*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define _COMPONENT ACPI_DISPATCHER
ACPI_MODULE_NAME("dsobject")
+/* Local prototypes */
static acpi_status
acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
union acpi_parse_object *op,
union acpi_operand_object *obj_desc;
acpi_status status;
- ACPI_FUNCTION_TRACE("ds_build_internal_object");
+ ACPI_FUNCTION_TRACE(ds_build_internal_object);
*obj_desc_ptr = NULL;
if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
/*
- * This is an named object reference. If this name was
+ * This is a named object reference. If this name was
* previously looked up in the namespace, it was stored in this op.
* Otherwise, go ahead and look it up now
*/
ACPI_IMODE_EXECUTE,
ACPI_NS_SEARCH_PARENT |
ACPI_NS_DONT_OPEN_SCOPE, NULL,
- (struct acpi_namespace_node **)
- &(op->common.node));
+ ACPI_CAST_INDIRECT_PTR(struct
+ acpi_namespace_node,
+ &(op->
+ common.
+ node)));
+ if (ACPI_FAILURE(status)) {
+
+ /* Check if we are resolving a named reference within a package */
+
+ if ((status == AE_NOT_FOUND)
+ && (acpi_gbl_enable_interpreter_slack)
+ &&
+ ((op->common.parent->common.aml_opcode ==
+ AML_PACKAGE_OP)
+ || (op->common.parent->common.aml_opcode ==
+ AML_VAR_PACKAGE_OP))) {
+ /*
+ * We didn't find the target and we are populating elements
+ * of a package - ignore if slack enabled. Some ASL code
+ * contains dangling invalid references in packages and
+ * expects that no exception will be issued. Leave the
+ * element as a null element. It cannot be used, but it
+ * can be overwritten by subsequent ASL code - this is
+ * typically the case.
+ */
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Ignoring unresolved reference in package [%4.4s]\n",
+ walk_state->
+ scope_info->scope.
+ node->name.ascii));
+
+ return_ACPI_STATUS(AE_OK);
+ } else {
+ ACPI_ERROR_NAMESPACE(op->common.value.
+ string, status);
+ }
+
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ /* Special object resolution for elements of a package */
+ if ((op->common.parent->common.aml_opcode == AML_PACKAGE_OP) ||
+ (op->common.parent->common.aml_opcode ==
+ AML_VAR_PACKAGE_OP)) {
+ /*
+ * Attempt to resolve the node to a value before we insert it into
+ * the package. If this is a reference to a common data type,
+ * resolve it immediately. According to the ACPI spec, package
+ * elements can only be "data objects" or method references.
+ * Attempt to resolve to an Integer, Buffer, String or Package.
+ * If cannot, return the named reference (for things like Devices,
+ * Methods, etc.) Buffer Fields and Fields will resolve to simple
+ * objects (int/buf/str/pkg).
+ *
+ * NOTE: References to things like Devices, Methods, Mutexes, etc.
+ * will remain as named references. This behavior is not described
+ * in the ACPI spec, but it appears to be an oversight.
+ */
+ obj_desc = (union acpi_operand_object *)op->common.node;
+
+ status =
+ acpi_ex_resolve_node_to_value(ACPI_CAST_INDIRECT_PTR
+ (struct
+ acpi_namespace_node,
+ &obj_desc),
+ walk_state);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_NSERROR(op->common.value.string,
- status);
return_ACPI_STATUS(status);
}
+
+ switch (op->common.node->type) {
+ /*
+ * For these types, we need the actual node, not the subobject.
+ * However, the subobject got an extra reference count above.
+ */
+ case ACPI_TYPE_MUTEX:
+ case ACPI_TYPE_METHOD:
+ case ACPI_TYPE_POWER:
+ case ACPI_TYPE_PROCESSOR:
+ case ACPI_TYPE_EVENT:
+ case ACPI_TYPE_REGION:
+ case ACPI_TYPE_DEVICE:
+ case ACPI_TYPE_THERMAL:
+
+ obj_desc =
+ (union acpi_operand_object *)op->common.
+ node;
+ break;
+
+ default:
+ break;
+ }
+
+ /*
+ * If above resolved to an operand object, we are done. Otherwise,
+ * we have a NS node, we must create the package entry as a named
+ * reference.
+ */
+ if (ACPI_GET_DESCRIPTOR_TYPE(obj_desc) !=
+ ACPI_DESC_TYPE_NAMED) {
+ goto exit;
+ }
}
}
- /* Create and init the internal ACPI object */
+ /* Create and init a new internal ACPI object */
obj_desc = acpi_ut_create_internal_object((acpi_ps_get_opcode_info
(op->common.aml_opcode))->
return_ACPI_STATUS(status);
}
+ exit:
*obj_desc_ptr = obj_desc;
return_ACPI_STATUS(AE_OK);
}
union acpi_parse_object *byte_list;
u32 byte_list_length = 0;
- ACPI_FUNCTION_TRACE("ds_build_internal_buffer_obj");
+ ACPI_FUNCTION_TRACE(ds_build_internal_buffer_obj);
+ /*
+ * If we are evaluating a Named buffer object "Name (xxxx, Buffer)".
+ * The buffer object already exists (from the NS node), otherwise it must
+ * be created.
+ */
obj_desc = *obj_desc_ptr;
- if (obj_desc) {
- /*
- * We are evaluating a Named buffer object "Name (xxxx, Buffer)".
- * The buffer object already exists (from the NS node)
- */
- } else {
+ if (!obj_desc) {
+
/* Create a new buffer object */
obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER);
byte_list = arg->named.next;
if (byte_list) {
if (byte_list->common.aml_opcode != AML_INT_BYTELIST_OP) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Expecting bytelist, got AML opcode %X in op %p\n",
- byte_list->common.aml_opcode,
- byte_list));
+ ACPI_ERROR((AE_INFO,
+ "Expecting bytelist, got AML opcode %X in op %p",
+ byte_list->common.aml_opcode, byte_list));
acpi_ut_remove_reference(obj_desc);
return (AE_TYPE);
"Buffer defined with zero length in AML, creating\n"));
} else {
obj_desc->buffer.pointer =
- ACPI_MEM_CALLOCATE(obj_desc->buffer.length);
+ ACPI_ALLOCATE_ZEROED(obj_desc->buffer.length);
if (!obj_desc->buffer.pointer) {
acpi_ut_delete_object_desc(obj_desc);
return_ACPI_STATUS(AE_NO_MEMORY);
}
obj_desc->buffer.flags |= AOPOBJ_DATA_VALID;
- op->common.node = (struct acpi_namespace_node *)obj_desc;
+ op->common.node = ACPI_CAST_PTR(struct acpi_namespace_node, obj_desc);
return_ACPI_STATUS(AE_OK);
}
*
* PARAMETERS: walk_state - Current walk state
* Op - Parser object to be translated
- * package_length - Number of elements in the package
+ * element_count - Number of elements in the package - this is
+ * the num_elements argument to Package()
* obj_desc_ptr - Where the ACPI internal object is returned
*
* RETURN: Status
* DESCRIPTION: Translate a parser Op package object to the equivalent
* namespace object
*
+ * NOTE: The number of elements in the package will be always be the num_elements
+ * count, regardless of the number of elements in the package list. If
+ * num_elements is smaller, only that many package list elements are used.
+ * if num_elements is larger, the Package object is padded out with
+ * objects of type Uninitialized (as per ACPI spec.)
+ *
+ * Even though the ASL compilers do not allow num_elements to be smaller
+ * than the Package list length (for the fixed length package opcode), some
+ * BIOS code modifies the AML on the fly to adjust the num_elements, and
+ * this code compensates for that. This also provides compatibility with
+ * other AML interpreters.
+ *
******************************************************************************/
acpi_status
acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
union acpi_parse_object *op,
- u32 package_length,
+ u32 element_count,
union acpi_operand_object **obj_desc_ptr)
{
union acpi_parse_object *arg;
union acpi_parse_object *parent;
union acpi_operand_object *obj_desc = NULL;
- u32 package_list_length;
acpi_status status = AE_OK;
- u32 i;
+ acpi_native_uint i;
- ACPI_FUNCTION_TRACE("ds_build_internal_package_obj");
+ ACPI_FUNCTION_TRACE(ds_build_internal_package_obj);
/* Find the parent of a possibly nested package */
parent = parent->common.parent;
}
+ /*
+ * If we are evaluating a Named package object "Name (xxxx, Package)",
+ * the package object already exists, otherwise it must be created.
+ */
obj_desc = *obj_desc_ptr;
- if (obj_desc) {
- /*
- * We are evaluating a Named package object "Name (xxxx, Package)".
- * Get the existing package object from the NS node
- */
- } else {
+ if (!obj_desc) {
obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_PACKAGE);
*obj_desc_ptr = obj_desc;
if (!obj_desc) {
obj_desc->package.node = parent->common.node;
}
- obj_desc->package.count = package_length;
-
- /* Count the number of items in the package list */
-
- package_list_length = 0;
- arg = op->common.value.arg;
- arg = arg->common.next;
- while (arg) {
- package_list_length++;
- arg = arg->common.next;
- }
-
/*
- * The package length (number of elements) will be the greater
- * of the specified length and the length of the initializer list
+ * Allocate the element array (array of pointers to the individual
+ * objects) based on the num_elements parameter. Add an extra pointer slot
+ * so that the list is always null terminated.
*/
- if (package_list_length > package_length) {
- obj_desc->package.count = package_list_length;
- }
-
- /*
- * Allocate the pointer array (array of pointers to the
- * individual objects). Add an extra pointer slot so
- * that the list is always null terminated.
- */
- obj_desc->package.elements = ACPI_MEM_CALLOCATE(((acpi_size) obj_desc->
- package.count +
- 1) * sizeof(void *));
+ obj_desc->package.elements = ACPI_ALLOCATE_ZEROED(((acpi_size)
+ element_count +
+ 1) * sizeof(void *));
if (!obj_desc->package.elements) {
acpi_ut_delete_object_desc(obj_desc);
return_ACPI_STATUS(AE_NO_MEMORY);
}
+ obj_desc->package.count = element_count;
+
/*
- * Now init the elements of the package
+ * Initialize the elements of the package, up to the num_elements count.
+ * Package is automatically padded with uninitialized (NULL) elements
+ * if num_elements is greater than the package list length. Likewise,
+ * Package is truncated if num_elements is less than the list length.
*/
- i = 0;
arg = op->common.value.arg;
arg = arg->common.next;
- while (arg) {
+ for (i = 0; arg && (i < element_count); i++) {
if (arg->common.aml_opcode == AML_INT_RETURN_VALUE_OP) {
- /* Object (package or buffer) is already built */
-
- obj_desc->package.elements[i] =
- ACPI_CAST_PTR(union acpi_operand_object,
- arg->common.node);
+ if (arg->common.node->type == ACPI_TYPE_METHOD) {
+ /*
+ * A method reference "looks" to the parser to be a method
+ * invocation, so we special case it here
+ */
+ arg->common.aml_opcode = AML_INT_NAMEPATH_OP;
+ status =
+ acpi_ds_build_internal_object(walk_state,
+ arg,
+ &obj_desc->
+ package.
+ elements[i]);
+ } else {
+ /* This package element is already built, just get it */
+
+ obj_desc->package.elements[i] =
+ ACPI_CAST_PTR(union acpi_operand_object,
+ arg->common.node);
+ }
} else {
status = acpi_ds_build_internal_object(walk_state, arg,
&obj_desc->
package.
elements[i]);
}
-
- i++;
arg = arg->common.next;
}
+ if (!arg) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Package List length larger than NumElements count (%X), truncated\n",
+ element_count));
+ }
+
obj_desc->package.flags |= AOPOBJ_DATA_VALID;
- op->common.node = (struct acpi_namespace_node *)obj_desc;
+ op->common.node = ACPI_CAST_PTR(struct acpi_namespace_node, obj_desc);
return_ACPI_STATUS(status);
}
acpi_status status;
union acpi_operand_object *obj_desc;
- ACPI_FUNCTION_TRACE_PTR("ds_create_node", op);
+ ACPI_FUNCTION_TRACE_PTR(ds_create_node, op);
/*
* Because of the execution pass through the non-control-method
}
if (!op->common.value.arg) {
+
/* No arguments, there is nothing to do */
return_ACPI_STATUS(AE_OK);
union acpi_operand_object *obj_desc;
acpi_status status = AE_OK;
- ACPI_FUNCTION_TRACE("ds_init_object_from_op");
+ ACPI_FUNCTION_TRACE(ds_init_object_from_op);
obj_desc = *ret_obj_desc;
op_info = acpi_ps_get_opcode_info(opcode);
if (op_info->class == AML_CLASS_UNKNOWN) {
+
/* Unknown opcode */
return_ACPI_STATUS(AE_TYPE);
/*
* Defer evaluation of Buffer term_arg operand
*/
- obj_desc->buffer.node = (struct acpi_namespace_node *)
- walk_state->operands[0];
+ obj_desc->buffer.node =
+ ACPI_CAST_PTR(struct acpi_namespace_node,
+ walk_state->operands[0]);
obj_desc->buffer.aml_start = op->named.data;
obj_desc->buffer.aml_length = op->named.length;
break;
/*
* Defer evaluation of Package term_arg operand
*/
- obj_desc->package.node = (struct acpi_namespace_node *)
- walk_state->operands[0];
+ obj_desc->package.node =
+ ACPI_CAST_PTR(struct acpi_namespace_node,
+ walk_state->operands[0]);
obj_desc->package.aml_start = op->named.data;
obj_desc->package.aml_length = op->named.length;
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unknown constant opcode %X\n",
- opcode));
+ ACPI_ERROR((AE_INFO,
+ "Unknown constant opcode %X",
+ opcode));
status = AE_AML_OPERAND_TYPE;
break;
}
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unknown Integer type %X\n",
- op_info->type));
+ ACPI_ERROR((AE_INFO, "Unknown Integer type %X",
+ op_info->type));
status = AE_AML_OPERAND_TYPE;
break;
}
default: /* Other literals, etc.. */
if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
+
/* Node was saved in Op */
obj_desc->reference.node = op->common.node;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unimplemented data type: %X\n",
- ACPI_GET_OBJECT_TYPE(obj_desc)));
+ ACPI_ERROR((AE_INFO, "Unimplemented data type: %X",
+ ACPI_GET_OBJECT_TYPE(obj_desc)));
status = AE_AML_OPERAND_TYPE;
break;
projects / linux-2.6-omap-h63xx.git / blobdiff