libata-pmp-prep: implement ATA_LFLAG_NO_RETRY

[linux-2.6-omap-h63xx.git] / drivers / ata / sata_vsc.c

diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 24344d0d0575b10dc394ad501c22fd15f653e04e..0d9be168487326504ba799b38bab2091c1ed4ab2 100644 (file)
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -47,7 +47,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "sata_vsc"
-#define DRV_VERSION    "2.2"
+#define DRV_VERSION    "2.3"
 
 enum {
        VSC_MMIO_BAR                    = 0,
@@ -240,7 +240,7 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap)
                return;
        }
 
-       qc = ata_qc_from_tag(ap, ap->active_tag);
+       qc = ata_qc_from_tag(ap, ap->link.active_tag);
        if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
                handled = ata_host_intr(ap, qc);
 
@@ -317,7 +317,6 @@ static struct scsi_host_template vsc_sata_sht = {
 
 
 static const struct ata_port_operations vsc_sata_ops = {
-       .port_disable           = ata_port_disable,
        .tf_load                = vsc_sata_tf_load,
        .tf_read                = vsc_sata_tf_read,
        .exec_command           = ata_exec_command,
@@ -336,7 +335,6 @@ static const struct ata_port_operations vsc_sata_ops = {
        .post_internal_cmd      = ata_bmdma_post_internal_cmd,
        .irq_clear              = ata_bmdma_irq_clear,
        .irq_on                 = ata_irq_on,
-       .irq_ack                = ata_irq_ack,
        .scr_read               = vsc_sata_scr_read,
        .scr_write              = vsc_sata_scr_write,
        .port_start             = ata_port_start,
@@ -408,9 +406,15 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 
        mmio_base = host->iomap[VSC_MMIO_BAR];
 
-       for (i = 0; i < host->n_ports; i++)
-               vsc_sata_setup_port(&host->ports[i]->ioaddr,
-                                   mmio_base + (i + 1) * VSC_SATA_PORT_OFFSET);
+       for (i = 0; i < host->n_ports; i++) {
+               struct ata_port *ap = host->ports[i];
+               unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET;
+
+               vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset);
+
+               ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio");
+               ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port");
+       }
 
        /*
         * Use 32 bit DMA mask, because 64 bit address support is poor.