SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO,
- SIL_DFL_LINK_FLAGS = ATA_LFLAG_HRST_TO_RESUME,
/*
* Controller IDs
SIL_QUIRK_UDMA5MAX = (1 << 1),
};
-static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
#ifdef CONFIG_PM
static int sil_pci_device_resume(struct pci_dev *pdev);
#endif
static void sil_dev_config(struct ata_device *dev);
-static int sil_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
-static int sil_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
+static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
+static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed);
static void sil_freeze(struct ata_port *ap);
static void sil_thaw(struct ata_port *ap);
/* TODO firmware versions should be added - eric */
static const struct sil_drivelist {
- const char * product;
+ const char *product;
unsigned int quirk;
} sil_blacklist [] = {
{ "ST320012AS", SIL_QUIRK_MOD15WRITE },
};
static struct scsi_host_template sil_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations sil_ops = {
+static struct ata_port_operations sil_ops = {
+ .inherits = &ata_bmdma_port_ops,
.dev_config = sil_dev_config,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
.set_mode = sil_set_mode,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
.freeze = sil_freeze,
.thaw = sil_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
.scr_read = sil_scr_read,
.scr_write = sil_scr_write,
- .port_start = ata_port_start,
};
static const struct ata_port_info sil_port_info[] = {
/* sil_3112 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
SIL_FLAG_NO_SATA_IRQ,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
/* sil_3512 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
/* sil_3114 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
MODULE_DEVICE_TABLE(pci, sil_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-static int slow_down = 0;
+static int slow_down;
module_param(slow_down, int, 0444);
MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)");
return 0;
}
-static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_reg)
+static inline void __iomem *sil_scr_addr(struct ata_port *ap,
+ unsigned int sc_reg)
{
void __iomem *offset = ap->ioaddr.scr_addr;
return NULL;
}
-static int sil_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
+static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
{
- void __iomem *mmio = sil_scr_addr(ap, sc_reg);
+ void __iomem *mmio = sil_scr_addr(link->ap, sc_reg);
if (mmio) {
*val = readl(mmio);
return -EINVAL;
}
-static int sil_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
+static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
{
- void __iomem *mmio = sil_scr_addr(ap, sc_reg);
+ void __iomem *mmio = sil_scr_addr(link->ap, sc_reg);
if (mmio) {
writel(val, mmio);
* controllers continue to assert IRQ as long as
* SError bits are pending. Clear SError immediately.
*/
- sil_scr_read(ap, SCR_ERROR, &serror);
- sil_scr_write(ap, SCR_ERROR, serror);
+ sil_scr_read(&ap->link, SCR_ERROR, &serror);
+ sil_scr_write(&ap->link, SCR_ERROR, serror);
- /* Trigger hotplug and accumulate SError only if the
- * port isn't already frozen. Otherwise, PHY events
- * during hardreset makes controllers with broken SIEN
- * repeat probing needlessly.
+ /* Sometimes spurious interrupts occur, double check
+ * it's PHYRDY CHG.
*/
- if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
- ata_ehi_hotplugged(&ap->link.eh_info);
+ if (serror & SERR_PHYRDY_CHG) {
ap->link.eh_info.serror |= serror;
+ goto freeze;
}
- goto freeze;
+ if (!(bmdma2 & SIL_DMA_COMPLETE))
+ return;
}
- if (unlikely(!qc))
- goto freeze;
-
- if (unlikely(qc->tf.flags & ATA_TFLAG_POLLING)) {
+ if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
/* this sometimes happens, just clear IRQ */
- ata_chk_status(ap);
+ ap->ops->sff_check_status(ap);
return;
}
*/
/* Check the ATA_DFLAG_CDB_INTR flag is enough here.
- * The flag was turned on only for atapi devices.
- * No need to check is_atapi_taskfile(&qc->tf) again.
+ * The flag was turned on only for atapi devices. No
+ * need to check ata_is_atapi(qc->tf.protocol) again.
*/
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
goto err_hsm;
break;
case HSM_ST_LAST:
- if (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
+ if (ata_is_dma(qc->tf.protocol)) {
/* clear DMA-Start bit */
ap->ops->bmdma_stop(qc);
}
/* check main status, clearing INTRQ */
- status = ata_chk_status(ap);
+ status = ap->ops->sff_check_status(ap);
if (unlikely(status & ATA_BUSY))
goto err_hsm;
/* ack bmdma irq events */
- ata_bmdma_irq_clear(ap);
+ ata_sff_irq_clear(ap);
/* kick HSM in the ass */
- ata_hsm_move(ap, qc, status, 0);
+ ata_sff_hsm_move(ap, qc, status, 0);
- if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATA_PROT_ATAPI_DMA))
+ if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol))
ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2);
return;
u32 tmp;
/* clear IRQ */
- ata_chk_status(ap);
- ata_bmdma_irq_clear(ap);
+ ap->ops->sff_check_status(ap);
+ ata_sff_irq_clear(ap);
/* turn on SATA IRQ if supported */
if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
}
}
-static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
int board_id = ent->driver_data;
ioaddr->ctl_addr = mmio_base + sil_port[i].ctl;
ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma;
ioaddr->scr_addr = mmio_base + sil_port[i].scr;
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio");
ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf");
projects / linux-2.6-omap-h63xx.git / blobdiff