#define USB_DEVICE_ID_CYPRESS_MOUSE 0x0001
#define USB_DEVICE_ID_CYPRESS_HIDCOM 0x5500
#define USB_DEVICE_ID_CYPRESS_ULTRAMOUSE 0x7417
+#define USB_DEVICE_ID_CYPRESS_BARCODE_1 0xde61
+#define USB_DEVICE_ID_CYPRESS_BARCODE_2 0xde64
#define USB_VENDOR_ID_DELL 0x413c
#define USB_DEVICE_ID_DELL_W7658 0x2005
#define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f
#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
+#define USB_VENDOR_ID_GAMERON 0x0810
+#define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR 0x0001
+
#define USB_VENDOR_ID_GLAB 0x06c2
#define USB_DEVICE_ID_4_PHIDGETSERVO_30 0x0038
#define USB_DEVICE_ID_1_PHIDGETSERVO_30 0x0039
#define USB_VENDOR_ID_LOGITECH 0x046d
#define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101
+#define USB_DEVICE_ID_LOGITECH_WHEEL 0xc294
+#define USB_DEVICE_ID_LOGITECH_KBD 0xc311
#define USB_DEVICE_ID_S510_RECEIVER 0xc50c
#define USB_DEVICE_ID_S510_RECEIVER_2 0xc517
+#define USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500 0xc512
#define USB_DEVICE_ID_MX3000_RECEIVER 0xc513
#define USB_DEVICE_ID_DINOVO_EDGE 0xc714
#define USB_DEVICE_ID_MGE_UPS 0xffff
#define USB_DEVICE_ID_MGE_UPS1 0x0001
+#define USB_VENDOR_ID_MICROSOFT 0x045e
+#define USB_DEVICE_ID_SIDEWINDER_GV 0x003b
+
+#define USB_VENDOR_ID_NCR 0x0404
+#define USB_DEVICE_ID_NCR_FIRST 0x0300
+#define USB_DEVICE_ID_NCR_LAST 0x03ff
+
#define USB_VENDOR_ID_NEC 0x073e
#define USB_DEVICE_ID_NEC_USB_GAME_PAD 0x0301
#define USB_VENDOR_ID_PANTHERLORD 0x0810
#define USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK 0x0001
+#define USB_VENDOR_ID_PETALYNX 0x18b1
+#define USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE 0x0037
+
#define USB_VENDOR_ID_PLAYDOTCOM 0x0b43
#define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII 0x0003
{ USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_PREDATOR, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD },
+ { USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD },
- { USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_CYMOTION },
-
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_EDGE, HID_QUIRK_DUPLICATE_USAGES },
{ USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM, HID_QUIRK_HIDDEV },
+ { USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV, HID_QUIRK_HIDINPUT },
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_01, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_10, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER, HID_QUIRK_LOGITECH_DESCRIPTOR },
- { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER, HID_QUIRK_LOGITECH_DESCRIPTOR },
- { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2, HID_QUIRK_LOGITECH_DESCRIPTOR },
+ { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500, HID_QUIRK_LOGITECH_IGNORE_DOUBLED_WHEEL | HID_QUIRK_LOGITECH_EXPANDED_KEYMAP },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WHEEL, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
{ USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658, HID_QUIRK_RESET_LEDS },
+ { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_KBD, HID_QUIRK_RESET_LEDS },
{ 0, 0 }
};
+/* Quirks for devices which require report descriptor fixup go here */
+static const struct hid_rdesc_blacklist {
+ __u16 idVendor;
+ __u16 idProduct;
+ __u32 quirks;
+} hid_rdesc_blacklist[] = {
+
+ { USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_RDESC_CYMOTION },
+
+ { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER, HID_QUIRK_RDESC_LOGITECH },
+ { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER, HID_QUIRK_RDESC_LOGITECH },
+ { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2, HID_QUIRK_RDESC_LOGITECH },
+
+ { USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE, HID_QUIRK_RDESC_PETALYNX },
+
+ { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1, HID_QUIRK_RDESC_SWAPPED_MIN_MAX },
+ { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2, HID_QUIRK_RDESC_SWAPPED_MIN_MAX },
+
+ { 0, 0 }
+};
+
+/* Dynamic HID quirks list - specified at runtime */
+struct quirks_list_struct {
+ struct hid_blacklist hid_bl_item;
+ struct list_head node;
+};
+
+static LIST_HEAD(dquirks_list);
+static DECLARE_RWSEM(dquirks_rwsem);
+
+/* Runtime ("dynamic") quirks manipulation functions */
+
+/**
+ * usbhid_exists_dquirk: find any dynamic quirks for a USB HID device
+ * @idVendor: the 16-bit USB vendor ID, in native byteorder
+ * @idProduct: the 16-bit USB product ID, in native byteorder
+ *
+ * Description:
+ * Scans dquirks_list for a matching dynamic quirk and returns
+ * the pointer to the relevant struct hid_blacklist if found.
+ * Must be called with a read lock held on dquirks_rwsem.
+ *
+ * Returns: NULL if no quirk found, struct hid_blacklist * if found.
+ */
+static struct hid_blacklist *usbhid_exists_dquirk(const u16 idVendor,
+ const u16 idProduct)
+{
+ struct quirks_list_struct *q;
+ struct hid_blacklist *bl_entry = NULL;
+
+ list_for_each_entry(q, &dquirks_list, node) {
+ if (q->hid_bl_item.idVendor == idVendor &&
+ q->hid_bl_item.idProduct == idProduct) {
+ bl_entry = &q->hid_bl_item;
+ break;
+ }
+ }
+
+ if (bl_entry != NULL)
+ dbg_hid("Found dynamic quirk 0x%x for USB HID vendor 0x%hx prod 0x%hx\n",
+ bl_entry->quirks, bl_entry->idVendor,
+ bl_entry->idProduct);
+
+ return bl_entry;
+}
+
+
+/**
+ * usbhid_modify_dquirk: add/replace a HID quirk
+ * @idVendor: the 16-bit USB vendor ID, in native byteorder
+ * @idProduct: the 16-bit USB product ID, in native byteorder
+ * @quirks: the u32 quirks value to add/replace
+ *
+ * Description:
+ * If an dynamic quirk exists in memory for this (idVendor,
+ * idProduct) pair, replace its quirks value with what was
+ * provided. Otherwise, add the quirk to the dynamic quirks list.
+ *
+ * Returns: 0 OK, -error on failure.
+ */
+int usbhid_modify_dquirk(const u16 idVendor, const u16 idProduct,
+ const u32 quirks)
+{
+ struct quirks_list_struct *q_new, *q;
+ int list_edited = 0;
+
+ if (!idVendor) {
+ dbg_hid("Cannot add a quirk with idVendor = 0\n");
+ return -EINVAL;
+ }
+
+ q_new = kmalloc(sizeof(struct quirks_list_struct), GFP_KERNEL);
+ if (!q_new) {
+ dbg_hid("Could not allocate quirks_list_struct\n");
+ return -ENOMEM;
+ }
+
+ q_new->hid_bl_item.idVendor = idVendor;
+ q_new->hid_bl_item.idProduct = idProduct;
+ q_new->hid_bl_item.quirks = quirks;
+
+ down_write(&dquirks_rwsem);
+
+ list_for_each_entry(q, &dquirks_list, node) {
+
+ if (q->hid_bl_item.idVendor == idVendor &&
+ q->hid_bl_item.idProduct == idProduct) {
+
+ list_replace(&q->node, &q_new->node);
+ kfree(q);
+ list_edited = 1;
+ break;
+
+ }
+
+ }
+
+ if (!list_edited)
+ list_add_tail(&q_new->node, &dquirks_list);
+
+ up_write(&dquirks_rwsem);
+
+ return 0;
+}
+
+/**
+ * usbhid_remove_all_dquirks: remove all runtime HID quirks from memory
+ *
+ * Description:
+ * Free all memory associated with dynamic quirks - called before
+ * module unload.
+ *
+ */
+static void usbhid_remove_all_dquirks(void)
+{
+ struct quirks_list_struct *q, *temp;
+
+ down_write(&dquirks_rwsem);
+ list_for_each_entry_safe(q, temp, &dquirks_list, node) {
+ list_del(&q->node);
+ kfree(q);
+ }
+ up_write(&dquirks_rwsem);
+
+}
+
+/**
+ * usbhid_quirks_init: apply USB HID quirks specified at module load time
+ */
+int usbhid_quirks_init(char **quirks_param)
+{
+ u16 idVendor, idProduct;
+ u32 quirks;
+ int n = 0, m;
+
+ for (; quirks_param[n] && n < MAX_USBHID_BOOT_QUIRKS; n++) {
+
+ m = sscanf(quirks_param[n], "0x%hx:0x%hx:0x%x",
+ &idVendor, &idProduct, &quirks);
+
+ if (m != 3 ||
+ usbhid_modify_dquirk(idVendor, idProduct, quirks) != 0) {
+ printk(KERN_WARNING
+ "Could not parse HID quirk module param %s\n",
+ quirks_param[n]);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * usbhid_quirks_exit: release memory associated with dynamic_quirks
+ *
+ * Description:
+ * Release all memory associated with dynamic quirks. Called upon
+ * module unload.
+ *
+ * Returns: nothing
+ */
+void usbhid_quirks_exit(void)
+{
+ usbhid_remove_all_dquirks();
+}
+
+/**
+ * usbhid_exists_squirk: return any static quirks for a USB HID device
+ * @idVendor: the 16-bit USB vendor ID, in native byteorder
+ * @idProduct: the 16-bit USB product ID, in native byteorder
+ *
+ * Description:
+ * Given a USB vendor ID and product ID, return a pointer to
+ * the hid_blacklist entry associated with that device.
+ *
+ * Returns: pointer if quirk found, or NULL if no quirks found.
+ */
+static const struct hid_blacklist *usbhid_exists_squirk(const u16 idVendor,
+ const u16 idProduct)
+{
+ const struct hid_blacklist *bl_entry = NULL;
+ int n = 0;
+
+ for (; hid_blacklist[n].idVendor; n++)
+ if (hid_blacklist[n].idVendor == idVendor &&
+ hid_blacklist[n].idProduct == idProduct)
+ bl_entry = &hid_blacklist[n];
+
+ if (bl_entry != NULL)
+ dbg_hid("Found squirk 0x%x for USB HID vendor 0x%hx prod 0x%hx\n",
+ bl_entry->quirks, bl_entry->idVendor,
+ bl_entry->idProduct);
+ return bl_entry;
+}
+
/**
* usbhid_lookup_quirk: return any quirks associated with a USB HID device
* @idVendor: the 16-bit USB vendor ID, in native byteorder
u32 usbhid_lookup_quirk(const u16 idVendor, const u16 idProduct)
{
u32 quirks = 0;
- int n = 0;
+ const struct hid_blacklist *bl_entry = NULL;
/* Ignore all Wacom devices */
if (idVendor == USB_VENDOR_ID_WACOM)
idProduct <= USB_DEVICE_ID_CODEMERCS_IOW_LAST)
return HID_QUIRK_IGNORE;
- for (; hid_blacklist[n].idVendor; n++)
- if (hid_blacklist[n].idVendor == idVendor &&
- hid_blacklist[n].idProduct == idProduct)
- quirks = hid_blacklist[n].quirks;
+ /* NCR devices must not be queried for reports */
+ if (idVendor == USB_VENDOR_ID_NCR &&
+ idProduct >= USB_DEVICE_ID_NCR_FIRST &&
+ idProduct <= USB_DEVICE_ID_NCR_LAST)
+ return HID_QUIRK_NOGET;
+
+ down_read(&dquirks_rwsem);
+ bl_entry = usbhid_exists_dquirk(idVendor, idProduct);
+ if (!bl_entry)
+ bl_entry = usbhid_exists_squirk(idVendor, idProduct);
+ if (bl_entry)
+ quirks = bl_entry->quirks;
+ up_read(&dquirks_rwsem);
return quirks;
}
+
+/*
+ * Cherry Cymotion keyboard have an invalid HID report descriptor,
+ * that needs fixing before we can parse it.
+ */
+static void usbhid_fixup_cymotion_descriptor(char *rdesc, int rsize)
+{
+ if (rsize >= 17 && rdesc[11] == 0x3c && rdesc[12] == 0x02) {
+ printk(KERN_INFO "Fixing up Cherry Cymotion report descriptor\n");
+ rdesc[11] = rdesc[16] = 0xff;
+ rdesc[12] = rdesc[17] = 0x03;
+ }
+}
+
+
+/*
+ * Certain Logitech keyboards send in report #3 keys which are far
+ * above the logical maximum described in descriptor. This extends
+ * the original value of 0x28c of logical maximum to 0x104d
+ */
+static void usbhid_fixup_logitech_descriptor(unsigned char *rdesc, int rsize)
+{
+ if (rsize >= 90 && rdesc[83] == 0x26
+ && rdesc[84] == 0x8c
+ && rdesc[85] == 0x02) {
+ printk(KERN_INFO "Fixing up Logitech keyboard report descriptor\n");
+ rdesc[84] = rdesc[89] = 0x4d;
+ rdesc[85] = rdesc[90] = 0x10;
+ }
+}
+
+/* Petalynx Maxter Remote has maximum for consumer page set too low */
+static void usbhid_fixup_petalynx_descriptor(unsigned char *rdesc, int rsize)
+{
+ if (rsize >= 60 && rdesc[39] == 0x2a
+ && rdesc[40] == 0xf5
+ && rdesc[41] == 0x00
+ && rdesc[59] == 0x26
+ && rdesc[60] == 0xf9
+ && rdesc[61] == 0x00) {
+ printk(KERN_INFO "Fixing up Petalynx Maxter Remote report descriptor\n");
+ rdesc[60] = 0xfa;
+ rdesc[40] = 0xfa;
+ }
+}
+
+/*
+ * Some USB barcode readers from cypress have usage min and usage max in
+ * the wrong order
+ */
+static void usbhid_fixup_cypress_descriptor(unsigned char *rdesc, int rsize)
+{
+ short fixed = 0;
+ int i;
+
+ for (i = 0; i < rsize - 4; i++) {
+ if (rdesc[i] == 0x29 && rdesc [i+2] == 0x19) {
+ unsigned char tmp;
+
+ rdesc[i] = 0x19; rdesc[i+2] = 0x29;
+ tmp = rdesc[i+3];
+ rdesc[i+3] = rdesc[i+1];
+ rdesc[i+1] = tmp;
+ }
+ }
+
+ if (fixed)
+ printk(KERN_INFO "Fixing up Cypress report descriptor\n");
+}
+
+
+static void __usbhid_fixup_report_descriptor(__u32 quirks, char *rdesc, unsigned rsize)
+{
+ if ((quirks & HID_QUIRK_RDESC_CYMOTION))
+ usbhid_fixup_cymotion_descriptor(rdesc, rsize);
+
+ if (quirks & HID_QUIRK_RDESC_LOGITECH)
+ usbhid_fixup_logitech_descriptor(rdesc, rsize);
+
+ if (quirks & HID_QUIRK_RDESC_SWAPPED_MIN_MAX)
+ usbhid_fixup_cypress_descriptor(rdesc, rsize);
+
+ if (quirks & HID_QUIRK_RDESC_PETALYNX)
+ usbhid_fixup_petalynx_descriptor(rdesc, rsize);
+}
+
+/**
+ * usbhid_fixup_report_descriptor: check if report descriptor needs fixup
+ *
+ * Description:
+ * Walks the hid_rdesc_blacklist[] array and checks whether the device
+ * is known to have broken report descriptor that needs to be fixed up
+ * prior to entering the HID parser
+ *
+ * Returns: nothing
+ */
+void usbhid_fixup_report_descriptor(const u16 idVendor, const u16 idProduct,
+ char *rdesc, unsigned rsize, char **quirks_param)
+{
+ int n, m;
+ u16 paramVendor, paramProduct;
+ u32 quirks;
+
+ /* static rdesc quirk entries */
+ for (n = 0; hid_rdesc_blacklist[n].idVendor; n++)
+ if (hid_rdesc_blacklist[n].idVendor == idVendor &&
+ hid_rdesc_blacklist[n].idProduct == idProduct)
+ __usbhid_fixup_report_descriptor(hid_rdesc_blacklist[n].quirks,
+ rdesc, rsize);
+
+ /* runtime rdesc quirk entries handling */
+ for (n = 0; quirks_param[n] && n < MAX_USBHID_BOOT_QUIRKS; n++) {
+ m = sscanf(quirks_param[n], "0x%hx:0x%hx:0x%x",
+ ¶mVendor, ¶mProduct, &quirks);
+
+ if (m != 3)
+ printk(KERN_WARNING
+ "Could not parse HID quirk module param %s\n",
+ quirks_param[n]);
+ else if (paramVendor == idVendor && paramProduct == idProduct)
+ __usbhid_fixup_report_descriptor(quirks, rdesc, rsize);
+ }
+
+}