#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/timer.h>
#include <linux/miscdevice.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/clk.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/arch/map.h>
-#include <asm/hardware/clock.h>
#undef S3C24XX_VA_WATCHDOG
#define S3C24XX_VA_WATCHDOG (0)
#define CONFIG_S3C2410_WATCHDOG_ATBOOT (0)
#define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME (15)
-static int nowayout = WATCHDOG_NOWAYOUT;
+static int nowayout = WATCHDOG_NOWAYOUT;
static int tmr_margin = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME;
static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT;
static int soft_noboot = 0;
if(down_trylock(&open_lock))
return -EBUSY;
- if (nowayout) {
+ if (nowayout)
__module_get(THIS_MODULE);
- } else {
- allow_close = CLOSE_STATE_ALLOW;
- }
+
+ allow_close = CLOSE_STATE_NOT;
/* start the timer */
s3c2410wdt_start();
* Shut off the timer.
* Lock it in if it's a module and we set nowayout
*/
+
if (allow_close == CLOSE_STATE_ALLOW) {
s3c2410wdt_stop();
} else {
/* kernel interface */
-static struct file_operations s3c2410wdt_fops = {
+static const struct file_operations s3c2410wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = s3c2410wdt_write,
return -ENOENT;
}
- clk_use(wdt_clock);
clk_enable(wdt_clock);
/* see if we can actually set the requested timer margin, and if
if (tmr_atboot && started == 0) {
printk(KERN_INFO PFX "Starting Watchdog Timer\n");
s3c2410wdt_start();
+ } else if (!tmr_atboot) {
+ /* if we're not enabling the watchdog, then ensure it is
+ * disabled if it has been left running from the bootloader
+ * or other source */
+
+ s3c2410wdt_stop();
}
return 0;
if (wdt_clock != NULL) {
clk_disable(wdt_clock);
- clk_unuse(wdt_clock);
clk_put(wdt_clock);
wdt_clock = NULL;
}