#include "sata_promise.h"
#define DRV_NAME "sata_sx4"
-#define DRV_VERSION "0.9"
+#define DRV_VERSION "0.10"
enum {
WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP));
- VPRINTK("ata%u: ENTER\n", ap->id);
+ VPRINTK("ata%u: ENTER\n", ap->print_id);
/* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
unsigned int portno = ap->port_no;
unsigned int i;
- VPRINTK("ata%u: ENTER\n", ap->id);
+ VPRINTK("ata%u: ENTER\n", ap->print_id);
/* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
/* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
- VPRINTK("ata%u: ENTER\n", ap->id);
+ VPRINTK("ata%u: ENTER\n", ap->print_id);
wmb(); /* flush PRD, pkt writes */
/* step two - DMA from DIMM to host */
if (doing_hdma) {
- VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->id,
+ VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->print_id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* get drive status; clear intr; complete txn */
qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
/* step one - exec ATA command */
else {
u8 seq = (u8) (port_no + 1 + 4);
- VPRINTK("ata%u: read ata, 0x%x 0x%x\n", ap->id,
+ VPRINTK("ata%u: read ata, 0x%x 0x%x\n", ap->print_id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* submit hdma pkt */
/* step one - DMA from host to DIMM */
if (doing_hdma) {
u8 seq = (u8) (port_no + 1);
- VPRINTK("ata%u: write hdma, 0x%x 0x%x\n", ap->id,
+ VPRINTK("ata%u: write hdma, 0x%x 0x%x\n", ap->print_id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* submit ata pkt */
/* step two - execute ATA command */
else {
- VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->id,
+ VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->print_id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* get drive status; clear intr; complete txn */
qc->err_mask |= ac_err_mask(ata_wait_idle(ap));