tty: add more tty_port fields

[linux-2.6-omap-h63xx.git] / drivers / ata / pata_amd.c

diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 33074c34105c5b85088ffa71e1014c647e56c526..57dd00f463d3367a33f24cf5f1808cc1c1f294ec 100644 (file)
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -84,32 +84,32 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse
 
        /* Configure the address set up timing */
        pci_read_config_byte(pdev, offset + 0x0C, &t);
-       t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(at.setup, 1, 4) - 1) << ((3 - dn) << 1));
+       t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(at.setup, 1, 4) - 1) << ((3 - dn) << 1));
        pci_write_config_byte(pdev, offset + 0x0C , t);
 
        /* Configure the 8bit I/O timing */
        pci_write_config_byte(pdev, offset + 0x0E + (1 - (dn >> 1)),
-               ((FIT(at.act8b, 1, 16) - 1) << 4) | (FIT(at.rec8b, 1, 16) - 1));
+               ((clamp_val(at.act8b, 1, 16) - 1) << 4) | (clamp_val(at.rec8b, 1, 16) - 1));
 
        /* Drive timing */
        pci_write_config_byte(pdev, offset + 0x08 + (3 - dn),
-               ((FIT(at.active, 1, 16) - 1) << 4) | (FIT(at.recover, 1, 16) - 1));
+               ((clamp_val(at.active, 1, 16) - 1) << 4) | (clamp_val(at.recover, 1, 16) - 1));
 
        switch (clock) {
                case 1:
-               t = at.udma ? (0xc0 | (FIT(at.udma, 2, 5) - 2)) : 0x03;
+               t = at.udma ? (0xc0 | (clamp_val(at.udma, 2, 5) - 2)) : 0x03;
                break;
 
                case 2:
-               t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 2, 10)]) : 0x03;
+               t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 2, 10)]) : 0x03;
                break;
 
                case 3:
-               t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 10)]) : 0x03;
+               t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 10)]) : 0x03;
                break;
 
                case 4:
-               t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 15)]) : 0x03;
+               t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 15)]) : 0x03;
                break;
 
                default:
@@ -143,7 +143,7 @@ static int amd_pre_reset(struct ata_link *link, unsigned long deadline)
        if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
                return -ENOENT;
 
-       return ata_std_prereset(link, deadline);
+       return ata_sff_prereset(link, deadline);
 }
 
 static int amd_cable_detect(struct ata_port *ap)
@@ -293,7 +293,7 @@ static int nv_pre_reset(struct ata_link *link, unsigned long deadline)
        if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no]))
                return -ENOENT;
 
-       return ata_std_prereset(link, deadline);
+       return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -503,7 +503,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
        ppi[0] = &info[type];
 
        if (type < 3)
-               ata_pci_clear_simplex(pdev);
+               ata_pci_bmdma_clear_simplex(pdev);
 
        /* Check for AMD7411 */
        if (type == 3)
@@ -523,7 +523,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
        }
 
        /* And fire it up */
-       return ata_pci_init_one(pdev, ppi, &amd_sht, hpriv);
+       return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv);
 }
 
 #ifdef CONFIG_PM
@@ -546,7 +546,7 @@ static int amd_reinit_one(struct pci_dev *pdev)
                        pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
                if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 ||
                    pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
-                       ata_pci_clear_simplex(pdev);
+                       ata_pci_bmdma_clear_simplex(pdev);
        }
 
        ata_host_resume(host);