#include <linux/delay.h>
#include <linux/platform_device.h>
-#include <linux/input.h>
+#include <linux/input-polldev.h>
#include <linux/kernel.h>
+#include <linux/mutex.h>
#include <linux/module.h>
#include <linux/timer.h>
#include <linux/dmi.h>
#include <linux/jiffies.h>
+
#include <asm/io.h>
#define HDAPS_LOW_PORT 0x1600 /* first port used by hdaps */
#define INIT_TIMEOUT_MSECS 4000 /* wait up to 4s for device init ... */
#define INIT_WAIT_MSECS 200 /* ... in 200ms increments */
-#define HDAPS_POLL_PERIOD (HZ/20) /* poll for input every 1/20s */
+#define HDAPS_POLL_INTERVAL 50 /* poll for input every 1/20s (50 ms)*/
#define HDAPS_INPUT_FUZZ 4 /* input event threshold */
#define HDAPS_INPUT_FLAT 4
-static struct timer_list hdaps_timer;
static struct platform_device *pdev;
-static struct input_dev *hdaps_idev;
+static struct input_polled_dev *hdaps_idev;
static unsigned int hdaps_invert;
static u8 km_activity;
static int rest_x;
static int rest_y;
-static DECLARE_MUTEX(hdaps_sem);
+static DEFINE_MUTEX(hdaps_mtx);
/*
- * __get_latch - Get the value from a given port. Callers must hold hdaps_sem.
+ * __get_latch - Get the value from a given port. Callers must hold hdaps_mtx.
*/
static inline u8 __get_latch(u16 port)
{
/*
* __check_latch - Check a port latch for a given value. Returns zero if the
- * port contains the given value. Callers must hold hdaps_sem.
+ * port contains the given value. Callers must hold hdaps_mtx.
*/
static inline int __check_latch(u16 port, u8 val)
{
/*
* __wait_latch - Wait up to 100us for a port latch to get a certain value,
- * returning zero if the value is obtained. Callers must hold hdaps_sem.
+ * returning zero if the value is obtained. Callers must hold hdaps_mtx.
*/
static int __wait_latch(u16 port, u8 val)
{
/*
* __device_refresh - request a refresh from the accelerometer. Does not wait
- * for refresh to complete. Callers must hold hdaps_sem.
+ * for refresh to complete. Callers must hold hdaps_mtx.
*/
static void __device_refresh(void)
{
/*
* __device_refresh_sync - request a synchronous refresh from the
* accelerometer. We wait for the refresh to complete. Returns zero if
- * successful and nonzero on error. Callers must hold hdaps_sem.
+ * successful and nonzero on error. Callers must hold hdaps_mtx.
*/
static int __device_refresh_sync(void)
{
/*
* __device_complete - indicate to the accelerometer that we are done reading
- * data, and then initiate an async refresh. Callers must hold hdaps_sem.
+ * data, and then initiate an async refresh. Callers must hold hdaps_mtx.
*/
static inline void __device_complete(void)
{
{
int ret;
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mtx);
/* do a sync refresh -- we need to be sure that we read fresh data */
ret = __device_refresh_sync();
__device_complete();
out:
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mtx);
return ret;
}
{
int ret;
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mtx);
ret = __hdaps_read_pair(port1, port2, val1, val2);
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mtx);
return ret;
}
{
int total, ret = -ENXIO;
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mtx);
outb(0x13, 0x1610);
outb(0x01, 0x161f);
}
out:
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mtx);
return ret;
}
};
/*
- * hdaps_calibrate - Set our "resting" values. Callers must hold hdaps_sem.
+ * hdaps_calibrate - Set our "resting" values. Callers must hold hdaps_mtx.
*/
static void hdaps_calibrate(void)
{
__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &rest_x, &rest_y);
}
-static void hdaps_mousedev_poll(unsigned long unused)
+static void hdaps_mousedev_poll(struct input_polled_dev *dev)
{
+ struct input_dev *input_dev = dev->input;
int x, y;
- /* Cannot sleep. Try nonblockingly. If we fail, try again later. */
- if (down_trylock(&hdaps_sem)) {
- mod_timer(&hdaps_timer,jiffies + HDAPS_POLL_PERIOD);
- return;
- }
+ mutex_lock(&hdaps_mtx);
if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
goto out;
- input_report_abs(hdaps_idev, ABS_X, x - rest_x);
- input_report_abs(hdaps_idev, ABS_Y, y - rest_y);
- input_sync(hdaps_idev);
-
- mod_timer(&hdaps_timer, jiffies + HDAPS_POLL_PERIOD);
+ input_report_abs(input_dev, ABS_X, x - rest_x);
+ input_report_abs(input_dev, ABS_Y, y - rest_y);
+ input_sync(input_dev);
out:
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mtx);
}
struct device_attribute *attr,
const char *buf, size_t count)
{
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mtx);
hdaps_calibrate();
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mtx);
return count;
}
/* Module stuff */
/* hdaps_dmi_match - found a match. return one, short-circuiting the hunt. */
-static int __init hdaps_dmi_match(struct dmi_system_id *id)
+static int __init hdaps_dmi_match(const struct dmi_system_id *id)
{
printk(KERN_INFO "hdaps: %s detected.\n", id->ident);
return 1;
}
/* hdaps_dmi_match_invert - found an inverted match. */
-static int __init hdaps_dmi_match_invert(struct dmi_system_id *id)
+static int __init hdaps_dmi_match_invert(const struct dmi_system_id *id)
{
hdaps_invert = 1;
printk(KERN_INFO "hdaps: inverting axis readings.\n");
static int __init hdaps_init(void)
{
+ struct input_dev *idev;
int ret;
if (!dmi_check_system(hdaps_whitelist)) {
if (ret)
goto out_device;
- hdaps_idev = input_allocate_device();
+ hdaps_idev = input_allocate_polled_device();
if (!hdaps_idev) {
ret = -ENOMEM;
goto out_group;
}
+ hdaps_idev->poll = hdaps_mousedev_poll;
+ hdaps_idev->poll_interval = HDAPS_POLL_INTERVAL;
+
/* initial calibrate for the input device */
hdaps_calibrate();
/* initialize the input class */
- hdaps_idev->name = "hdaps";
- hdaps_idev->cdev.dev = &pdev->dev;
- hdaps_idev->evbit[0] = BIT(EV_ABS);
- input_set_abs_params(hdaps_idev, ABS_X,
+ idev = hdaps_idev->input;
+ idev->name = "hdaps";
+ idev->dev.parent = &pdev->dev;
+ idev->evbit[0] = BIT_MASK(EV_ABS);
+ input_set_abs_params(idev, ABS_X,
-256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT);
- input_set_abs_params(hdaps_idev, ABS_Y,
+ input_set_abs_params(idev, ABS_Y,
-256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT);
- ret = input_register_device(hdaps_idev);
+ ret = input_register_polled_device(hdaps_idev);
if (ret)
goto out_idev;
- /* start up our timer for the input device */
- init_timer(&hdaps_timer);
- hdaps_timer.function = hdaps_mousedev_poll;
- hdaps_timer.expires = jiffies + HDAPS_POLL_PERIOD;
- add_timer(&hdaps_timer);
-
printk(KERN_INFO "hdaps: driver successfully loaded.\n");
return 0;
out_idev:
- input_free_device(hdaps_idev);
+ input_free_polled_device(hdaps_idev);
out_group:
sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group);
out_device:
static void __exit hdaps_exit(void)
{
- del_timer_sync(&hdaps_timer);
- input_unregister_device(hdaps_idev);
+ input_unregister_polled_device(hdaps_idev);
+ input_free_polled_device(hdaps_idev);
sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group);
platform_device_unregister(pdev);
platform_driver_unregister(&hdaps_driver);
projects / linux-2.6-omap-h63xx.git / blobdiff