rsp)
je error_swapgs
movl %ebp,%ebp /* zero extend */
CFI_STARTPROC
pushf
CFI_ADJUST_CFA_OFFSET 8
- cli
- swapgs
+ DISABLE_INTERRUPTS(CLBR_ANY | ~(CLBR_RDI))
+ SWAPGS
gs_change:
movl %edi,%gs
2: mfence /* workaround */
- swapgs
+ SWAPGS
popf
CFI_ADJUST_CFA_OFFSET -8
ret
.section .fixup,"ax"
/* running with kernelgs */
bad_gs:
- swapgs /* switch back to user gs */
+ SWAPGS /* switch back to user gs */
xorl %eax,%eax
movl %eax,%gs
jmp 2b
movq %rsi, %rdi
call *%rax
# exit
- xorl %edi, %edi
+ mov %eax, %edi
call do_exit
CFI_ENDPROC
ENDPROC(child_rip)
projects / linux-2.6-omap-h63xx.git / blobdiff