#include <linux/libata.h>
#include "libata.h"
+const struct ata_port_operations sata_pmp_port_ops = {
+ .inherits = &sata_port_ops,
+ .pmp_prereset = ata_std_prereset,
+ .pmp_hardreset = sata_std_hardreset,
+ .pmp_postreset = ata_std_postreset,
+ .error_handler = sata_pmp_error_handler,
+};
+
/**
* sata_pmp_read - read PMP register
* @link: link to read PMP register for
ata_tf_init(pmp_dev, &tf);
tf.command = ATA_CMD_PMP_READ;
tf.protocol = ATA_PROT_NODATA;
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48;
tf.feature = reg;
tf.device = link->pmp;
ata_tf_init(pmp_dev, &tf);
tf.command = ATA_CMD_PMP_WRITE;
tf.protocol = ATA_PROT_NODATA;
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48;
tf.feature = reg;
tf.device = link->pmp;
tf.nsect = val & 0xff;
return 0;
}
-/**
- * sata_pmp_std_prereset - prepare PMP link for reset
- * @link: link to be reset
- * @deadline: deadline jiffies for the operation
- *
- * @link is about to be reset. Initialize it.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
- */
-int sata_pmp_std_prereset(struct ata_link *link, unsigned long deadline)
-{
- struct ata_eh_context *ehc = &link->eh_context;
- const unsigned long *timing = sata_ehc_deb_timing(ehc);
- int rc;
-
- /* force HRST? */
- if (link->flags & ATA_LFLAG_NO_SRST)
- ehc->i.action |= ATA_EH_HARDRESET;
-
- /* handle link resume */
- if ((ehc->i.flags & ATA_EHI_RESUME_LINK) &&
- (link->flags & ATA_LFLAG_HRST_TO_RESUME))
- ehc->i.action |= ATA_EH_HARDRESET;
-
- /* if we're about to do hardreset, nothing more to do */
- if (ehc->i.action & ATA_EH_HARDRESET)
- return 0;
-
- /* resume link */
- rc = sata_link_resume(link, timing, deadline);
- if (rc) {
- /* phy resume failed */
- ata_link_printk(link, KERN_WARNING, "failed to resume link "
- "for reset (errno=%d)\n", rc);
- return rc;
- }
-
- /* clear SError bits including .X which blocks the port when set */
- rc = sata_scr_write(link, SCR_ERROR, 0xffffffff);
- if (rc) {
- ata_link_printk(link, KERN_ERR,
- "failed to clear SError (errno=%d)\n", rc);
- return rc;
- }
-
- return 0;
-}
-
-/**
- * sata_pmp_std_hardreset - standard hardreset method for PMP link
- * @link: link to be reset
- * @class: resulting class of attached device
- * @deadline: deadline jiffies for the operation
- *
- * Hardreset PMP port @link. Note that this function doesn't
- * wait for BSY clearance. There simply isn't a generic way to
- * wait the event. Instead, this function return -EAGAIN thus
- * telling libata-EH to followup with softreset.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
- */
-int sata_pmp_std_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
- u32 tmp;
- int rc;
-
- DPRINTK("ENTER\n");
-
- /* do hardreset */
- rc = sata_link_hardreset(link, timing, deadline);
- if (rc) {
- ata_link_printk(link, KERN_ERR,
- "COMRESET failed (errno=%d)\n", rc);
- goto out;
- }
-
- /* clear SError bits including .X which blocks the port when set */
- rc = sata_scr_write(link, SCR_ERROR, 0xffffffff);
- if (rc) {
- ata_link_printk(link, KERN_ERR, "failed to clear SError "
- "during hardreset (errno=%d)\n", rc);
- goto out;
- }
-
- /* if device is present, follow up with srst to wait for !BSY */
- if (ata_link_online(link))
- rc = -EAGAIN;
- out:
- /* if SCR isn't accessible, we need to reset the PMP */
- if (rc && rc != -EAGAIN && sata_scr_read(link, SCR_STATUS, &tmp))
- rc = -ERESTART;
-
- DPRINTK("EXIT, rc=%d\n", rc);
- return rc;
-}
-
-/**
- * ata_std_postreset - standard postreset method for PMP link
- * @link: the target ata_link
- * @classes: classes of attached devices
- *
- * This function is invoked after a successful reset. Note that
- * the device might have been reset more than once using
- * different reset methods before postreset is invoked.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- */
-void sata_pmp_std_postreset(struct ata_link *link, unsigned int *class)
-{
- u32 serror;
-
- DPRINTK("ENTER\n");
-
- /* clear SError */
- if (sata_scr_read(link, SCR_ERROR, &serror) == 0)
- sata_scr_write(link, SCR_ERROR, serror);
-
- /* print link status */
- sata_print_link_status(link);
-
- DPRINTK("EXIT\n");
-}
-
/**
* sata_pmp_read_gscr - read GSCR block of SATA PMP
* @dev: PMP device
struct ata_eh_context *ehc = &link->eh_context;
link->flags = 0;
- ehc->i.probe_mask |= 1;
- ehc->i.action |= ATA_EH_SOFTRESET;
- ehc->i.flags |= ATA_EHI_RESUME_LINK;
+ ehc->i.probe_mask |= ATA_ALL_DEVICES;
+ ehc->i.action |= ATA_EH_RESET;
}
return 0;
if (vendor == 0x1095 && devid == 0x3726) {
/* sil3726 quirks */
ata_port_for_each_link(link, ap) {
- /* SError.N need a kick in the ass to get working */
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
-
/* class code report is unreliable */
if (link->pmp < 5)
link->flags |= ATA_LFLAG_ASSUME_ATA;
} else if (vendor == 0x1095 && devid == 0x4723) {
/* sil4723 quirks */
ata_port_for_each_link(link, ap) {
- /* SError.N need a kick in the ass to get working */
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
-
/* class code report is unreliable */
if (link->pmp < 2)
link->flags |= ATA_LFLAG_ASSUME_ATA;
} else if (vendor == 0x1095 && devid == 0x4726) {
/* sil4726 quirks */
ata_port_for_each_link(link, ap) {
- /* SError.N need a kick in the ass to get working */
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
-
- /* class code report is unreliable */
- if (link->pmp < 5)
- link->flags |= ATA_LFLAG_ASSUME_ATA;
-
- /* The config device, which can be either at
- * port 0 or 5, locks up on SRST.
+ /* Class code report is unreliable and SRST
+ * times out under certain configurations.
+ * Config device can be at port 0 or 5 and
+ * locks up on SRST.
*/
- if (link->pmp == 0 || link->pmp == 5)
+ if (link->pmp <= 5)
link->flags |= ATA_LFLAG_NO_SRST |
ATA_LFLAG_ASSUME_ATA;
* otherwise. Don't try hard to recover it.
*/
ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY;
- } else if (vendor == 0x11ab && devid == 0x4140) {
- /* Marvell 88SM4140 quirks. Fan-out ports require PHY
- * reset to work; other than that, it behaves very
- * nicely.
- */
- ata_port_for_each_link(link, ap)
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
}
}
int rc;
/* is it hanging off the right place? */
- if (!(ap->flags & ATA_FLAG_PMP)) {
+ if (!sata_pmp_supported(ap)) {
ata_dev_printk(dev, KERN_ERR,
"host does not support Port Multiplier\n");
return -EINVAL;
retry:
ehc->classes[0] = ATA_DEV_UNKNOWN;
- if (ehc->i.action & ATA_EH_RESET_MASK) {
+ if (ehc->i.action & ATA_EH_RESET) {
struct ata_link *tlink;
ata_eh_freeze_port(ap);
/* reset */
- ehc->i.action = ATA_EH_HARDRESET;
rc = ata_eh_reset(link, 0, prereset, softreset, hardreset,
postreset);
if (rc) {
ata_eh_thaw_port(ap);
/* PMP is reset, SErrors cannot be trusted, scan all */
- ata_port_for_each_link(tlink, ap)
- ata_ehi_schedule_probe(&tlink->eh_context.i);
+ ata_port_for_each_link(tlink, ap) {
+ struct ata_eh_context *ehc = &tlink->eh_context;
+
+ ehc->i.probe_mask |= ATA_ALL_DEVICES;
+ ehc->i.action |= ATA_EH_RESET;
+ }
}
/* If revalidation is requested, revalidate and reconfigure;
tries--;
if (rc == -ENODEV) {
- ehc->i.probe_mask |= 1;
+ ehc->i.probe_mask |= ATA_ALL_DEVICES;
detach = 1;
/* give it just two more chances */
tries = min(tries, 2);
reval_failed = 1;
ata_dev_printk(dev, KERN_WARNING,
- "retrying hardreset%s\n",
+ "retrying reset%s\n",
sleep ? " in 5 secs" : "");
if (sleep)
ssleep(5);
- ehc->i.action |= ATA_EH_HARDRESET;
+ ehc->i.action |= ATA_EH_RESET;
goto retry;
} else {
ata_dev_printk(dev, KERN_ERR, "failed to recover PMP "
/* Some PMPs require hardreset sequence to get
* SError.N working.
*/
- if ((link->flags & ATA_LFLAG_HRST_TO_RESUME) &&
- (link->eh_context.i.flags & ATA_EHI_RESUME_LINK))
- sata_link_hardreset(link, sata_deb_timing_normal,
- jiffies + ATA_TMOUT_INTERNAL_QUICK);
+ sata_link_hardreset(link, sata_deb_timing_normal,
+ jiffies + ATA_TMOUT_INTERNAL_QUICK, NULL, NULL);
/* unconditionally clear SError.N */
rc = sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
/**
* sata_pmp_eh_recover - recover PMP-enabled port
* @ap: ATA port to recover
- * @prereset: prereset method (can be NULL)
- * @softreset: softreset method
- * @hardreset: hardreset method
- * @postreset: postreset method (can be NULL)
- * @pmp_prereset: PMP prereset method (can be NULL)
- * @pmp_softreset: PMP softreset method (can be NULL)
- * @pmp_hardreset: PMP hardreset method (can be NULL)
- * @pmp_postreset: PMP postreset method (can be NULL)
*
* Drive EH recovery operation for PMP enabled port @ap. This
* function recovers host and PMP ports with proper retrials and
* RETURNS:
* 0 on success, -errno on failure.
*/
-static int sata_pmp_eh_recover(struct ata_port *ap,
- ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
- ata_reset_fn_t hardreset, ata_postreset_fn_t postreset,
- ata_prereset_fn_t pmp_prereset, ata_reset_fn_t pmp_softreset,
- ata_reset_fn_t pmp_hardreset, ata_postreset_fn_t pmp_postreset)
+static int sata_pmp_eh_recover(struct ata_port *ap)
{
+ struct ata_port_operations *ops = ap->ops;
int pmp_tries, link_tries[SATA_PMP_MAX_PORTS];
struct ata_link *pmp_link = &ap->link;
struct ata_device *pmp_dev = pmp_link->device;
retry:
/* PMP attached? */
- if (!ap->nr_pmp_links) {
- rc = ata_eh_recover(ap, prereset, softreset, hardreset,
- postreset, NULL);
+ if (!sata_pmp_attached(ap)) {
+ rc = ata_eh_recover(ap, ops->prereset, ops->softreset,
+ ops->hardreset, ops->postreset, NULL);
if (rc) {
ata_link_for_each_dev(dev, &ap->link)
ata_dev_disable(dev);
}
/* recover pmp */
- rc = sata_pmp_eh_recover_pmp(ap, prereset, softreset, hardreset,
- postreset);
+ rc = sata_pmp_eh_recover_pmp(ap, ops->prereset, ops->softreset,
+ ops->hardreset, ops->postreset);
if (rc)
goto pmp_fail;
goto pmp_fail;
/* recover links */
- rc = ata_eh_recover(ap, pmp_prereset, pmp_softreset, pmp_hardreset,
- pmp_postreset, &link);
+ rc = ata_eh_recover(ap, ops->pmp_prereset, ops->pmp_softreset,
+ ops->pmp_hardreset, ops->pmp_postreset, &link);
if (rc)
goto link_fail;
link_fail:
if (sata_pmp_handle_link_fail(link, link_tries)) {
- pmp_ehc->i.action |= ATA_EH_HARDRESET;
+ pmp_ehc->i.action |= ATA_EH_RESET;
goto retry;
}
if (ap->pflags & ATA_PFLAG_UNLOADING)
return rc;
- if (!ap->nr_pmp_links)
+ if (!sata_pmp_attached(ap))
goto retry;
if (--pmp_tries) {
ata_port_printk(ap, KERN_WARNING,
"failed to recover PMP, retrying in 5 secs\n");
- pmp_ehc->i.action |= ATA_EH_HARDRESET;
+ pmp_ehc->i.action |= ATA_EH_RESET;
ssleep(5);
goto retry;
}
}
/**
- * sata_pmp_do_eh - do standard error handling for PMP-enabled host
+ * sata_pmp_error_handler - do standard error handling for PMP-enabled host
* @ap: host port to handle error for
- * @prereset: prereset method (can be NULL)
- * @softreset: softreset method
- * @hardreset: hardreset method
- * @postreset: postreset method (can be NULL)
- * @pmp_prereset: PMP prereset method (can be NULL)
- * @pmp_softreset: PMP softreset method (can be NULL)
- * @pmp_hardreset: PMP hardreset method (can be NULL)
- * @pmp_postreset: PMP postreset method (can be NULL)
*
* Perform standard error handling sequence for PMP-enabled host
* @ap.
* LOCKING:
* Kernel thread context (may sleep).
*/
-void sata_pmp_do_eh(struct ata_port *ap,
- ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
- ata_reset_fn_t hardreset, ata_postreset_fn_t postreset,
- ata_prereset_fn_t pmp_prereset, ata_reset_fn_t pmp_softreset,
- ata_reset_fn_t pmp_hardreset, ata_postreset_fn_t pmp_postreset)
+void sata_pmp_error_handler(struct ata_port *ap)
{
ata_eh_autopsy(ap);
ata_eh_report(ap);
- sata_pmp_eh_recover(ap, prereset, softreset, hardreset, postreset,
- pmp_prereset, pmp_softreset, pmp_hardreset,
- pmp_postreset);
+ sata_pmp_eh_recover(ap);
ata_eh_finish(ap);
}
+
+EXPORT_SYMBOL_GPL(sata_pmp_port_ops);
+EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch);
+EXPORT_SYMBOL_GPL(sata_pmp_error_handler);
projects / linux-2.6-omap-h63xx.git / blobdiff