}
/*
- * ata_gen_ata_desc_sense - Generate check condition sense block.
+ * ata_gen_passthru_sense - Generate check condition sense block.
* @qc: Command that completed.
*
* This function is specific to the ATA descriptor format sense
* block. Clear sense key, ASC & ASCQ if there is no error.
*
* LOCKING:
- * spin_lock_irqsave(host lock)
+ * None.
*/
-void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
+static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
{
struct scsi_cmnd *cmd = qc->scsicmd;
struct ata_taskfile *tf = &qc->result_tf;
desc[0] = 0x09;
- /*
- * Set length of additional sense data.
- * Since we only populate descriptor 0, the total
- * length is the same (fixed) length as descriptor 0.
- */
- desc[1] = sb[7] = 14;
+ /* set length of additional sense data */
+ sb[7] = 14;
+ desc[1] = 12;
/*
* Copy registers into sense buffer.
}
/**
- * ata_gen_fixed_sense - generate a SCSI fixed sense block
+ * ata_gen_ata_sense - generate a SCSI fixed sense block
* @qc: Command that we are erroring out
*
- * Leverage ata_to_sense_error() to give us the codes. Fit our
- * LBA in here if there's room.
+ * Generate sense block for a failed ATA command @qc. Descriptor
+ * format is used to accomodate LBA48 block address.
*
* LOCKING:
- * inherited from caller
+ * None.
*/
-void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
+static void ata_gen_ata_sense(struct ata_queued_cmd *qc)
{
+ struct ata_device *dev = qc->dev;
struct scsi_cmnd *cmd = qc->scsicmd;
struct ata_taskfile *tf = &qc->result_tf;
unsigned char *sb = cmd->sense_buffer;
+ unsigned char *desc = sb + 8;
int verbose = qc->ap->ops->error_handler == NULL;
+ u64 block;
memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
- /*
- * Use ata_to_sense_error() to map status register bits
+ /* sense data is current and format is descriptor */
+ sb[0] = 0x72;
+
+ /* Use ata_to_sense_error() to map status register bits
* onto sense key, asc & ascq.
*/
if (qc->err_mask ||
tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
- &sb[2], &sb[12], &sb[13], verbose);
- sb[2] &= 0x0f;
+ &sb[1], &sb[2], &sb[3], verbose);
+ sb[1] &= 0x0f;
}
- sb[0] = 0x70;
- sb[7] = 0x0a;
-
- if (tf->flags & ATA_TFLAG_LBA48) {
- /* TODO: find solution for LBA48 descriptors */
- }
+ block = ata_tf_read_block(&qc->result_tf, dev);
- else if (tf->flags & ATA_TFLAG_LBA) {
- /* A small (28b) LBA will fit in the 32b info field */
- sb[0] |= 0x80; /* set valid bit */
- sb[3] = tf->device & 0x0f;
- sb[4] = tf->lbah;
- sb[5] = tf->lbam;
- sb[6] = tf->lbal;
- }
+ /* information sense data descriptor */
+ sb[7] = 12;
+ desc[0] = 0x00;
+ desc[1] = 10;
- else {
- /* TODO: C/H/S */
- }
+ desc[2] |= 0x80; /* valid */
+ desc[6] = block >> 40;
+ desc[7] = block >> 32;
+ desc[8] = block >> 24;
+ desc[9] = block >> 16;
+ desc[10] = block >> 8;
+ desc[11] = block;
}
static void ata_scsi_sdev_config(struct scsi_device *sdev)
static void ata_scsi_dev_config(struct scsi_device *sdev,
struct ata_device *dev)
{
- unsigned int max_sectors;
-
- /* TODO: 2048 is an arbitrary number, not the
- * hardware maximum. This should be increased to
- * 65534 when Jens Axboe's patch for dynamically
- * determining max_sectors is merged.
- */
- max_sectors = ATA_MAX_SECTORS;
- if (dev->flags & ATA_DFLAG_LBA48)
- max_sectors = ATA_MAX_SECTORS_LBA48;
- if (dev->max_sectors)
- max_sectors = dev->max_sectors;
-
- blk_queue_max_sectors(sdev->request_queue, max_sectors);
+ /* configure max sectors */
+ blk_queue_max_sectors(sdev->request_queue, dev->max_sectors);
- /*
- * SATA DMA transfers must be multiples of 4 byte, so
+ /* SATA DMA transfers must be multiples of 4 byte, so
* we need to pad ATAPI transfers using an extra sg.
* Decrement max hw segments accordingly.
*/
tf->flags |= ATA_TFLAG_DEVICE;
tf->protocol = ATA_PROT_NODATA;
- if ((qc->dev->flags & ATA_DFLAG_LBA48) &&
- (ata_id_has_flush_ext(qc->dev->id)))
+ if (qc->dev->flags & ATA_DFLAG_FLUSH_EXT)
tf->command = ATA_CMD_FLUSH_EXT;
else
tf->command = ATA_CMD_FLUSH;
*/
if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) &&
((cdb[2] & 0x20) || need_sense)) {
- ata_gen_ata_desc_sense(qc);
+ ata_gen_passthru_sense(qc);
} else {
if (!need_sense) {
cmd->result = SAM_STAT_GOOD;
* good for smaller LBA (and maybe CHS?)
* devices.
*/
- ata_gen_fixed_sense(qc);
+ ata_gen_ata_sense(qc);
}
}
args->done(cmd);
}
+/**
+ * ATA_SCSI_RBUF_SET - helper to set values in SCSI response buffer
+ * @idx: byte index into SCSI response buffer
+ * @val: value to set
+ *
+ * To be used by SCSI command simulator functions. This macros
+ * expects two local variables, u8 *rbuf and unsigned int buflen,
+ * are in scope.
+ *
+ * LOCKING:
+ * None.
+ */
+#define ATA_SCSI_RBUF_SET(idx, val) do { \
+ if ((idx) < buflen) rbuf[(idx)] = (u8)(val); \
+ } while (0)
+
/**
* ata_scsiop_inq_std - Simulate INQUIRY command
* @args: device IDENTIFY data / SCSI command of interest.
* Simulate READ CAPACITY commands.
*
* LOCKING:
- * spin_lock_irqsave(host lock)
+ * None.
*/
-
unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen)
{
- u64 n_sectors;
- u32 tmp;
+ u64 last_lba = args->dev->n_sectors - 1; /* LBA of the last block */
VPRINTK("ENTER\n");
- if (ata_id_has_lba(args->id)) {
- if (ata_id_has_lba48(args->id))
- n_sectors = ata_id_u64(args->id, 100);
- else
- n_sectors = ata_id_u32(args->id, 60);
- } else {
- /* CHS default translation */
- n_sectors = args->id[1] * args->id[3] * args->id[6];
-
- if (ata_id_current_chs_valid(args->id))
- /* CHS current translation */
- n_sectors = ata_id_u32(args->id, 57);
- }
-
- n_sectors--; /* ATA TotalUserSectors - 1 */
-
if (args->cmd->cmnd[0] == READ_CAPACITY) {
- if( n_sectors >= 0xffffffffULL )
- tmp = 0xffffffff ; /* Return max count on overflow */
- else
- tmp = n_sectors ;
+ if (last_lba >= 0xffffffffULL)
+ last_lba = 0xffffffff;
/* sector count, 32-bit */
- rbuf[0] = tmp >> (8 * 3);
- rbuf[1] = tmp >> (8 * 2);
- rbuf[2] = tmp >> (8 * 1);
- rbuf[3] = tmp;
+ ATA_SCSI_RBUF_SET(0, last_lba >> (8 * 3));
+ ATA_SCSI_RBUF_SET(1, last_lba >> (8 * 2));
+ ATA_SCSI_RBUF_SET(2, last_lba >> (8 * 1));
+ ATA_SCSI_RBUF_SET(3, last_lba);
/* sector size */
- tmp = ATA_SECT_SIZE;
- rbuf[6] = tmp >> 8;
- rbuf[7] = tmp;
-
+ ATA_SCSI_RBUF_SET(6, ATA_SECT_SIZE >> 8);
+ ATA_SCSI_RBUF_SET(7, ATA_SECT_SIZE);
} else {
/* sector count, 64-bit */
- tmp = n_sectors >> (8 * 4);
- rbuf[2] = tmp >> (8 * 3);
- rbuf[3] = tmp >> (8 * 2);
- rbuf[4] = tmp >> (8 * 1);
- rbuf[5] = tmp;
- tmp = n_sectors;
- rbuf[6] = tmp >> (8 * 3);
- rbuf[7] = tmp >> (8 * 2);
- rbuf[8] = tmp >> (8 * 1);
- rbuf[9] = tmp;
+ ATA_SCSI_RBUF_SET(0, last_lba >> (8 * 7));
+ ATA_SCSI_RBUF_SET(1, last_lba >> (8 * 6));
+ ATA_SCSI_RBUF_SET(2, last_lba >> (8 * 5));
+ ATA_SCSI_RBUF_SET(3, last_lba >> (8 * 4));
+ ATA_SCSI_RBUF_SET(4, last_lba >> (8 * 3));
+ ATA_SCSI_RBUF_SET(5, last_lba >> (8 * 2));
+ ATA_SCSI_RBUF_SET(6, last_lba >> (8 * 1));
+ ATA_SCSI_RBUF_SET(7, last_lba);
/* sector size */
- tmp = ATA_SECT_SIZE;
- rbuf[12] = tmp >> 8;
- rbuf[13] = tmp;
+ ATA_SCSI_RBUF_SET(10, ATA_SECT_SIZE >> 8);
+ ATA_SCSI_RBUF_SET(11, ATA_SECT_SIZE);
}
return 0;
* a sense descriptors, since that's only
* correct for ATA, not ATAPI
*/
- ata_gen_ata_desc_sense(qc);
+ ata_gen_passthru_sense(qc);
}
qc->scsidone(qc->scsicmd);
* sense descriptors, since that's only
* correct for ATA, not ATAPI
*/
- ata_gen_ata_desc_sense(qc);
+ ata_gen_passthru_sense(qc);
}
/* SCSI EH automatically locks door if sdev->locked is
* a sense descriptors, since that's only
* correct for ATA, not ATAPI
*/
- ata_gen_ata_desc_sense(qc);
+ ata_gen_passthru_sense(qc);
} else {
u8 *scsicmd = cmd->cmnd;
rc = -EINVAL;
}
- if (rc == 0)
+ if (rc == 0) {
ata_port_schedule_eh(ap);
-
- spin_unlock_irqrestore(ap->lock, flags);
+ spin_unlock_irqrestore(ap->lock, flags);
+ ata_port_wait_eh(ap);
+ } else
+ spin_unlock_irqrestore(ap->lock, flags);
return rc;
}