#include <asm/proto.h>
#include <asm/acpi.h>
#include <asm/dma.h>
+#include <asm/i8259.h>
#include <asm/nmi.h>
#include <asm/msidef.h>
#include <asm/hypertransport.h>
static int disable_timer_pin_1 __initdata;
-static bool mask_ioapic_irq_2 __initdata;
-
-void __init force_mask_ioapic_irq_2(void)
-{
- mask_ioapic_irq_2 = true;
-}
-
int timer_through_8259 __initdata;
/* Where if anywhere is the i8259 connect in external int mode */
static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
static DEFINE_SPINLOCK(ioapic_lock);
-DEFINE_SPINLOCK(vector_lock);
+static DEFINE_SPINLOCK(vector_lock);
/*
* # of IRQ routing registers
return irq;
}
+void lock_vector_lock(void)
+{
+ /* Used to the online set of cpus does not change
+ * during assign_irq_vector.
+ */
+ spin_lock(&vector_lock);
+}
+
+void unlock_vector_lock(void)
+{
+ spin_unlock(&vector_lock);
+}
+
static int __assign_irq_vector(int irq, cpumask_t mask)
{
/*
return 0;
}
- for_each_cpu_mask(cpu, mask) {
+ for_each_cpu_mask_nr(cpu, mask) {
cpumask_t domain, new_mask;
int new_cpu;
int vector, offset;
continue;
if (vector == IA32_SYSCALL_VECTOR)
goto next;
- for_each_cpu_mask(new_cpu, new_mask)
+ for_each_cpu_mask_nr(new_cpu, new_mask)
if (per_cpu(vector_irq, new_cpu)[vector] != -1)
goto next;
/* Found one! */
cfg->move_in_progress = 1;
cfg->old_domain = cfg->domain;
}
- for_each_cpu_mask(new_cpu, new_mask)
+ for_each_cpu_mask_nr(new_cpu, new_mask)
per_cpu(vector_irq, new_cpu)[vector] = irq;
cfg->vector = vector;
cfg->domain = domain;
vector = cfg->vector;
cpus_and(mask, cfg->domain, cpu_online_map);
- for_each_cpu_mask(cpu, mask)
+ for_each_cpu_mask_nr(cpu, mask)
per_cpu(vector_irq, cpu)[vector] = -1;
cfg->vector = 0;
cpus_clear(cfg->domain);
}
-static void __setup_vector_irq(int cpu)
+void __setup_vector_irq(int cpu)
{
/* Initialize vector_irq on a new cpu */
/* This function must be called with vector_lock held */
}
}
-void setup_vector_irq(int cpu)
-{
- spin_lock(&vector_lock);
- __setup_vector_irq(smp_processor_id());
- spin_unlock(&vector_lock);
-}
-
-
static struct irq_chip ioapic_chip;
#ifdef CONFIG_INTR_REMAP
static struct irq_chip ir_ioapic_chip;
printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
smp_processor_id(), hard_smp_processor_id());
v = apic_read(APIC_ID);
- printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id()));
+ printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id());
v = apic_read(APIC_LVR);
printk(KERN_INFO "... APIC VERSION: %08x\n", v);
ver = GET_APIC_VERSION(v);
void print_all_local_APICs (void)
{
- on_each_cpu(print_local_APIC, NULL, 1, 1);
+ on_each_cpu(print_local_APIC, NULL, 1);
}
void __apicdebuginit print_PIC(void)
entry.dest_mode = 0; /* Physical */
entry.delivery_mode = dest_ExtINT; /* ExtInt */
entry.vector = 0;
- entry.dest = GET_APIC_ID(read_apic_id());
+ entry.dest = read_apic_id();
/*
* Add it to the IO-APIC irq-routing table:
static int ioapic_retrigger_irq(unsigned int irq)
{
struct irq_cfg *cfg = &irq_cfg[irq];
- cpumask_t mask;
unsigned long flags;
spin_lock_irqsave(&vector_lock, flags);
- mask = cpumask_of_cpu(first_cpu(cfg->domain));
- send_IPI_mask(mask, cfg->vector);
+ send_IPI_mask(cpumask_of_cpu(first_cpu(cfg->domain)), cfg->vector);
spin_unlock_irqrestore(&vector_lock, flags);
return 1;
pin2 = ioapic_i8259.pin;
apic2 = ioapic_i8259.apic;
- apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
- cfg->vector, apic1, pin1, apic2, pin2);
-
- if (mask_ioapic_irq_2)
- mask_IO_APIC_irq(2);
+ apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
+ "apic1=%d pin1=%d apic2=%d pin2=%d\n",
+ cfg->vector, apic1, pin1, apic2, pin2);
/*
* Some BIOS writers are clueless and report the ExtINTA
panic("timer doesn't work through Interrupt-remapped IO-APIC");
clear_IO_APIC_pin(apic1, pin1);
if (!no_pin1)
- apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: "
+ apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
"8254 timer not connected to IO-APIC\n");
- apic_printk(APIC_VERBOSE,KERN_INFO
- "...trying to set up timer (IRQ0) "
- "through the 8259A ... ");
- apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...",
- apic2, pin2);
+ apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
+ "(IRQ0) through the 8259A ...\n");
+ apic_printk(APIC_QUIET, KERN_INFO
+ "..... (found apic %d pin %d) ...\n", apic2, pin2);
/*
* legacy devices should be connected to IO APIC #0
*/
unmask_IO_APIC_irq(0);
enable_8259A_irq(0);
if (timer_irq_works()) {
- apic_printk(APIC_VERBOSE," works.\n");
+ apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
timer_through_8259 = 1;
if (nmi_watchdog == NMI_IO_APIC) {
disable_8259A_irq(0);
*/
disable_8259A_irq(0);
clear_IO_APIC_pin(apic2, pin2);
- apic_printk(APIC_VERBOSE," failed.\n");
+ apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
}
if (nmi_watchdog == NMI_IO_APIC) {
- printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
+ apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
+ "through the IO-APIC - disabling NMI Watchdog!\n");
nmi_watchdog = NMI_NONE;
}
- apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
+ apic_printk(APIC_QUIET, KERN_INFO
+ "...trying to set up timer as Virtual Wire IRQ...\n");
lapic_register_intr(0);
apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */
enable_8259A_irq(0);
if (timer_irq_works()) {
- apic_printk(APIC_VERBOSE," works.\n");
+ apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
goto out;
}
disable_8259A_irq(0);
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
- apic_printk(APIC_VERBOSE," failed.\n");
+ apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
- apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ...");
+ apic_printk(APIC_QUIET, KERN_INFO
+ "...trying to set up timer as ExtINT IRQ...\n");
init_8259A(0);
make_8259A_irq(0);
unlock_ExtINT_logic();
if (timer_irq_works()) {
- apic_printk(APIC_VERBOSE," works.\n");
+ apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
goto out;
}
- apic_printk(APIC_VERBOSE," failed :(.\n");
- panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n");
+ apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
+ panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a "
+ "report. Then try booting with the 'noapic' option.\n");
out:
local_irq_restore(flags);
}