-/*
- * MC kernel module
- * (C) 2003 Linux Networx (http://lnxi.com)
- * This file may be distributed under the terms of the
- * GNU General Public License.
- *
- * Written by Thayne Harbaugh
- * Based on work by Dan Hollis <goemon at anime dot net> and others.
- * http://www.anime.net/~goemon/linux-ecc/
- *
- * NMI handling support added by
- * Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>
- *
- * $Id: edac_mc.h,v 1.4.2.10 2005/10/05 00:43:44 dsp_llnl Exp $
- *
- */
-
-#ifndef _EDAC_MC_H_
-#define _EDAC_MC_H_
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/smp.h>
-#include <linux/pci.h>
-#include <linux/time.h>
-#include <linux/nmi.h>
-#include <linux/rcupdate.h>
-#include <linux/completion.h>
-#include <linux/kobject.h>
-#include <linux/platform_device.h>
-
-#define EDAC_MC_LABEL_LEN 31
-#define MC_PROC_NAME_MAX_LEN 7
-
-#if PAGE_SHIFT < 20
-#define PAGES_TO_MiB( pages ) ( ( pages ) >> ( 20 - PAGE_SHIFT ) )
-#else /* PAGE_SHIFT > 20 */
-#define PAGES_TO_MiB( pages ) ( ( pages ) << ( PAGE_SHIFT - 20 ) )
-#endif
-
-#define edac_printk(level, prefix, fmt, arg...) \
- printk(level "EDAC " prefix ": " fmt, ##arg)
-
-#define edac_mc_printk(mci, level, fmt, arg...) \
- printk(level "EDAC MC%d: " fmt, mci->mc_idx, ##arg)
-
-#define edac_mc_chipset_printk(mci, level, prefix, fmt, arg...) \
- printk(level "EDAC " prefix " MC%d: " fmt, mci->mc_idx, ##arg)
-
-/* prefixes for edac_printk() and edac_mc_printk() */
-#define EDAC_MC "MC"
-#define EDAC_PCI "PCI"
-#define EDAC_DEBUG "DEBUG"
-
-#ifdef CONFIG_EDAC_DEBUG
-extern int edac_debug_level;
-
-#define edac_debug_printk(level, fmt, arg...) \
- do { \
- if (level <= edac_debug_level) \
- edac_printk(KERN_DEBUG, EDAC_DEBUG, fmt, ##arg); \
- } while(0)
-
-#define debugf0( ... ) edac_debug_printk(0, __VA_ARGS__ )
-#define debugf1( ... ) edac_debug_printk(1, __VA_ARGS__ )
-#define debugf2( ... ) edac_debug_printk(2, __VA_ARGS__ )
-#define debugf3( ... ) edac_debug_printk(3, __VA_ARGS__ )
-#define debugf4( ... ) edac_debug_printk(4, __VA_ARGS__ )
-
-#else /* !CONFIG_EDAC_DEBUG */
-
-#define debugf0( ... )
-#define debugf1( ... )
-#define debugf2( ... )
-#define debugf3( ... )
-#define debugf4( ... )
-
-#endif /* !CONFIG_EDAC_DEBUG */
-
-#define BIT(x) (1 << (x))
-#define PCI_VEND_DEV(vend, dev) PCI_VENDOR_ID_ ## vend, \
- PCI_DEVICE_ID_ ## vend ## _ ## dev
-
-#if defined(CONFIG_X86) && defined(CONFIG_PCI)
-#define dev_name(dev) pci_name(to_pci_dev(dev))
-#else
-#define dev_name(dev) to_platform_device(dev)->name
-#endif
-
-/* memory devices */
-enum dev_type {
- DEV_UNKNOWN = 0,
- DEV_X1,
- DEV_X2,
- DEV_X4,
- DEV_X8,
- DEV_X16,
- DEV_X32, /* Do these parts exist? */
- DEV_X64 /* Do these parts exist? */
-};
-
-#define DEV_FLAG_UNKNOWN BIT(DEV_UNKNOWN)
-#define DEV_FLAG_X1 BIT(DEV_X1)
-#define DEV_FLAG_X2 BIT(DEV_X2)
-#define DEV_FLAG_X4 BIT(DEV_X4)
-#define DEV_FLAG_X8 BIT(DEV_X8)
-#define DEV_FLAG_X16 BIT(DEV_X16)
-#define DEV_FLAG_X32 BIT(DEV_X32)
-#define DEV_FLAG_X64 BIT(DEV_X64)
-
-/* memory types */
-enum mem_type {
- MEM_EMPTY = 0, /* Empty csrow */
- MEM_RESERVED, /* Reserved csrow type */
- MEM_UNKNOWN, /* Unknown csrow type */
- MEM_FPM, /* Fast page mode */
- MEM_EDO, /* Extended data out */
- MEM_BEDO, /* Burst Extended data out */
- MEM_SDR, /* Single data rate SDRAM */
- MEM_RDR, /* Registered single data rate SDRAM */
- MEM_DDR, /* Double data rate SDRAM */
- MEM_RDDR, /* Registered Double data rate SDRAM */
- MEM_RMBS, /* Rambus DRAM */
- MEM_DDR2, /* DDR2 RAM */
- MEM_FB_DDR2, /* fully buffered DDR2 */
-};
-
-#define MEM_FLAG_EMPTY BIT(MEM_EMPTY)
-#define MEM_FLAG_RESERVED BIT(MEM_RESERVED)
-#define MEM_FLAG_UNKNOWN BIT(MEM_UNKNOWN)
-#define MEM_FLAG_FPM BIT(MEM_FPM)
-#define MEM_FLAG_EDO BIT(MEM_EDO)
-#define MEM_FLAG_BEDO BIT(MEM_BEDO)
-#define MEM_FLAG_SDR BIT(MEM_SDR)
-#define MEM_FLAG_RDR BIT(MEM_RDR)
-#define MEM_FLAG_DDR BIT(MEM_DDR)
-#define MEM_FLAG_RDDR BIT(MEM_RDDR)
-#define MEM_FLAG_RMBS BIT(MEM_RMBS)
-#define MEM_FLAG_DDR2 BIT(MEM_DDR2)
-#define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2)
-
-/* chipset Error Detection and Correction capabilities and mode */
-enum edac_type {
- EDAC_UNKNOWN = 0, /* Unknown if ECC is available */
- EDAC_NONE, /* Doesnt support ECC */
- EDAC_RESERVED, /* Reserved ECC type */
- EDAC_PARITY, /* Detects parity errors */
- EDAC_EC, /* Error Checking - no correction */
- EDAC_SECDED, /* Single bit error correction, Double detection */
- EDAC_S2ECD2ED, /* Chipkill x2 devices - do these exist? */
- EDAC_S4ECD4ED, /* Chipkill x4 devices */
- EDAC_S8ECD8ED, /* Chipkill x8 devices */
- EDAC_S16ECD16ED, /* Chipkill x16 devices */
-};
-
-#define EDAC_FLAG_UNKNOWN BIT(EDAC_UNKNOWN)
-#define EDAC_FLAG_NONE BIT(EDAC_NONE)
-#define EDAC_FLAG_PARITY BIT(EDAC_PARITY)
-#define EDAC_FLAG_EC BIT(EDAC_EC)
-#define EDAC_FLAG_SECDED BIT(EDAC_SECDED)
-#define EDAC_FLAG_S2ECD2ED BIT(EDAC_S2ECD2ED)
-#define EDAC_FLAG_S4ECD4ED BIT(EDAC_S4ECD4ED)
-#define EDAC_FLAG_S8ECD8ED BIT(EDAC_S8ECD8ED)
-#define EDAC_FLAG_S16ECD16ED BIT(EDAC_S16ECD16ED)
-
-/* scrubbing capabilities */
-enum scrub_type {
- SCRUB_UNKNOWN = 0, /* Unknown if scrubber is available */
- SCRUB_NONE, /* No scrubber */
- SCRUB_SW_PROG, /* SW progressive (sequential) scrubbing */
- SCRUB_SW_SRC, /* Software scrub only errors */
- SCRUB_SW_PROG_SRC, /* Progressive software scrub from an error */
- SCRUB_SW_TUNABLE, /* Software scrub frequency is tunable */
- SCRUB_HW_PROG, /* HW progressive (sequential) scrubbing */
- SCRUB_HW_SRC, /* Hardware scrub only errors */
- SCRUB_HW_PROG_SRC, /* Progressive hardware scrub from an error */
- SCRUB_HW_TUNABLE /* Hardware scrub frequency is tunable */
-};
-
-#define SCRUB_FLAG_SW_PROG BIT(SCRUB_SW_PROG)
-#define SCRUB_FLAG_SW_SRC BIT(SCRUB_SW_SRC_CORR)
-#define SCRUB_FLAG_SW_PROG_SRC BIT(SCRUB_SW_PROG_SRC_CORR)
-#define SCRUB_FLAG_SW_TUN BIT(SCRUB_SW_SCRUB_TUNABLE)
-#define SCRUB_FLAG_HW_PROG BIT(SCRUB_HW_PROG)
-#define SCRUB_FLAG_HW_SRC BIT(SCRUB_HW_SRC_CORR)
-#define SCRUB_FLAG_HW_PROG_SRC BIT(SCRUB_HW_PROG_SRC_CORR)
-#define SCRUB_FLAG_HW_TUN BIT(SCRUB_HW_TUNABLE)
-
-/* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */
/*
- * There are several things to be aware of that aren't at all obvious:
- *
- *
- * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc..
- *
- * These are some of the many terms that are thrown about that don't always
- * mean what people think they mean (Inconceivable!). In the interest of
- * creating a common ground for discussion, terms and their definitions
- * will be established.
- *
- * Memory devices: The individual chip on a memory stick. These devices
- * commonly output 4 and 8 bits each. Grouping several
- * of these in parallel provides 64 bits which is common
- * for a memory stick.
- *
- * Memory Stick: A printed circuit board that agregates multiple
- * memory devices in parallel. This is the atomic
- * memory component that is purchaseable by Joe consumer
- * and loaded into a memory socket.
- *
- * Socket: A physical connector on the motherboard that accepts
- * a single memory stick.
- *
- * Channel: Set of memory devices on a memory stick that must be
- * grouped in parallel with one or more additional
- * channels from other memory sticks. This parallel
- * grouping of the output from multiple channels are
- * necessary for the smallest granularity of memory access.
- * Some memory controllers are capable of single channel -
- * which means that memory sticks can be loaded
- * individually. Other memory controllers are only
- * capable of dual channel - which means that memory
- * sticks must be loaded as pairs (see "socket set").
- *
- * Chip-select row: All of the memory devices that are selected together.
- * for a single, minimum grain of memory access.
- * This selects all of the parallel memory devices across
- * all of the parallel channels. Common chip-select rows
- * for single channel are 64 bits, for dual channel 128
- * bits.
- *
- * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memmory.
- * Motherboards commonly drive two chip-select pins to
- * a memory stick. A single-ranked stick, will occupy
- * only one of those rows. The other will be unused.
- *
- * Double-Ranked stick: A double-ranked stick has two chip-select rows which
- * access different sets of memory devices. The two
- * rows cannot be accessed concurrently.
+ * Older .h file for edac, until all drivers are modified
*
- * Double-sided stick: DEPRECATED TERM, see Double-Ranked stick.
- * A double-sided stick has two chip-select rows which
- * access different sets of memory devices. The two
- * rows cannot be accessed concurrently. "Double-sided"
- * is irrespective of the memory devices being mounted
- * on both sides of the memory stick.
- *
- * Socket set: All of the memory sticks that are required for for
- * a single memory access or all of the memory sticks
- * spanned by a chip-select row. A single socket set
- * has two chip-select rows and if double-sided sticks
- * are used these will occupy those chip-select rows.
- *
- * Bank: This term is avoided because it is unclear when
- * needing to distinguish between chip-select rows and
- * socket sets.
- *
- * Controller pages:
- *
- * Physical pages:
- *
- * Virtual pages:
- *
- *
- * STRUCTURE ORGANIZATION AND CHOICES
- *
- *
- *
- * PS - I enjoyed writing all that about as much as you enjoyed reading it.
- */
-
-struct channel_info {
- int chan_idx; /* channel index */
- u32 ce_count; /* Correctable Errors for this CHANNEL */
- char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */
- struct csrow_info *csrow; /* the parent */
-};
-
-struct csrow_info {
- unsigned long first_page; /* first page number in dimm */
- unsigned long last_page; /* last page number in dimm */
- unsigned long page_mask; /* used for interleaving -
- * 0UL for non intlv
- */
- u32 nr_pages; /* number of pages in csrow */
- u32 grain; /* granularity of reported error in bytes */
- int csrow_idx; /* the chip-select row */
- enum dev_type dtype; /* memory device type */
- u32 ue_count; /* Uncorrectable Errors for this csrow */
- u32 ce_count; /* Correctable Errors for this csrow */
- enum mem_type mtype; /* memory csrow type */
- enum edac_type edac_mode; /* EDAC mode for this csrow */
- struct mem_ctl_info *mci; /* the parent */
-
- struct kobject kobj; /* sysfs kobject for this csrow */
- struct completion kobj_complete;
-
- /* FIXME the number of CHANNELs might need to become dynamic */
- u32 nr_channels;
- struct channel_info *channels;
-};
-
-struct mem_ctl_info {
- struct list_head link; /* for global list of mem_ctl_info structs */
- unsigned long mtype_cap; /* memory types supported by mc */
- unsigned long edac_ctl_cap; /* Mem controller EDAC capabilities */
- unsigned long edac_cap; /* configuration capabilities - this is
- * closely related to edac_ctl_cap. The
- * difference is that the controller may be
- * capable of s4ecd4ed which would be listed
- * in edac_ctl_cap, but if channels aren't
- * capable of s4ecd4ed then the edac_cap would
- * not have that capability.
- */
- unsigned long scrub_cap; /* chipset scrub capabilities */
- enum scrub_type scrub_mode; /* current scrub mode */
-
- /* Translates sdram memory scrub rate given in bytes/sec to the
- internal representation and configures whatever else needs
- to be configured.
- */
- int (*set_sdram_scrub_rate) (struct mem_ctl_info *mci, u32 *bw);
-
- /* Get the current sdram memory scrub rate from the internal
- representation and converts it to the closest matching
- bandwith in bytes/sec.
- */
- int (*get_sdram_scrub_rate) (struct mem_ctl_info *mci, u32 *bw);
-
- /* pointer to edac checking routine */
- void (*edac_check) (struct mem_ctl_info * mci);
-
- /*
- * Remaps memory pages: controller pages to physical pages.
- * For most MC's, this will be NULL.
- */
- /* FIXME - why not send the phys page to begin with? */
- unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci,
- unsigned long page);
- int mc_idx;
- int nr_csrows;
- struct csrow_info *csrows;
- /*
- * FIXME - what about controllers on other busses? - IDs must be
- * unique. dev pointer should be sufficiently unique, but
- * BUS:SLOT.FUNC numbers may not be unique.
- */
- struct device *dev;
- const char *mod_name;
- const char *mod_ver;
- const char *ctl_name;
- char proc_name[MC_PROC_NAME_MAX_LEN + 1];
- void *pvt_info;
- u32 ue_noinfo_count; /* Uncorrectable Errors w/o info */
- u32 ce_noinfo_count; /* Correctable Errors w/o info */
- u32 ue_count; /* Total Uncorrectable Errors for this MC */
- u32 ce_count; /* Total Correctable Errors for this MC */
- unsigned long start_time; /* mci load start time (in jiffies) */
-
- /* this stuff is for safe removal of mc devices from global list while
- * NMI handlers may be traversing list
- */
- struct rcu_head rcu;
- struct completion complete;
-
- /* edac sysfs device control */
- struct kobject edac_mci_kobj;
- struct completion kobj_complete;
-};
-
-#ifdef CONFIG_PCI
-
-/* write all or some bits in a byte-register*/
-static inline void pci_write_bits8(struct pci_dev *pdev, int offset, u8 value,
- u8 mask)
-{
- if (mask != 0xff) {
- u8 buf;
-
- pci_read_config_byte(pdev, offset, &buf);
- value &= mask;
- buf &= ~mask;
- value |= buf;
- }
-
- pci_write_config_byte(pdev, offset, value);
-}
-
-/* write all or some bits in a word-register*/
-static inline void pci_write_bits16(struct pci_dev *pdev, int offset,
- u16 value, u16 mask)
-{
- if (mask != 0xffff) {
- u16 buf;
-
- pci_read_config_word(pdev, offset, &buf);
- value &= mask;
- buf &= ~mask;
- value |= buf;
- }
-
- pci_write_config_word(pdev, offset, value);
-}
-
-/* write all or some bits in a dword-register*/
-static inline void pci_write_bits32(struct pci_dev *pdev, int offset,
- u32 value, u32 mask)
-{
- if (mask != 0xffff) {
- u32 buf;
-
- pci_read_config_dword(pdev, offset, &buf);
- value &= mask;
- buf &= ~mask;
- value |= buf;
- }
-
- pci_write_config_dword(pdev, offset, value);
-}
-
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_EDAC_DEBUG
-void edac_mc_dump_channel(struct channel_info *chan);
-void edac_mc_dump_mci(struct mem_ctl_info *mci);
-void edac_mc_dump_csrow(struct csrow_info *csrow);
-#endif /* CONFIG_EDAC_DEBUG */
-
-extern int edac_mc_add_mc(struct mem_ctl_info *mci,int mc_idx);
-extern struct mem_ctl_info * edac_mc_del_mc(struct device *dev);
-extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci,
- unsigned long page);
-extern void edac_mc_scrub_block(unsigned long page, unsigned long offset,
- u32 size);
-
-/*
- * The no info errors are used when error overflows are reported.
- * There are a limited number of error logging registers that can
- * be exausted. When all registers are exhausted and an additional
- * error occurs then an error overflow register records that an
- * error occured and the type of error, but doesn't have any
- * further information. The ce/ue versions make for cleaner
- * reporting logic and function interface - reduces conditional
- * statement clutter and extra function arguments.
- */
-extern void edac_mc_handle_ce(struct mem_ctl_info *mci,
- unsigned long page_frame_number, unsigned long offset_in_page,
- unsigned long syndrome, int row, int channel,
- const char *msg);
-extern void edac_mc_handle_ce_no_info(struct mem_ctl_info *mci,
- const char *msg);
-extern void edac_mc_handle_ue(struct mem_ctl_info *mci,
- unsigned long page_frame_number, unsigned long offset_in_page,
- int row, const char *msg);
-extern void edac_mc_handle_ue_no_info(struct mem_ctl_info *mci,
- const char *msg);
-extern void edac_mc_handle_fbd_ue(struct mem_ctl_info *mci,
- unsigned int csrow,
- unsigned int channel0,
- unsigned int channel1,
- char *msg);
-extern void edac_mc_handle_fbd_ce(struct mem_ctl_info *mci,
- unsigned int csrow,
- unsigned int channel,
- char *msg);
-
-/*
- * This kmalloc's and initializes all the structures.
- * Can't be used if all structures don't have the same lifetime.
*/
-extern struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows,
- unsigned nr_chans);
-/* Free an mc previously allocated by edac_mc_alloc() */
-extern void edac_mc_free(struct mem_ctl_info *mci);
+#include "edac_core.h"
-#endif /* _EDAC_MC_H_ */
projects / linux-2.6-omap-h63xx.git / blobdiff