* x86 SMP booting functions
*
* (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
- * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ * (c) 1998, 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
* Copyright 2001 Andi Kleen, SuSE Labs.
*
* Much of the core SMP work is based on previous work by Thomas Radke, to
#include <asm/nmi.h>
#include <asm/irq.h>
#include <asm/idle.h>
-#include <asm/smp.h>
#include <asm/trampoline.h>
#include <asm/cpu.h>
#include <asm/numa.h>
#include <asm/tlbflush.h>
#include <asm/mtrr.h>
#include <asm/vmi.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
#include <asm/setup.h>
+#include <asm/uv/uv.h>
#include <linux/mc146818rtc.h>
-#include <mach_apic.h>
-#include <mach_wakecpu.h>
-#include <smpboot_hooks.h>
+#include <asm/smpboot_hooks.h>
#ifdef CONFIG_X86_32
u8 apicid_2_node[MAX_APICID];
{
int cpu = smp_processor_id();
int apicid = logical_smp_processor_id();
- int node = apicid_to_node(apicid);
+ int node = apic->apicid_to_node(apicid);
if (!node_online(node))
node = first_online_node;
* our local APIC. We have to wait for the IPI or we'll
* lock up on an APIC access.
*/
- wait_for_init_deassert(&init_deasserted);
+ if (apic->wait_for_init_deassert)
+ apic->wait_for_init_deassert(&init_deasserted);
/*
* (This works even if the APIC is not enabled.)
*/
pr_debug("CALLIN, before setup_local_APIC().\n");
- smp_callin_clear_local_apic();
+ if (apic->smp_callin_clear_local_apic)
+ apic->smp_callin_clear_local_apic();
setup_local_APIC();
end_local_APIC_setup();
map_cpu_to_logical_apicid();
/* Target chip */
/* Boot on the stack */
/* Kick the second */
- apic_icr_write(APIC_DM_NMI | APIC_DEST_LOGICAL, logical_apicid);
+ apic_icr_write(APIC_DM_NMI | apic->dest_logical, logical_apicid);
pr_debug("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
complete(&c_idle->done);
}
-#ifdef CONFIG_X86_64
-
-/* __ref because it's safe to call free_bootmem when after_bootmem == 0. */
-static void __ref free_bootmem_pda(struct x8664_pda *oldpda)
-{
- if (!after_bootmem)
- free_bootmem((unsigned long)oldpda, sizeof(*oldpda));
-}
-
-/*
- * Allocate node local memory for the AP pda.
- *
- * Must be called after the _cpu_pda pointer table is initialized.
- */
-int __cpuinit get_local_pda(int cpu)
-{
- struct x8664_pda *oldpda, *newpda;
- unsigned long size = sizeof(struct x8664_pda);
- int node = cpu_to_node(cpu);
-
- if (cpu_pda(cpu) && !cpu_pda(cpu)->in_bootmem)
- return 0;
-
- oldpda = cpu_pda(cpu);
- newpda = kmalloc_node(size, GFP_ATOMIC, node);
- if (!newpda) {
- printk(KERN_ERR "Could not allocate node local PDA "
- "for CPU %d on node %d\n", cpu, node);
-
- if (oldpda)
- return 0; /* have a usable pda */
- else
- return -1;
- }
-
- if (oldpda) {
- memcpy(newpda, oldpda, size);
- free_bootmem_pda(oldpda);
- }
-
- newpda->in_bootmem = 0;
- cpu_pda(cpu) = newpda;
- return 0;
-}
-#endif /* CONFIG_X86_64 */
-
-static int __cpuinit do_boot_cpu(int apicid, int cpu)
/*
* NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
* (ie clustered apic addressing mode), this is a LOGICAL apic ID.
- * Returns zero if CPU booted OK, else error code from wakeup_secondary_cpu.
+ * Returns zero if CPU booted OK, else error code from ->wakeup_cpu.
*/
+static int __cpuinit do_boot_cpu(int apicid, int cpu)
{
unsigned long boot_error = 0;
- int timeout;
unsigned long start_ip;
- unsigned short nmi_high = 0, nmi_low = 0;
+ int timeout;
struct create_idle c_idle = {
- .cpu = cpu,
- .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
+ .cpu = cpu,
+ .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
};
- INIT_WORK(&c_idle.work, do_fork_idle);
-#ifdef CONFIG_X86_64
- /* Allocate node local memory for AP pdas */
- if (cpu > 0) {
- boot_error = get_local_pda(cpu);
- if (boot_error)
- goto restore_state;
- /* if can't get pda memory, can't start cpu */
- }
-#endif
+ INIT_WORK(&c_idle.work, do_fork_idle);
alternatives_smp_switch(1);
set_idle_for_cpu(cpu, c_idle.idle);
do_rest:
-#ifdef CONFIG_X86_32
per_cpu(current_task, cpu) = c_idle.idle;
- init_gdt(cpu);
+#ifdef CONFIG_X86_32
/* Stack for startup_32 can be just as for start_secondary onwards */
irq_ctx_init(cpu);
#else
- cpu_pda(cpu)->pcurrent = c_idle.idle;
clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
+ initial_gs = per_cpu_offset(cpu);
+ per_cpu(kernel_stack, cpu) =
+ (unsigned long)task_stack_page(c_idle.idle) -
+ KERNEL_STACK_OFFSET + THREAD_SIZE;
#endif
early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
initial_code = (unsigned long)start_secondary;
pr_debug("Setting warm reset code and vector.\n");
- store_NMI_vector(&nmi_high, &nmi_low);
-
smpboot_setup_warm_reset_vector(start_ip);
/*
* Be paranoid about clearing APIC errors.
/*
* Starting actual IPI sequence...
*/
- boot_error = wakeup_secondary_cpu(apicid, start_ip);
+ boot_error = apic->wakeup_cpu(apicid, start_ip);
if (!boot_error) {
/*
else
/* trampoline code not run */
printk(KERN_ERR "Not responding.\n");
- if (get_uv_system_type() != UV_NON_UNIQUE_APIC)
- inquire_remote_apic(apicid);
+ if (apic->inquire_remote_apic)
+ apic->inquire_remote_apic(apicid);
}
}
-#ifdef CONFIG_X86_64
-restore_state:
-#endif
+
if (boot_error) {
/* Try to put things back the way they were before ... */
numa_remove_cpu(cpu); /* was set by numa_add_cpu */
int __cpuinit native_cpu_up(unsigned int cpu)
{
- int apicid = cpu_present_to_apicid(cpu);
+ int apicid = apic->cpu_present_to_apicid(cpu);
unsigned long flags;
int err;
{
preempt_disable();
-#if defined(CONFIG_X86_PC) && defined(CONFIG_X86_32)
+#if !defined(CONFIG_X86_BIGSMP) && defined(CONFIG_X86_32)
if (def_to_bigsmp && nr_cpu_ids > 8) {
unsigned int cpu;
unsigned nr;
printk(KERN_WARNING
"More than 8 CPUs detected - skipping them.\n"
- "Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.\n");
+ "Use CONFIG_X86_BIGSMP.\n");
nr = 0;
for_each_present_cpu(cpu) {
* Should not be necessary because the MP table should list the boot
* CPU too, but we do it for the sake of robustness anyway.
*/
- if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
+ if (!apic->check_phys_apicid_present(boot_cpu_physical_apicid)) {
printk(KERN_NOTICE
"weird, boot CPU (#%d) not listed by the BIOS.\n",
boot_cpu_physical_apicid);
printk(KERN_ERR "... forcing use of dummy APIC emulation."
"(tell your hw vendor)\n");
smpboot_clear_io_apic();
+ arch_disable_smp_support();
return -1;
}
current_thread_info()->cpu = 0; /* needed? */
set_cpu_sibling_map(0);
-#ifdef CONFIG_X86_64
enable_IR_x2apic();
- setup_apic_routing();
+#ifdef CONFIG_X86_64
+ default_setup_apic_routing();
#endif
if (smp_sanity_check(max_cpus) < 0) {
*/
setup_local_APIC();
-#ifdef CONFIG_X86_64
/*
* Enable IO APIC before setting up error vector
*/
if (!skip_ioapic_setup && nr_ioapics)
enable_IO_APIC();
-#endif
+
end_local_APIC_setup();
map_cpu_to_logical_apicid();
- setup_portio_remap();
+ if (apic->setup_portio_remap)
+ apic->setup_portio_remap();
smpboot_setup_io_apic();
/*
void __init native_smp_prepare_boot_cpu(void)
{
int me = smp_processor_id();
-#ifdef CONFIG_X86_32
- init_gdt(me);
-#endif
- switch_to_new_gdt();
+ switch_to_new_gdt(me);
/* already set me in cpu_online_mask in boot_cpu_init() */
cpumask_set_cpu(me, cpu_callout_mask);
per_cpu(cpu_state, me) = CPU_ONLINE;
projects / linux-2.6-omap-h63xx.git / blobdiff