return qc;
}
+static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+
+ qc->extrabytes = scmd->request->extra_len;
+ qc->nbytes = scsi_bufflen(scmd) + qc->extrabytes;
+}
+
/**
* ata_dump_status - user friendly display of error info
* @id: id of the port in question
struct request_queue *q = sdev->request_queue;
void *buf;
- /* set the min alignment */
+ /* set the min alignment and padding */
blk_queue_update_dma_alignment(sdev->request_queue,
ATA_DMA_PAD_SZ - 1);
+ blk_queue_dma_pad(sdev->request_queue, ATA_DMA_PAD_SZ - 1);
/* configure draining */
buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL);
u8 *rbuf;
unsigned int buflen, rc;
struct scsi_cmnd *cmd = args->cmd;
+ unsigned long flags;
+
+ local_irq_save(flags);
buflen = ata_scsi_rbuf_get(cmd, &rbuf);
memset(rbuf, 0, buflen);
rc = actor(args, rbuf, buflen);
ata_scsi_rbuf_put(cmd, rbuf);
+ local_irq_restore(flags);
+
if (rc == 0)
cmd->result = SAM_STAT_GOOD;
args->done(cmd);
if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) {
u8 *buf = NULL;
unsigned int buflen;
+ unsigned long flags;
+
+ local_irq_save(flags);
buflen = ata_scsi_rbuf_get(cmd, &buf);
}
ata_scsi_rbuf_put(cmd, buf);
+
+ local_irq_restore(flags);
}
cmd->result = SAM_STAT_GOOD;
}
qc->tf.command = ATA_CMD_PACKET;
- qc->nbytes = scsi_bufflen(scmd);
+ ata_qc_set_pc_nbytes(qc);
/* check whether ATAPI DMA is safe */
if (!using_pio && ata_check_atapi_dma(qc))
* want to set it properly, and for DMA where it is
* effectively meaningless.
*/
- nbytes = min(scmd->request->raw_data_len, (unsigned int)63 * 1024);
+ nbytes = min(ata_qc_raw_nbytes(qc), (unsigned int)63 * 1024);
/* Most ATAPI devices which honor transfer chunk size don't
* behave according to the spec when odd chunk size which
qc->tf.protocol = ATAPI_PROT_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
- if (atapi_dmadir && (scmd->sc_data_direction != DMA_TO_DEVICE))
+ if ((dev->flags & ATA_DFLAG_DMADIR) &&
+ (scmd->sc_data_direction != DMA_TO_DEVICE))
/* some SATA bridges need us to indicate data xfer direction */
qc->tf.feature |= ATAPI_DMADIR;
}
* TODO: find out if we need to do more here to
* cover scatter/gather case.
*/
- qc->nbytes = scsi_bufflen(scmd);
+ ata_qc_set_pc_nbytes(qc);
/* request result TF and be quiet about device error */
qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET;
ata_port_for_each_link(link, ap) {
struct ata_eh_info *ehi = &link->eh_info;
ehi->probe_mask |= (1 << ata_link_max_devices(link)) - 1;
- ehi->action |= ATA_EH_SOFTRESET;
+ ehi->action |= ATA_EH_RESET;
}
} else {
struct ata_device *dev = ata_find_dev(ap, devno);
if (dev) {
struct ata_eh_info *ehi = &dev->link->eh_info;
ehi->probe_mask |= 1 << dev->devno;
- ehi->action |= ATA_EH_SOFTRESET;
- ehi->flags |= ATA_EHI_RESUME_LINK;
+ ehi->action |= ATA_EH_RESET;
} else
rc = -EINVAL;
}