config VT
bool "Virtual terminal" if EMBEDDED
+ depends on !S390
select INPUT
default y if !VIOCONS
---help---
config SERIAL_NONSTANDARD
bool "Non-standard serial port support"
+ depends on HAS_IOMEM
---help---
Say Y here if you have any non-standard serial boards -- boards
which aren't supported using the standard "dumb" serial driver.
config COMPUTONE
tristate "Computone IntelliPort Plus serial support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
---help---
This driver supports the entire family of Intelliport II/Plus
controllers with the exception of the MicroChannel controllers and
config CYCLADES
tristate "Cyclades async mux support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (PCI || ISA)
---help---
This driver supports Cyclades Z and Y multiserial boards.
You would need something like this to connect more than two modems to
module will be called moxa.
config MOXA_SMARTIO
- tristate "Moxa SmartIO support"
+ tristate "Moxa SmartIO support (OBSOLETE)"
depends on SERIAL_NONSTANDARD
help
Say Y here if you have a Moxa SmartIO multiport serial card.
here.
config MOXA_SMARTIO_NEW
- tristate "Moxa SmartIO support v. 2.0 (EXPERIMENTAL)"
- depends on SERIAL_NONSTANDARD
+ tristate "Moxa SmartIO support v. 2.0"
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
help
Say Y here if you have a Moxa SmartIO multiport serial card and/or
want to help develop a new version of this driver.
config ISI
tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && PCI
select FW_LOADER
help
This is a driver for the Multi-Tech cards which provide several
config SX
tristate "Specialix SX (and SI) card support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
help
This is a driver for the SX and SI multiport serial cards.
Please read the file <file:Documentation/sx.txt> for details.
If you have an Alchemy AU1000 processor (MIPS based) and you want
to use a console on a serial port, say Y. Otherwise, say N.
+config SERIAL_DEC
+ bool "DECstation serial support"
+ depends on MACH_DECSTATION
+ default y
+ help
+ This selects whether you want to be asked about drivers for
+ DECstation serial ports.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about DECstation serial ports.
+
+config SERIAL_DEC_CONSOLE
+ bool "Support for console on a DECstation serial port"
+ depends on SERIAL_DEC
+ default y
+ help
+ If you say Y here, it will be possible to use a serial port as the
+ system console (the system console is the device which receives all
+ kernel messages and warnings and which allows logins in single user
+ mode). Note that the firmware uses ttyS0 as the serial console on
+ the Maxine and ttyS2 on the others.
+
+ If unsure, say Y.
+
+config ZS
+ bool "Z85C30 Serial Support"
+ depends on SERIAL_DEC
+ default y
+ help
+ Documentation on the Zilog 85C350 serial communications controller
+ is downloadable at <http://www.zilog.com/pdfs/serial/z85c30.pdf>
+
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
config HVC_ISERIES
bool "iSeries Hypervisor Virtual Console support"
- depends on PPC_ISERIES && !VIOCONS
+ depends on PPC_ISERIES
+ default y
select HVC_DRIVER
help
iSeries machines support a hypervisor virtual console.
help
IBM Console device driver which makes use of RTAS
+config HVC_BEAT
+ bool "Toshiba's Beat Hypervisor Console support"
+ depends on PPC_CELLEB
+ select HVC_DRIVER
+ help
+ Toshiba's Cell Reference Set Beat Console device driver
+
config HVCS
tristate "IBM Hypervisor Virtual Console Server support"
depends on PPC_PSERIES
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH
+ depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH && !S390
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV && !S390
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
config EFI_RTC
bool "EFI Real Time Clock Services"
depends on IA64
+config OMAP_RTC
+ bool "TI OMAP Real Time Clock"
+ depends on ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730
+ help
+ Support for TI OMAP RTC
config DS1302
tristate "DS1302 RTC support"
config DTLK
tristate "Double Talk PC internal speech card support"
+ depends on ISA
help
This driver is for the DoubleTalk PC, a speech synthesizer
manufactured by RC Systems (<http://www.rcsys.com/>). It is also
To compile this driver as a module, choose M here: the
module will be called sonypi.
-config TANBAC_TB0219
- tristate "TANBAC TB0219 base board support"
- depends TANBAC_TB022X
+config GPIO_TB0219
+ tristate "TANBAC TB0219 GPIO support"
+ depends on TANBAC_TB022X
select GPIO_VR41XX
source "drivers/char/agp/Kconfig"
config HANGCHECK_TIMER
tristate "Hangcheck timer"
- depends on X86 || IA64 || PPC64
+ depends on X86 || IA64 || PPC64 || S390
help
The hangcheck-timer module detects when the system has gone
out to lunch past a certain margin. It can reboot the system
source "drivers/char/tpm/Kconfig"
config TELCLOCK
- tristate "Telecom clock driver for MPBL0010 ATCA SBC"
+ tristate "Telecom clock driver for ATCA SBC"
depends on EXPERIMENTAL && X86
default n
help
- The telecom clock device is specific to the MPBL0010 ATCA computer and
- allows direct userspace access to the configuration of the telecom clock
- configuration settings. This device is used for hardware synchronization
- across the ATCA backplane fabric. Upon loading, the driver exports a
- sysfs directory, /sys/devices/platform/telco_clock, with a number of
- files for controlling the behavior of this hardware.
+ The telecom clock device is specific to the MPCBL0010 and MPCBL0050
+ ATCA computers and allows direct userspace access to the
+ configuration of the telecom clock configuration settings. This
+ device is used for hardware synchronization across the ATCA backplane
+ fabric. Upon loading, the driver exports a sysfs directory,
+ /sys/devices/platform/telco_clock, with a number of files for
+ controlling the behavior of this hardware.
+
+config DEVPORT
+ bool
+ depends on !M68K
+ depends on ISA || PCI
+ default y
+
+source "drivers/s390/char/Kconfig"
endmenu