#include "pci.h"
-#define MMCONFIG_APER_SIZE (256*1024*1024)
+/* aperture is up to 256MB but BIOS may reserve less */
+#define MMCONFIG_APER_MIN (2 * 1024*1024)
+#define MMCONFIG_APER_MAX (256 * 1024*1024)
+
/* Verify the first 16 busses. We assume that systems with more busses
get MCFG right. */
#define MAX_CHECK_BUS 16
char __iomem *addr;
/* Why do we have this when nobody checks it. How about a BUG()!? -AK */
- if (unlikely(!value || (bus > 255) || (devfn > 255) || (reg > 4095))) {
+ if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) {
*value = -1;
return -EINVAL;
}
{
int i, k;
/* Use the max bus number from ACPI here? */
- for (k = 0; i < MAX_CHECK_BUS; k++) {
+ for (k = 0; k < MAX_CHECK_BUS; k++) {
for (i = 0; i < 32; i++) {
u32 val1;
char __iomem *addr;
addr = pci_dev_base(0, k, PCI_DEVFN(i, 0));
if (addr == NULL|| readl(addr) != val1) {
set_bit(i + 32*k, fallback_slots);
- printk(KERN_NOTICE
- "PCI: No mmconfig possible on device %x:%x\n",
- k, i);
+ printk(KERN_NOTICE "PCI: No mmconfig possible"
+ " on device %02x:%02x\n", k, i);
}
}
}
}
-void __init pci_mmcfg_init(void)
+static __init void pci_mmcfg_insert_resources(void)
+{
+#define PCI_MMCFG_RESOURCE_NAME_LEN 19
+ int i;
+ struct resource *res;
+ char *names;
+ unsigned num_buses;
+
+ res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res),
+ pci_mmcfg_config_num, GFP_KERNEL);
+
+ if (!res) {
+ printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n");
+ return;
+ }
+
+ names = (void *)&res[pci_mmcfg_config_num];
+ for (i = 0; i < pci_mmcfg_config_num; i++, res++) {
+ num_buses = pci_mmcfg_config[i].end_bus_number -
+ pci_mmcfg_config[i].start_bus_number + 1;
+ res->name = names;
+ snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u",
+ pci_mmcfg_config[i].pci_segment_group_number);
+ res->start = pci_mmcfg_config[i].base_address;
+ res->end = res->start + (num_buses << 20) - 1;
+ res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ insert_resource(&iomem_resource, res);
+ names += PCI_MMCFG_RESOURCE_NAME_LEN;
+ }
+}
+
+void __init pci_mmcfg_init(int type)
{
int i;
(pci_mmcfg_config[0].base_address == 0))
return;
- if (!e820_all_mapped(pci_mmcfg_config[0].base_address,
- pci_mmcfg_config[0].base_address + MMCONFIG_APER_SIZE,
+ /* Only do this check when type 1 works. If it doesn't work
+ assume we run on a Mac and always use MCFG */
+ if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address,
+ pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
E820_RESERVED)) {
- printk(KERN_ERR "PCI: BIOS Bug: MCFG area is not E820-reserved\n");
+ printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
+ pci_mmcfg_config[0].base_address);
printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
return;
}
- /* RED-PEN i386 doesn't do _nocache right now */
pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL);
if (pci_mmcfg_virt == NULL) {
printk("PCI: Can not allocate memory for mmconfig structures\n");
}
for (i = 0; i < pci_mmcfg_config_num; ++i) {
pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
- pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address, MMCONFIG_APER_SIZE);
+ pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address,
+ MMCONFIG_APER_MAX);
if (!pci_mmcfg_virt[i].virt) {
printk("PCI: Cannot map mmconfig aperture for segment %d\n",
pci_mmcfg_config[i].pci_segment_group_number);
}
unreachable_devices();
+ pci_mmcfg_insert_resources();
raw_pci_ops = &pci_mmcfg;
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;