static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
{
u8 config, rev;
- u32 word;
+ u16 word;
/* BIOS may enable hardware IRQ balancing for
* E7520/E7320/E7525(revision ID 0x9 and below)
pci_read_config_byte(dev, 0xf4, &config);
pci_write_config_byte(dev, 0xf4, config|0x2);
- /* read xTPR register */
- raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word);
+ /*
+ * read xTPR register. We may not have a pci_dev for device 8
+ * because it might be hidden until the above write.
+ */
+ pci_bus_read_config_word(dev->bus, PCI_DEVFN(8, 0), 0x4c, &word);
if (!(word & (1 << 13))) {
- printk(KERN_INFO "Intel E7520/7320/7525 detected. "
- "Disabling irq balancing and affinity\n");
+ dev_info(&dev->dev, "Intel E7520/7320/7525 detected; "
+ "disabling irq balancing and affinity\n");
#ifdef CONFIG_IRQBALANCE
irqbalance_disable("");
#endif
ICH_FORCE_HPET_RESUME,
VT8237_FORCE_HPET_RESUME,
NVIDIA_FORCE_HPET_RESUME,
+ ATI_FORCE_HPET_RESUME,
} force_hpet_resume_type;
static void __iomem *rcba_base;
pci_read_config_dword(dev, 0xF0, &rcba);
rcba &= 0xFFFFC000;
if (rcba == 0) {
- printk(KERN_DEBUG "RCBA disabled. Cannot force enable HPET\n");
+ dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; "
+ "cannot force enable HPET\n");
return;
}
/* use bits 31:14, 16 kB aligned */
rcba_base = ioremap_nocache(rcba, 0x4000);
if (rcba_base == NULL) {
- printk(KERN_DEBUG "ioremap failed. Cannot force enable HPET\n");
+ dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; "
+ "cannot force enable HPET\n");
return;
}
/* HPET is enabled in HPTC. Just not reported by BIOS */
val = val & 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
- printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
iounmap(rcba_base);
return;
}
if (err) {
force_hpet_address = 0;
iounmap(rcba_base);
- printk(KERN_DEBUG "Failed to force enable HPET\n");
+ dev_printk(KERN_DEBUG, &dev->dev,
+ "Failed to force enable HPET\n");
} else {
force_hpet_resume_type = ICH_FORCE_HPET_RESUME;
- printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,
+ ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,
static struct pci_dev *cached_dev;
+static void hpet_print_force_info(void)
+{
+ printk(KERN_INFO "HPET not enabled in BIOS. "
+ "You might try hpet=force boot option\n");
+}
+
static void old_ich_force_hpet_resume(void)
{
u32 val;
if (val & 0x4) {
val &= 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
- printk(KERN_DEBUG "HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
+ force_hpet_address);
return;
}
/* HPET is enabled in HPTC. Just not reported by BIOS */
val &= 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
- printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
cached_dev = dev;
force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME;
return;
}
- printk(KERN_DEBUG "Failed to force enable HPET\n");
+ dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
}
/*
{
if (hpet_force_user)
old_ich_force_enable_hpet(dev);
+ else
+ hpet_print_force_info();
}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
+ old_ich_force_enable_hpet_user);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
old_ich_force_enable_hpet_user);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12,
{
u32 uninitialized_var(val);
- if (!hpet_force_user || hpet_address || force_hpet_address)
+ if (hpet_address || force_hpet_address)
+ return;
+
+ if (!hpet_force_user) {
+ hpet_print_force_info();
return;
+ }
pci_read_config_dword(dev, 0x68, &val);
/*
*/
if (val & 0x80) {
force_hpet_address = (val & ~0x3ff);
- printk(KERN_DEBUG "HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
+ force_hpet_address);
return;
}
pci_read_config_dword(dev, 0x68, &val);
if (val & 0x80) {
force_hpet_address = (val & ~0x3ff);
- printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
- force_hpet_address);
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
cached_dev = dev;
force_hpet_resume_type = VT8237_FORCE_HPET_RESUME;
return;
}
- printk(KERN_DEBUG "Failed to force enable HPET\n");
+ dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235,
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
vt8237_force_enable_hpet);
+static void ati_force_hpet_resume(void)
+{
+ pci_write_config_dword(cached_dev, 0x14, 0xfed00000);
+ printk(KERN_DEBUG "Force enabled HPET at resume\n");
+}
+
+static void ati_force_enable_hpet(struct pci_dev *dev)
+{
+ u32 uninitialized_var(val);
+
+ if (hpet_address || force_hpet_address)
+ return;
+
+ if (!hpet_force_user) {
+ hpet_print_force_info();
+ return;
+ }
+
+ pci_write_config_dword(dev, 0x14, 0xfed00000);
+ pci_read_config_dword(dev, 0x14, &val);
+ force_hpet_address = val;
+ force_hpet_resume_type = ATI_FORCE_HPET_RESUME;
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
+ force_hpet_address);
+ cached_dev = dev;
+ return;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
+ ati_force_enable_hpet);
+
/*
* Undocumented chipset feature taken from LinuxBIOS.
*/
{
u32 uninitialized_var(val);
- if (!hpet_force_user || hpet_address || force_hpet_address)
+ if (hpet_address || force_hpet_address)
return;
+ if (!hpet_force_user) {
+ hpet_print_force_info();
+ return;
+ }
+
pci_write_config_dword(dev, 0x44, 0xfed00001);
pci_read_config_dword(dev, 0x44, &val);
force_hpet_address = val & 0xfffffffe;
force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME;
- printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
force_hpet_address);
cached_dev = dev;
return;
nvidia_force_enable_hpet);
/* LPC bridges */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0260,
+ nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0360,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0361,
void force_hpet_resume(void)
{
switch (force_hpet_resume_type) {
- case ICH_FORCE_HPET_RESUME:
- return ich_force_hpet_resume();
-
- case OLD_ICH_FORCE_HPET_RESUME:
- return old_ich_force_hpet_resume();
-
- case VT8237_FORCE_HPET_RESUME:
- return vt8237_force_hpet_resume();
-
- case NVIDIA_FORCE_HPET_RESUME:
- return nvidia_force_hpet_resume();
-
- default:
+ case ICH_FORCE_HPET_RESUME:
+ ich_force_hpet_resume();
+ return;
+ case OLD_ICH_FORCE_HPET_RESUME:
+ old_ich_force_hpet_resume();
+ return;
+ case VT8237_FORCE_HPET_RESUME:
+ vt8237_force_hpet_resume();
+ return;
+ case NVIDIA_FORCE_HPET_RESUME:
+ nvidia_force_hpet_resume();
+ return;
+ case ATI_FORCE_HPET_RESUME:
+ ati_force_hpet_resume();
+ return;
+ default:
break;
}
}
projects / linux-2.6-omap-h63xx.git / blobdiff