static struct ata_port_operations simple_port_ops = {
.inherits = &legacy_base_port_ops,
- .data_xfer = ata_data_xfer_noirq,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
};
static struct ata_port_operations legacy_port_ops = {
.inherits = &legacy_base_port_ops,
- .data_xfer = ata_data_xfer_noirq,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
.set_mode = legacy_set_mode,
};
}
local_irq_restore(flags);
} else
- buflen = ata_data_xfer_noirq(dev, buf, buflen, rw);
+ buflen = ata_sff_data_xfer_noirq(dev, buf, buflen, rw);
return buflen;
}
static struct ata_port_operations pdc20230_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = pdc20230_set_piomode,
- .data_xfer = pdc_data_xfer_vlb,
+ .sff_data_xfer = pdc_data_xfer_vlb,
};
/*
/* Get the timing data in cycles. For now play safe at 50Mhz */
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
- active = FIT(t.active, 2, 15);
- recover = FIT(t.recover, 4, 15);
+ active = clamp_val(t.active, 2, 15);
+ recover = clamp_val(t.recover, 4, 15);
inb(0x3E6);
inb(0x3E6);
/* Get the timing data in cycles. For now play safe at 50Mhz */
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
- active = FIT(t.active, 2, 15);
- recover = FIT(t.recover, 2, 16);
+ active = clamp_val(t.active, 2, 15);
+ recover = clamp_val(t.recover, 2, 16);
recover &= 0x15;
inb(0x3E6);
ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
}
- active = FIT(t.active, 2, 17) - 2;
- recover = FIT(t.recover, 1, 16) - 1;
- setup = FIT(t.setup, 1, 4) - 1;
+ active = clamp_val(t.active, 2, 17) - 2;
+ recover = clamp_val(t.recover, 1, 16) - 1;
+ setup = clamp_val(t.setup, 1, 4) - 1;
/* Select the right timing bank for write timing */
rc = ioread8(ap->ioaddr.lbal_addr);
ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
}
- active = FIT(t.active, 2, 17) - 2;
- recover = FIT(t.recover, 1, 16) - 1;
- setup = FIT(t.setup, 1, 4) - 1;
+ active = clamp_val(t.active, 2, 17) - 2;
+ recover = clamp_val(t.recover, 1, 16) - 1;
+ setup = clamp_val(t.setup, 1, 4) - 1;
/* Select the right timing bank for write timing */
rc = ioread8(ap->ioaddr.lbal_addr);
}
/**
- * opt82c465mv_qc_issue_prot - command issue
+ * opt82c465mv_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
* FIXME: dual channel needs ->serialize support
*/
-static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int opti82c46x_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
&& ap->host->private_data != NULL)
opti82c46x_set_piomode(ap, adev);
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static struct ata_port_operations opti82c46x_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = opti82c46x_set_piomode,
- .qc_issue = opti82c46x_qc_issue_prot,
+ .qc_issue = opti82c46x_qc_issue,
};
static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (ld_qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
* @irq: interrupt line
*
* In dual channel mode the 6580 has one clock per channel and we have
- * to software clockswitch in qc_issue_prot.
+ * to software clockswitch in qc_issue.
*/
static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (ld_qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (ld_qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
ld_qdi->clock[adev->devno] = timing;
}
/**
- * qdi_qc_issue_prot - command issue
+ * qdi_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings.
*/
-static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
2 * ap->port_no);
}
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
}
return (buflen + 3) & ~3;
} else
- return ata_data_xfer(adev, buf, buflen, rw);
+ return ata_sff_data_xfer(adev, buf, buflen, rw);
}
static int qdi_port(struct platform_device *dev,
static struct ata_port_operations qdi6500_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = qdi6500_set_piomode,
- .qc_issue = qdi_qc_issue_prot,
- .data_xfer = vlb32_data_xfer,
+ .qc_issue = qdi_qc_issue,
+ .sff_data_xfer = vlb32_data_xfer,
};
static struct ata_port_operations qdi6580_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = qdi6580_set_piomode,
- .data_xfer = vlb32_data_xfer,
+ .sff_data_xfer = vlb32_data_xfer,
};
static struct ata_port_operations qdi6580dp_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = qdi6580dp_set_piomode,
- .data_xfer = vlb32_data_xfer,
+ .sff_data_xfer = vlb32_data_xfer,
};
static DEFINE_SPINLOCK(winbond_lock);
else
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
- active = (FIT(t.active, 3, 17) - 1) & 0x0F;
- recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
+ active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
+ recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
timing = (active << 4) | recovery;
winbond_writecfg(ld_winbond->timing, timing, reg);
reg |= 0x08; /* FIFO off */
if (!ata_pio_need_iordy(adev))
reg |= 0x02; /* IORDY off */
- reg |= (FIT(t.setup, 0, 3) << 6);
+ reg |= (clamp_val(t.setup, 0, 3) << 6);
winbond_writecfg(ld_winbond->timing, timing + 1, reg);
}
static struct ata_port_operations winbond_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = winbond_set_piomode,
- .data_xfer = vlb32_data_xfer,
+ .sff_data_xfer = vlb32_data_xfer,
};
static struct legacy_controller controllers[] = {
ap->ioaddr.cmd_addr = io_addr;
ap->ioaddr.altstatus_addr = ctrl_addr;
ap->ioaddr.ctl_addr = ctrl_addr;
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
ap->host->private_data = ld;
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206);
- ret = ata_host_activate(host, probe->irq, ata_interrupt, 0,
- &legacy_sht);
+ ret = ata_host_activate(host, probe->irq, ata_sff_interrupt, 0,
+ &legacy_sht);
if (ret)
goto fail;
ld->platform_dev = pdev;
projects / linux-2.6-omap-h63xx.git / blobdiff