u16 heads, u16 sectors);
static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
static void ata_dev_xfermask(struct ata_device *dev);
+static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
unsigned int ata_print_id = 1;
static struct workqueue_struct *ata_wq;
/**
* ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
* @tf: Taskfile to convert
- * @fis: Buffer into which data will output
* @pmp: Port multiplier port
+ * @is_cmd: This FIS is for command
+ * @fis: Buffer into which data will output
*
* Converts a standard ATA taskfile to a Serial ATA
* FIS structure (Register - Host to Device).
* LOCKING:
* Inherited from caller.
*/
-
-void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp)
+void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis)
{
- fis[0] = 0x27; /* Register - Host to Device FIS */
- fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number,
- bit 7 indicates Command FIS */
+ fis[0] = 0x27; /* Register - Host to Device FIS */
+ fis[1] = pmp & 0xf; /* Port multiplier number*/
+ if (is_cmd)
+ fis[1] |= (1 << 7); /* bit 7 indicates Command FIS */
+
fis[2] = tf->command;
fis[3] = tf->feature;
desc[0] = '\0';
return;
}
- if (ata_device_blacklisted(dev) & ATA_HORKAGE_NONCQ) {
+ if (dev->horkage & ATA_HORKAGE_NONCQ) {
snprintf(desc, desc_sz, "NCQ (not used)");
return;
}
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
+ /* set horkage */
+ dev->horkage |= ata_dev_blacklisted(dev);
+
/* let ACPI work its magic */
rc = ata_acpi_on_devcfg(dev);
if (rc)
dev->max_sectors = ATA_MAX_SECTORS;
}
- if (ata_device_blacklisted(dev) & ATA_HORKAGE_MAX_SEC_128)
+ if (dev->horkage & ATA_HORKAGE_MAX_SEC_128)
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
dev->max_sectors);
u32 sstatus, spd, mask;
int rc, highbit;
+ if (!sata_scr_valid(ap))
+ return -EOPNOTSUPP;
+
+ /* If SCR can be read, use it to determine the current SPD.
+ * If not, use cached value in ap->sata_spd.
+ */
rc = sata_scr_read(ap, SCR_STATUS, &sstatus);
- if (rc)
- return rc;
+ if (rc == 0)
+ spd = (sstatus >> 4) & 0xf;
+ else
+ spd = ap->sata_spd;
mask = ap->sata_spd_limit;
if (mask <= 1)
return -EINVAL;
+
+ /* unconditionally mask off the highest bit */
highbit = fls(mask) - 1;
mask &= ~(1 << highbit);
- spd = (sstatus >> 4) & 0xf;
- if (spd <= 1)
- return -EINVAL;
- spd--;
- mask &= (1 << spd) - 1;
+ /* Mask off all speeds higher than or equal to the current
+ * one. Force 1.5Gbps if current SPD is not available.
+ */
+ if (spd > 1)
+ mask &= (1 << (spd - 1)) - 1;
+ else
+ mask &= 1;
+
+ /* were we already at the bottom? */
if (!mask)
return -EINVAL;
if ((slave_possible) && (err != 0x81))
ap->device[1].class = ata_dev_try_classify(ap, 1, &err);
- /* re-enable interrupts */
- ap->ops->irq_on(ap);
-
/* is double-select really necessary? */
if (ap->device[1].class != ATA_DEV_NONE)
ap->ops->dev_select(ap, 1);
last = cur;
last_jiffies = jiffies;
- /* check deadline */
+ /* Check deadline. If debouncing failed, return
+ * -EPIPE to tell upper layer to lower link speed.
+ */
if (time_after(jiffies, deadline))
- return -EBUSY;
+ return -EPIPE;
}
}
if (sata_scr_read(ap, SCR_ERROR, &serror) == 0)
sata_scr_write(ap, SCR_ERROR, serror);
- /* re-enable interrupts */
- if (!ap->ops->error_handler)
- ap->ops->irq_on(ap);
-
/* is double-select really necessary? */
if (classes[0] != ATA_DEV_NONE)
ap->ops->dev_select(ap, 1);
{ "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA },
{ "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA },
{ "IOMEGA ZIP 250 ATAPI", NULL, ATA_HORKAGE_NODMA }, /* temporary fix */
+ { "IOMEGA ZIP 250 ATAPI Floppy",
+ NULL, ATA_HORKAGE_NODMA },
/* Weird ATAPI devices */
{ "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
{ "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ },
/* NCQ is broken */
{ "Maxtor 6L250S0", "BANC1G10", ATA_HORKAGE_NONCQ },
+ { "Maxtor 6B200M0", "BANC1BM0", ATA_HORKAGE_NONCQ },
{ "Maxtor 6B200M0", "BANC1B10", ATA_HORKAGE_NONCQ },
+ { "HITACHI HDS7250SASUN500G 0621KTAWSD", "K2AOAJ0AHITACHI",
+ ATA_HORKAGE_NONCQ },
/* NCQ hard hangs device under heavier load, needs hard power cycle */
{ "Maxtor 6B250S0", "BANC1B70", ATA_HORKAGE_NONCQ },
/* Blacklist entries taken from Silicon Image 3124/3132
{ "HTS541612J9SA00", "SBDIC7JP", ATA_HORKAGE_NONCQ, },
{ "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ, },
{ "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
+ { "FUJITSU MHV2080BH", "00840028", ATA_HORKAGE_NONCQ, },
+ { "ST9160821AS", "3.CLF", ATA_HORKAGE_NONCQ, },
/* Devices with NCQ limits */
{ }
};
-unsigned long ata_device_blacklisted(const struct ata_device *dev)
+static unsigned long ata_dev_blacklisted(const struct ata_device *dev)
{
unsigned char model_num[ATA_ID_PROD_LEN + 1];
unsigned char model_rev[ATA_ID_FW_REV_LEN + 1];
if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) &&
(dev->flags & ATA_DFLAG_CDB_INTR))
return 1;
- return (ata_device_blacklisted(dev) & ATA_HORKAGE_NODMA) ? 1 : 0;
+ return (dev->horkage & ATA_HORKAGE_NODMA) ? 1 : 0;
}
/**
*/
int sata_scr_read(struct ata_port *ap, int reg, u32 *val)
{
- if (sata_scr_valid(ap)) {
- *val = ap->ops->scr_read(ap, reg);
- return 0;
- }
+ if (sata_scr_valid(ap))
+ return ap->ops->scr_read(ap, reg, val);
return -EOPNOTSUPP;
}
*/
int sata_scr_write(struct ata_port *ap, int reg, u32 val)
{
- if (sata_scr_valid(ap)) {
- ap->ops->scr_write(ap, reg, val);
- return 0;
- }
+ if (sata_scr_valid(ap))
+ return ap->ops->scr_write(ap, reg, val);
return -EOPNOTSUPP;
}
*/
int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val)
{
+ int rc;
+
if (sata_scr_valid(ap)) {
- ap->ops->scr_write(ap, reg, val);
- ap->ops->scr_read(ap, reg);
- return 0;
+ rc = ap->ops->scr_write(ap, reg, val);
+ if (rc == 0)
+ rc = ap->ops->scr_read(ap, reg, &val);
+ return rc;
}
return -EOPNOTSUPP;
}
/* SATA spd limit is bound to the first device */
ap->sata_spd_limit = ap->hw_sata_spd_limit;
+ ap->sata_spd = 0;
/* High bits of dev->flags are used to record warm plug
* requests which occur asynchronously. Synchronize using
INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
INIT_LIST_HEAD(&ap->eh_done_q);
init_waitqueue_head(&ap->eh_wait_q);
+ init_timer_deferrable(&ap->fastdrain_timer);
+ ap->fastdrain_timer.function = ata_eh_fastdrain_timerfn;
+ ap->fastdrain_timer.data = (unsigned long)ap;
ap->cbl = ATA_CBL_NONE;
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
- ata_scsi_scan_host(ap);
+ ata_scsi_scan_host(ap, 1);
}
return 0;
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
EXPORT_SYMBOL_GPL(ata_id_to_dma_mode);
-EXPORT_SYMBOL_GPL(ata_device_blacklisted);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(pci_test_config_bits);
-EXPORT_SYMBOL_GPL(ata_pci_init_native_host);
+EXPORT_SYMBOL_GPL(ata_pci_init_sff_host);
EXPORT_SYMBOL_GPL(ata_pci_init_bmdma);
-EXPORT_SYMBOL_GPL(ata_pci_prepare_native_host);
+EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host);
EXPORT_SYMBOL_GPL(ata_pci_init_one);
EXPORT_SYMBOL_GPL(ata_pci_remove_one);
#ifdef CONFIG_PM
EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
#endif /* CONFIG_PCI */
+EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
+EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
+EXPORT_SYMBOL_GPL(ata_ehi_clear_desc);
EXPORT_SYMBOL_GPL(ata_eng_timeout);
EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
EXPORT_SYMBOL_GPL(ata_port_abort);