#include "linux_compat.h"
#include "rio_linux.h"
-#include "typdef.h"
#include "pkt.h"
#include "daemon.h"
#include "rio.h"
#include "riospace.h"
-#include "top.h"
#include "cmdpkt.h"
#include "map.h"
-#include "riotypes.h"
#include "rup.h"
#include "port.h"
#include "riodrvr.h"
#include "unixrup.h"
#include "board.h"
#include "host.h"
-#include "error.h"
#include "phb.h"
#include "link.h"
#include "cmdblk.h"
#include "route.h"
-#include "control.h"
#include "cirrus.h"
#include "rioioctl.h"
struct rio_info *p;
struct tty_struct *tty;
int c;
- struct PKT *PacketP;
+ struct PKT __iomem *PacketP;
unsigned long flags;
PortP = (struct Port *) en;
if (c == 0)
break;
- rio_memcpy_toio(PortP->HostP->Caddr, (caddr_t) PacketP->data, PortP->gs.xmit_buf + PortP->gs.xmit_tail, c);
+ rio_memcpy_toio(PortP->HostP->Caddr, PacketP->data, PortP->gs.xmit_buf + PortP->gs.xmit_tail, c);
/* udelay (1); */
writeb(c, &(PacketP->len));
static int RxIntr;
static int TxIntr;
-void RIOServiceHost(struct rio_info *p, struct Host *HostP, int From)
+void RIOServiceHost(struct rio_info *p, struct Host *HostP)
{
rio_spin_lock(&HostP->HostLock);
if ((HostP->Flags & RUN_STATE) != RC_RUNNING) {
for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) {
struct Port *PortP = p->RIOPortp[port];
struct tty_struct *ttyP;
- struct PKT *PacketP;
+ struct PKT __iomem *PacketP;
/*
** not mapped in - most of the RIOPortp[] information
for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) {
struct Port *PortP = p->RIOPortp[port];
struct tty_struct *ttyP;
- struct PKT *PacketP;
+ struct PKT __iomem *PacketP;
/*
** not mapped in - most of the RIOPortp[] information
/* For now don't handle RTA reboots. -- REW.
Reenabled. Otherwise RTA reboots didn't work. Duh. -- REW */
if (PortP->MagicFlags) {
-#if 1
if (PortP->MagicFlags & MAGIC_REBOOT) {
/*
** well, the RTA has been rebooted, and there is room
PortP->InUse = NOT_INUSE;
rio_spin_unlock(&PortP->portSem);
- if (RIOParam(PortP, OPEN, ((PortP->Cor2Copy & (COR2_RTSFLOW | COR2_CTSFLOW)) == (COR2_RTSFLOW | COR2_CTSFLOW)) ? TRUE : FALSE, DONT_SLEEP) == RIO_FAIL) {
+ if (RIOParam(PortP, OPEN, ((PortP->Cor2Copy & (COR2_RTSFLOW | COR2_CTSFLOW)) == (COR2_RTSFLOW | COR2_CTSFLOW)) ? 1 : 0, DONT_SLEEP) == RIO_FAIL) {
continue; /* with next port */
}
rio_spin_lock(&PortP->portSem);
PortP->MagicFlags &= ~MAGIC_REBOOT;
}
-#endif
/*
** As mentioned above, this is a tacky hack to cope
while (PortP->WflushFlag && can_add_transmit(&PacketP, PortP) && (PortP->InUse == NOT_INUSE)) {
int p;
- struct PktCmd *PktCmdP;
+ struct PktCmd __iomem *PktCmdP;
rio_dprintk(RIO_DEBUG_INTR, "Add WFLUSH marker to data queue\n");
/*
** make it look just like a WFLUSH command
*/
- PktCmdP = (struct PktCmd *) &PacketP->data[0];
+ PktCmdP = (struct PktCmd __iomem *) &PacketP->data[0];
writeb(WFLUSH, &PktCmdP->Command);
{
struct tty_struct *TtyP;
unsigned short transCount;
- struct PKT *PacketP;
+ struct PKT __iomem *PacketP;
register unsigned int DataCnt;
- unsigned char *ptr;
+ unsigned char __iomem *ptr;
unsigned char *buf;
int copied = 0;
** run out of space it will be set to the offset of the
** next byte to copy from the packet data area. The packet
** length field is decremented by the number of bytes that
- ** we succesfully removed from the packet. When this reaches
+ ** we successfully removed from the packet. When this reaches
** zero, we reset the offset pointer to be zero, and free
** the packet from the front of the queue.
*/
/*
** check that it is not a command!
*/
- if (PacketP->len & PKT_CMD_BIT) {
+ if (readb(&PacketP->len) & PKT_CMD_BIT) {
rio_dprintk(RIO_DEBUG_INTR, "RIO: unexpected command packet received on PHB\n");
/* rio_dprint(RIO_DEBUG_INTR, (" sysport = %d\n", p->RIOPortp->PortNum)); */
- rio_dprintk(RIO_DEBUG_INTR, " dest_unit = %d\n", PacketP->dest_unit);
- rio_dprintk(RIO_DEBUG_INTR, " dest_port = %d\n", PacketP->dest_port);
- rio_dprintk(RIO_DEBUG_INTR, " src_unit = %d\n", PacketP->src_unit);
- rio_dprintk(RIO_DEBUG_INTR, " src_port = %d\n", PacketP->src_port);
- rio_dprintk(RIO_DEBUG_INTR, " len = %d\n", PacketP->len);
- rio_dprintk(RIO_DEBUG_INTR, " control = %d\n", PacketP->control);
- rio_dprintk(RIO_DEBUG_INTR, " csum = %d\n", PacketP->csum);
+ rio_dprintk(RIO_DEBUG_INTR, " dest_unit = %d\n", readb(&PacketP->dest_unit));
+ rio_dprintk(RIO_DEBUG_INTR, " dest_port = %d\n", readb(&PacketP->dest_port));
+ rio_dprintk(RIO_DEBUG_INTR, " src_unit = %d\n", readb(&PacketP->src_unit));
+ rio_dprintk(RIO_DEBUG_INTR, " src_port = %d\n", readb(&PacketP->src_port));
+ rio_dprintk(RIO_DEBUG_INTR, " len = %d\n", readb(&PacketP->len));
+ rio_dprintk(RIO_DEBUG_INTR, " control = %d\n", readb(&PacketP->control));
+ rio_dprintk(RIO_DEBUG_INTR, " csum = %d\n", readw(&PacketP->csum));
rio_dprintk(RIO_DEBUG_INTR, " data bytes: ");
for (DataCnt = 0; DataCnt < PKT_MAX_DATA_LEN; DataCnt++)
- rio_dprintk(RIO_DEBUG_INTR, "%d\n", PacketP->data[DataCnt]);
+ rio_dprintk(RIO_DEBUG_INTR, "%d\n", readb(&PacketP->data[DataCnt]));
remove_receive(PortP);
put_free_end(PortP->HostP, PacketP);
continue; /* with next packet */
** and available space.
*/
- transCount = tty_buffer_request_room(TtyP, PacketP->len & PKT_LEN_MASK);
+ transCount = tty_buffer_request_room(TtyP, readb(&PacketP->len) & PKT_LEN_MASK);
rio_dprintk(RIO_DEBUG_REC, "port %d: Copy %d bytes\n", PortP->PortNum, transCount);
/*
** To use the following 'kkprintfs' for debugging - change the '#undef'
** to '#define', (this is the only place ___DEBUG_IT___ occurs in the
** driver).
*/
- ptr = (unsigned char *) PacketP->data + PortP->RxDataStart;
+ ptr = (unsigned char __iomem *) PacketP->data + PortP->RxDataStart;
tty_prepare_flip_string(TtyP, &buf, transCount);
rio_memcpy_fromio(buf, ptr, transCount);
PortP->RxDataStart += transCount;
- PacketP->len -= transCount;
+ writeb(readb(&PacketP->len)-transCount, &PacketP->len);
copied += transCount;
- if (PacketP->len == 0) {
+ if (readb(&PacketP->len) == 0) {
/*
** If we have emptied the packet, then we can
** free it, and reset the start pointer for
projects / linux-2.6-omap-h63xx.git / blobdiff