5) Investigate problems with PCI Message Signalled Interrupts (MSI).
- 6) Add port multiplier support (intermediate)
+ 6) Cache frequently-accessed registers in mv_port_priv to reduce overhead.
7) Fix/reenable hot plug/unplug (should happen as a side-effect of (2) above).
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
+#include <linux/mbus.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
#define HAS_PCI(host) (!((host)->ports[0]->flags & MV_FLAG_SOC))
+#define WINDOW_CTRL(i) (0x20030 + ((i) << 4))
+#define WINDOW_BASE(i) (0x20034 + ((i) << 4))
+
enum {
/* DMA boundary 0xffff is required by the s/g splitting
* we need on /length/ in mv_fill-sg().
static int mv_stop_edma_engine(void __iomem *port_mmio);
static void mv_edma_cfg(struct ata_port *ap, int want_ncq);
+static void mv_pmp_select(struct ata_port *ap, int pmp);
+static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int mv_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+
/* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
* because we have to allow room for worst case splitting of
* PRDs for 64K boundaries in mv_fill_sg().
static struct ata_port_operations mv6_ops = {
.inherits = &mv5_ops,
- .qc_defer = ata_std_qc_defer,
+ .qc_defer = sata_pmp_qc_defer_cmd_switch,
.dev_config = mv6_dev_config,
.scr_read = mv_scr_read,
.scr_write = mv_scr_write,
+
+ .pmp_hardreset = mv_pmp_hardreset,
+ .pmp_softreset = mv_softreset,
+ .softreset = mv_softreset,
+ .error_handler = sata_pmp_error_handler,
};
static struct ata_port_operations mv_iie_ops = {
.inherits = &mv6_ops,
+ .qc_defer = ata_std_qc_defer, /* FIS-based switching */
.dev_config = ATA_OP_NULL,
.qc_prep = mv_qc_prep_iie,
};
},
{ /* chip_604x */
.flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
ATA_FLAG_NCQ,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
},
{ /* chip_608x */
.flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
ATA_FLAG_NCQ | MV_FLAG_DUAL_HC,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
},
{ /* chip_6042 */
.flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
ATA_FLAG_NCQ,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
},
{ /* chip_7042 */
.flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
ATA_FLAG_NCQ,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
},
{ /* chip_soc */
.flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
ATA_FLAG_NCQ | MV_FLAG_SOC,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
static void mv6_dev_config(struct ata_device *adev)
{
/*
+ * Deal with Gen-II ("mv6") hardware quirks/restrictions:
+ *
+ * Gen-II does not support NCQ over a port multiplier
+ * (no FIS-based switching).
+ *
* We don't have hob_nsect when doing NCQ commands on Gen-II.
* See mv_qc_prep() for more info.
*/
- if (adev->flags & ATA_DFLAG_NCQ)
- if (adev->max_sectors > ATA_MAX_SECTORS)
+ if (adev->flags & ATA_DFLAG_NCQ) {
+ if (sata_pmp_attached(adev->link->ap))
+ adev->flags &= ~ATA_DFLAG_NCQ;
+ else if (adev->max_sectors > ATA_MAX_SECTORS)
adev->max_sectors = ATA_MAX_SECTORS;
+ }
+}
+
+static void mv_config_fbs(void __iomem *port_mmio, int enable_fbs)
+{
+ u32 old_fcfg, new_fcfg, old_ltmode, new_ltmode;
+ /*
+ * Various bit settings required for operation
+ * in FIS-based switching (fbs) mode on GenIIe:
+ */
+ old_fcfg = readl(port_mmio + FIS_CFG_OFS);
+ old_ltmode = readl(port_mmio + LTMODE_OFS);
+ if (enable_fbs) {
+ new_fcfg = old_fcfg | FIS_CFG_SINGLE_SYNC;
+ new_ltmode = old_ltmode | LTMODE_BIT8;
+ } else { /* disable fbs */
+ new_fcfg = old_fcfg & ~FIS_CFG_SINGLE_SYNC;
+ new_ltmode = old_ltmode & ~LTMODE_BIT8;
+ }
+ if (new_fcfg != old_fcfg)
+ writelfl(new_fcfg, port_mmio + FIS_CFG_OFS);
+ if (new_ltmode != old_ltmode)
+ writelfl(new_ltmode, port_mmio + LTMODE_OFS);
}
static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
cfg |= (1 << 22); /* enab 4-entry host queue cache */
cfg |= (1 << 18); /* enab early completion */
cfg |= (1 << 17); /* enab cut-through (dis stor&forwrd) */
+
+ if (want_ncq && sata_pmp_attached(ap)) {
+ cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */
+ mv_config_fbs(port_mmio, 1);
+ } else {
+ mv_config_fbs(port_mmio, 0);
+ }
}
if (want_ncq) {
struct device *dev = ap->host->dev;
struct mv_host_priv *hpriv = ap->host->private_data;
struct mv_port_priv *pp;
- void __iomem *port_mmio = mv_ap_base(ap);
- unsigned long flags;
int tag;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0];
}
}
-
- spin_lock_irqsave(&ap->host->lock, flags);
-
- mv_edma_cfg(ap, 0);
- mv_set_edma_ptrs(port_mmio, hpriv, pp);
-
- spin_unlock_irqrestore(&ap->host->lock, flags);
-
- /* Don't turn on EDMA here...do it before DMA commands only. Else
- * we'll be unable to send non-data, PIO, etc due to restricted access
- * to shadow regs.
- */
return 0;
out_port_free_dma_mem:
flags |= CRQB_FLAG_READ;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
+ flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
/* get current queue index from software */
in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
flags |= qc->tag << CRQB_HOSTQ_SHIFT;
+ flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
/* get current queue index from software */
in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
* shadow block, etc registers.
*/
mv_stop_edma(ap);
+ mv_pmp_select(ap, qc->dev->link->pmp);
return ata_sff_qc_issue(qc);
}
printk(KERN_ERR DRV_NAME ": can't clear global reset\n");
rc = 1;
}
+ /*
+ * Temporary: wait 3 seconds before port-probing can happen,
+ * so that we don't miss finding sleepy SilXXXX port-multipliers.
+ * This can go away once hotplug is fully/correctly implemented.
+ */
+ if (rc == 0)
+ msleep(3000);
done:
return rc;
}
mdelay(1);
}
+static void mv_pmp_select(struct ata_port *ap, int pmp)
+{
+ if (sata_pmp_supported(ap)) {
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 reg = readl(port_mmio + SATA_IFCTL_OFS);
+ int old = reg & 0xf;
+
+ if (old != pmp) {
+ reg = (reg & ~0xf) | pmp;
+ writelfl(reg, port_mmio + SATA_IFCTL_OFS);
+ }
+ }
+}
+
+static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ mv_pmp_select(link->ap, sata_srst_pmp(link));
+ return sata_std_hardreset(link, class, deadline);
+}
+
+static int mv_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ mv_pmp_select(link->ap, sata_srst_pmp(link));
+ return ata_sff_softreset(link, class, deadline);
+}
+
static int mv_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
return 0;
}
+static void mv_conf_mbus_windows(struct mv_host_priv *hpriv,
+ struct mbus_dram_target_info *dram)
+{
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ writel(0, hpriv->base + WINDOW_CTRL(i));
+ writel(0, hpriv->base + WINDOW_BASE(i));
+ }
+
+ for (i = 0; i < dram->num_cs; i++) {
+ struct mbus_dram_window *cs = dram->cs + i;
+
+ writel(((cs->size - 1) & 0xffff0000) |
+ (cs->mbus_attr << 8) |
+ (dram->mbus_dram_target_id << 4) | 1,
+ hpriv->base + WINDOW_CTRL(i));
+ writel(cs->base, hpriv->base + WINDOW_BASE(i));
+ }
+}
+
/**
* mv_platform_probe - handle a positive probe of an soc Marvell
* host
res->end - res->start + 1);
hpriv->base -= MV_SATAHC0_REG_BASE;
+ /*
+ * (Re-)program MBUS remapping windows if we are asked to.
+ */
+ if (mv_platform_data->dram != NULL)
+ mv_conf_mbus_windows(hpriv, mv_platform_data->dram);
+
rc = mv_create_dma_pools(hpriv, &pdev->dev);
if (rc)
return rc;
projects / linux-2.6-omap-h63xx.git / blobdiff