libata: Switch most of the remaining SFF drivers to ata_sff_port_start

[linux-2.6-omap-h63xx.git] / drivers / ata / pata_cs5530.c

diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 848f0309bf038dcf0be656afbc8882dbea8da2aa..57e827e4109e939ac9e83561f8284bf19a0d6a9e 100644 (file)
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -35,7 +35,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME       "pata_cs5530"
-#define DRV_VERSION    "0.7.3"
+#define DRV_VERSION    "0.7.4"
 
 static void __iomem *cs5530_port_base(struct ata_port *ap)
 {
@@ -167,7 +167,7 @@ static struct scsi_host_template cs5530_sht = {
        .queuecommand           = ata_scsi_queuecmd,
        .can_queue              = ATA_DEF_QUEUE,
        .this_id                = ATA_SHT_THIS_ID,
-       .sg_tablesize           = LIBATA_MAX_PRD,
+       .sg_tablesize           = LIBATA_DUMB_MAX_PRD,
        .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
        .emulated               = ATA_SHT_EMULATED,
        .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -179,7 +179,6 @@ static struct scsi_host_template cs5530_sht = {
 };
 
 static struct ata_port_operations cs5530_port_ops = {
-       .port_disable   = ata_port_disable,
        .set_piomode    = cs5530_set_piomode,
        .set_dmamode    = cs5530_set_dmamode,
        .mode_filter    = ata_pci_default_filter,
@@ -201,7 +200,7 @@ static struct ata_port_operations cs5530_port_ops = {
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
        .cable_detect   = ata_cable_40wire,
 
-       .qc_prep        = ata_qc_prep,
+       .qc_prep        = ata_dumb_qc_prep,
        .qc_issue       = cs5530_qc_issue_prot,
 
        .data_xfer      = ata_data_xfer,
@@ -209,12 +208,11 @@ static struct ata_port_operations cs5530_port_ops = {
        .irq_handler    = ata_interrupt,
        .irq_clear      = ata_bmdma_irq_clear,
        .irq_on         = ata_irq_on,
-       .irq_ack        = ata_irq_ack,
 
-       .port_start     = ata_port_start,
+       .port_start     = ata_sff_port_start,
 };
 
-static struct dmi_system_id palmax_dmi_table[] = {
+static const struct dmi_system_id palmax_dmi_table[] = {
        {
                .ident = "Palmax PD1100",
                .matches = {
@@ -266,7 +264,7 @@ static int cs5530_init_chip(void)
        }
 
        pci_set_master(cs5530_0);
-       pci_set_mwi(cs5530_0);
+       pci_try_set_mwi(cs5530_0);
 
        /*
         * Set PCI CacheLineSize to 16-bytes:
@@ -337,7 +335,7 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
        static const struct ata_port_info info = {
                .sht = &cs5530_sht,
-               .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+               .flags = ATA_FLAG_SLAVE_POSS,
                .pio_mask = 0x1f,
                .mwdma_mask = 0x07,
                .udma_mask = 0x07,
@@ -346,7 +344,7 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
        /* The docking connector doesn't do UDMA, and it seems not MWDMA */
        static const struct ata_port_info info_palmax_secondary = {
                .sht = &cs5530_sht,
-               .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+               .flags = ATA_FLAG_SLAVE_POSS,
                .pio_mask = 0x1f,
                .port_ops = &cs5530_port_ops
        };