#include <linux/init.h>
#include <linux/delay.h>
#include <linux/tty_flip.h>
+#include <linux/spinlock.h>
#include <asm/uaccess.h>
ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \
ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
-#define RS_EVENT_WRITE_WAKEUP 0
-
static struct tty_driver *riscom_driver;
+static DEFINE_SPINLOCK(riscom_lock);
+
static struct riscom_board rc_board[RC_NBOARD] = {
{
.base = RC_IOBASE1,
{
unsigned long flags;
- save_flags(flags); cli();
+ spin_lock_irqsave(&riscom_lock, flags);
+
rc_out(bp, RC_CTOUT, 0); /* Clear timeout */
rc_wait_CCR(bp); /* Wait for CCR ready */
rc_out(bp, CD180_CCR, CCR_HARDRESET); /* Reset CD180 chip */
- sti();
+ spin_unlock_irqrestore(&riscom_lock, flags);
msleep(50); /* Delay 0.05 sec */
- cli();
+ spin_lock_irqsave(&riscom_lock, flags);
rc_out(bp, CD180_GIVR, RC_ID); /* Set ID for this chip */
rc_out(bp, CD180_GICR, 0); /* Clear all bits */
rc_out(bp, CD180_PILR1, RC_ACK_MINT); /* Prio for modem intr */
rc_out(bp, CD180_PPRH, (RC_OSCFREQ/(1000000/RISCOM_TPS)) >> 8);
rc_out(bp, CD180_PPRL, (RC_OSCFREQ/(1000000/RISCOM_TPS)) & 0xff);
- restore_flags(flags);
+ spin_unlock_irqrestore(&riscom_lock, flags);
}
/* Main probing routine, also sets irq. */
*
*/
-static inline void rc_mark_event(struct riscom_port * port, int event)
-{
- set_bit(event, &port->event);
- schedule_work(&port->tqueue);
-}
-
static inline struct riscom_port * rc_get_port(struct riscom_board const * bp,
unsigned char const * what)
{
rc_out(bp, CD180_IER, port->IER);
}
if (port->xmit_cnt <= port->wakeup_chars)
- rc_mark_event(port, RS_EVENT_WRITE_WAKEUP);
+ tty_wakeup(tty);
}
static inline void rc_check_modem(struct riscom_board const * bp)
if (rc_in(bp, CD180_MSVR) & MSVR_CD)
wake_up_interruptible(&port->open_wait);
else
- schedule_work(&port->tqueue_hangup);
+ tty_hangup(tty);
}
#ifdef RISCOM_BRAIN_DAMAGED_CTS
tty->hw_stopped = 0;
port->IER |= IER_TXRDY;
if (port->xmit_cnt <= port->wakeup_chars)
- rc_mark_event(port, RS_EVENT_WRITE_WAKEUP);
+ tty_wakeup(tty);
} else {
tty->hw_stopped = 1;
port->IER &= ~IER_TXRDY;
tty->hw_stopped = 0;
port->IER |= IER_TXRDY;
if (port->xmit_cnt <= port->wakeup_chars)
- rc_mark_event(port, RS_EVENT_WRITE_WAKEUP);
+ tty_wakeup(tty);
} else {
tty->hw_stopped = 1;
port->IER &= ~IER_TXRDY;
}
port->xmit_buf = (unsigned char *) tmp;
}
-
- save_flags(flags); cli();
-
+
+ spin_lock_irqsave(&riscom_lock, flags);
+
if (port->tty)
clear_bit(TTY_IO_ERROR, &port->tty->flags);
rc_change_speed(bp, port);
port->flags |= ASYNC_INITIALIZED;
- restore_flags(flags);
+ spin_unlock_irqrestore(&riscom_lock, flags);
return 0;
}
int retval;
int do_clocal = 0;
int CD;
+ unsigned long flags;
/*
* If the device is in the middle of being closed, then block
*/
retval = 0;
add_wait_queue(&port->open_wait, &wait);
- cli();
+
+ spin_lock_irqsave(&riscom_lock, flags);
+
if (!tty_hung_up_p(filp))
port->count--;
- sti();
+
+ spin_unlock_irqrestore(&riscom_lock, flags);
+
port->blocked_open++;
while (1) {
- cli();
+ spin_lock_irqsave(&riscom_lock, flags);
+
rc_out(bp, CD180_CAR, port_No(port));
CD = rc_in(bp, CD180_MSVR) & MSVR_CD;
rc_out(bp, CD180_MSVR, MSVR_RTS);
bp->DTR &= ~(1u << port_No(port));
rc_out(bp, RC_DTR, bp->DTR);
- sti();
+
+ spin_unlock_irqrestore(&riscom_lock, flags);
+
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
!(port->flags & ASYNC_INITIALIZED)) {
if (!port || rc_paranoia_check(port, tty->name, "close"))
return;
-
- save_flags(flags); cli();
+
+ spin_lock_irqsave(&riscom_lock, flags);
+
if (tty_hung_up_p(filp))
goto out;
tty_ldisc_flush(tty);
tty->closing = 0;
- port->event = 0;
port->tty = NULL;
if (port->blocked_open) {
if (port->close_delay) {
}
port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
wake_up_interruptible(&port->close_wait);
-out: restore_flags(flags);
+
+out:
+ spin_unlock_irqrestore(&riscom_lock, flags);
}
static int rc_write(struct tty_struct * tty,
if (!tty || !port->xmit_buf)
return 0;
- save_flags(flags);
while (1) {
- cli();
+ spin_lock_irqsave(&riscom_lock, flags);
+
c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
SERIAL_XMIT_SIZE - port->xmit_head));
- if (c <= 0) {
- restore_flags(flags);
- break;
- }
+ if (c <= 0)
+ break; /* lock continues to be held */
memcpy(port->xmit_buf + port->xmit_head, buf, c);
port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
port->xmit_cnt += c;
- restore_flags(flags);
+
+ spin_unlock_irqrestore(&riscom_lock, flags);
buf += c;
count -= c;
total += c;
}
- cli();
if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped &&
!(port->IER & IER_TXRDY)) {
port->IER |= IER_TXRDY;
rc_out(bp, CD180_CAR, port_No(port));
rc_out(bp, CD180_IER, port->IER);
}
- restore_flags(flags);
+
+ spin_unlock_irqrestore(&riscom_lock, flags);
return total;
}
if (!tty || !port->xmit_buf)
return;
- save_flags(flags); cli();
+ spin_lock_irqsave(&riscom_lock, flags);
if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
goto out;
port->xmit_buf[port->xmit_head++] = ch;
port->xmit_head &= SERIAL_XMIT_SIZE - 1;
port->xmit_cnt++;
-out: restore_flags(flags);
+
+out:
+ spin_unlock_irqrestore(&riscom_lock, flags);
}
static void rc_flush_chars(struct tty_struct * tty)
!port->xmit_buf)
return;
- save_flags(flags); cli();
+ spin_lock_irqsave(&riscom_lock, flags);
+
port->IER |= IER_TXRDY;
rc_out(port_Board(port), CD180_CAR, port_No(port));
rc_out(port_Board(port), CD180_IER, port->IER);
- restore_flags(flags);
+
+ spin_unlock_irqrestore(&riscom_lock, flags);
}
static int rc_write_room(struct tty_struct * tty)
if (rc_paranoia_check(port, tty->name, "rc_flush_buffer"))
return;
- save_flags(flags); cli();
+ spin_lock_irqsave(&riscom_lock, flags);
+
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
- restore_flags(flags);
+
+ spin_unlock_irqrestore(&riscom_lock, flags);
tty_wakeup(tty);
}
return -ENODEV;
bp = port_Board(port);
- save_flags(flags); cli();
+
+ spin_lock_irqsave(&riscom_lock, flags);
+
rc_out(bp, CD180_CAR, port_No(port));
status = rc_in(bp, CD180_MSVR);
result = rc_in(bp, RC_RI) & (1u << port_No(port)) ? 0 : TIOCM_RNG;
- restore_flags(flags);
+
+ spin_unlock_irqrestore(&riscom_lock, flags);
+
result |= ((status & MSVR_RTS) ? TIOCM_RTS : 0)
| ((status & MSVR_DTR) ? TIOCM_DTR : 0)
| ((status & MSVR_CD) ? TIOCM_CAR : 0)
bp = port_Board(port);
- save_flags(flags); cli();
+ spin_lock_irqsave(&riscom_lock, flags);
+
if (set & TIOCM_RTS)
port->MSVR |= MSVR_RTS;
if (set & TIOCM_DTR)
rc_out(bp, CD180_CAR, port_No(port));
rc_out(bp, CD180_MSVR, port->MSVR);
rc_out(bp, RC_DTR, bp->DTR);
- restore_flags(flags);
+
+ spin_unlock_irqrestore(&riscom_lock, flags);
+
return 0;
}
struct riscom_board *bp = port_Board(port);
unsigned long flags;
- save_flags(flags); cli();
+ spin_lock_irqsave(&riscom_lock, flags);
+
port->break_length = RISCOM_TPS / HZ * length;
port->COR2 |= COR2_ETC;
port->IER |= IER_TXRDY;
rc_wait_CCR(bp);
rc_out(bp, CD180_CCR, CCR_CORCHG2);
rc_wait_CCR(bp);
- restore_flags(flags);
+
+ spin_unlock_irqrestore(&riscom_lock, flags);
}
static inline int rc_set_serial_info(struct riscom_port * port,
struct serial_struct tmp;
struct riscom_board *bp = port_Board(port);
int change_speed;
- unsigned long flags;
if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
return -EFAULT;
port->closing_wait = tmp.closing_wait;
}
if (change_speed) {
- save_flags(flags); cli();
+ unsigned long flags;
+
+ spin_lock_irqsave(&riscom_lock, flags);
rc_change_speed(bp, port);
- restore_flags(flags);
+ spin_unlock_irqrestore(&riscom_lock, flags);
}
return 0;
}
return;
bp = port_Board(port);
-
- save_flags(flags); cli();
+
+ spin_lock_irqsave(&riscom_lock, flags);
+
port->MSVR &= ~MSVR_RTS;
rc_out(bp, CD180_CAR, port_No(port));
- if (I_IXOFF(tty)) {
+ if (I_IXOFF(tty)) {
rc_wait_CCR(bp);
rc_out(bp, CD180_CCR, CCR_SSCH2);
rc_wait_CCR(bp);
}
rc_out(bp, CD180_MSVR, port->MSVR);
- restore_flags(flags);
+
+ spin_unlock_irqrestore(&riscom_lock, flags);
}
static void rc_unthrottle(struct tty_struct * tty)
bp = port_Board(port);
- save_flags(flags); cli();
+ spin_lock_irqsave(&riscom_lock, flags);
+
port->MSVR |= MSVR_RTS;
rc_out(bp, CD180_CAR, port_No(port));
if (I_IXOFF(tty)) {
rc_wait_CCR(bp);
}
rc_out(bp, CD180_MSVR, port->MSVR);
- restore_flags(flags);
+
+ spin_unlock_irqrestore(&riscom_lock, flags);
}
static void rc_stop(struct tty_struct * tty)
bp = port_Board(port);
- save_flags(flags); cli();
+ spin_lock_irqsave(&riscom_lock, flags);
+
port->IER &= ~IER_TXRDY;
rc_out(bp, CD180_CAR, port_No(port));
rc_out(bp, CD180_IER, port->IER);
- restore_flags(flags);
+
+ spin_unlock_irqrestore(&riscom_lock, flags);
}
static void rc_start(struct tty_struct * tty)
bp = port_Board(port);
- save_flags(flags); cli();
+ spin_lock_irqsave(&riscom_lock, flags);
+
if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
port->IER |= IER_TXRDY;
rc_out(bp, CD180_CAR, port_No(port));
rc_out(bp, CD180_IER, port->IER);
}
- restore_flags(flags);
-}
-/*
- * This routine is called from the work queue when the interrupt
- * routine has signalled that a hangup has occurred. The path of
- * hangup processing is:
- *
- * serial interrupt routine -> (workqueue) ->
- * do_rc_hangup() -> tty->hangup() -> rc_hangup()
- *
- */
-static void do_rc_hangup(struct work_struct *ugly_api)
-{
- struct riscom_port *port = container_of(ugly_api, struct riscom_port, tqueue_hangup);
- struct tty_struct *tty;
-
- tty = port->tty;
- if (tty)
- tty_hangup(tty); /* FIXME: module removal race still here */
+ spin_unlock_irqrestore(&riscom_lock, flags);
}
static void rc_hangup(struct tty_struct * tty)
bp = port_Board(port);
rc_shutdown_port(bp, port);
- port->event = 0;
port->count = 0;
port->flags &= ~ASYNC_NORMAL_ACTIVE;
port->tty = NULL;
tty->termios->c_iflag == old_termios->c_iflag)
return;
- save_flags(flags); cli();
+ spin_lock_irqsave(&riscom_lock, flags);
rc_change_speed(port_Board(port), port);
- restore_flags(flags);
+ spin_unlock_irqrestore(&riscom_lock, flags);
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
}
}
-static void do_softint(struct work_struct *ugly_api)
-{
- struct riscom_port *port = container_of(ugly_api, struct riscom_port, tqueue);
- struct tty_struct *tty;
-
- if(!(tty = port->tty))
- return;
-
- if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &port->event))
- tty_wakeup(tty);
-}
-
static const struct tty_operations riscom_ops = {
.open = rc_open,
.close = rc_close,
.tiocmset = rc_tiocmset,
};
-static inline int rc_init_drivers(void)
+static int __init rc_init_drivers(void)
{
int error;
int i;
memset(rc_port, 0, sizeof(rc_port));
for (i = 0; i < RC_NPORT * RC_NBOARD; i++) {
rc_port[i].magic = RISCOM8_MAGIC;
- INIT_WORK(&rc_port[i].tqueue, do_softint);
- INIT_WORK(&rc_port[i].tqueue_hangup, do_rc_hangup);
rc_port[i].close_delay = 50 * HZ/100;
rc_port[i].closing_wait = 3000 * HZ/100;
init_waitqueue_head(&rc_port[i].open_wait);
static void rc_release_drivers(void)
{
- unsigned long flags;
-
- save_flags(flags);
- cli();
tty_unregister_driver(riscom_driver);
put_tty_driver(riscom_driver);
- restore_flags(flags);
}
#ifndef MODULE
if (iobase || iobase1 || iobase2 || iobase3) {
for(i = 0; i < RC_NBOARD; i++)
- rc_board[0].base = 0;
+ rc_board[i].base = 0;
}
if (iobase)
projects / linux-2.6-omap-h63xx.git / blobdiff