config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
- depends on BF534 || BF536 || BF537
+ depends on BLACKFIN
help
- This is the TWI I2C device driver for Blackfin 534/536/537/54x.
+ This is the TWI I2C device driver for Blackfin BF522, BF525,
+ BF527, BF534, BF536, BF537 and BF54x. For other Blackfin processors,
+ please don't use this driver.
+
This driver can also be built as a module. If so, the module
will be called i2c-bfin-twi.
This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
such an adapter.
- This support is also available as a module. If so, the module
+ This support is also available as a module. If so, the module
will be called i2c-elektor.
config I2C_GPIO
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the Intel
- 810/815 family of mainboard I2C interfaces. Specifically, the
+ 810/815 family of mainboard I2C interfaces. Specifically, the
following versions of the chipset are supported:
i810AA
i810AB
config I2C_IBM_IIC
tristate "IBM PPC 4xx on-chip I2C interface"
- depends on IBM_OCP
+ depends on 4xx
help
- Say Y here if you want to use IIC peripheral found on
- embedded IBM PPC 4xx based systems.
+ Say Y here if you want to use IIC peripheral found on
+ embedded IBM PPC 4xx based systems.
This driver can also be built as a module. If so, the module
will be called i2c-ibm_iic.
depends on ARCH_IXP2000
select I2C_ALGOBIT
help
- Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based
+ Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based
system and are using GPIO lines for an I2C bus.
This support is also available as a module. If so, the module
on the parport driver. This is meant for embedded systems. Don't say
Y here if you intend to say Y or M there.
- This support is also available as a module. If so, the module
+ This support is also available as a module. If so, the module
will be called i2c-parport.
config I2C_PARPORT_LIGHT
the clean but heavy parport handling is not an option. The
drawback is a reduced portability and the impossibility to
daisy-chain other parallel port devices.
-
+
Don't say Y here if you said Y or M to i2c-parport. Saying M to
both is possible but both modules should not be loaded at the same
time.
- This support is also available as a module. If so, the module
+ This support is also available as a module. If so, the module
will be called i2c-parport-light.
config I2C_PASEMI
This driver is deprecated in favor of the savagefb driver.
- This support is also available as a module. If so, the module
+ This support is also available as a module. If so, the module
will be called i2c-prosavage.
config I2C_S3C2410
depends on PCI
select I2C_ALGOBIT
help
- If you say yes to this option, support will be included for the
+ If you say yes to this option, support will be included for the
S3 Savage 4 I2C interface.
This driver is deprecated in favor of the savagefb driver.
If you don't know what to do here, say N.
- This support is also available as a module. If so, the module
+ This support is also available as a module. If so, the module
will be called scx200_i2c.
This driver is deprecated and will be dropped soon. Use i2c-gpio
If you don't know what to do here, say N.
- This support is also available as a module. If so, the module
+ This support is also available as a module. If so, the module
will be called scx200_acb.
config I2C_SIS5595
tristate "SiS 5595"
depends on PCI
help
- If you say yes to this option, support will be included for the
+ If you say yes to this option, support will be included for the
SiS5595 SMBus (a subset of I2C) interface.
This driver can also be built as a module. If so, the module
tristate "SiS 630/730"
depends on PCI
help
- If you say yes to this option, support will be included for the
+ If you say yes to this option, support will be included for the
SiS630 and SiS730 SMBus (a subset of I2C) interface.
This driver can also be built as a module. If so, the module
select I2C_ALGOPCA
default n
help
- This driver supports ISA boards using the Philips PCA 9564
- Parallel bus to I2C bus controller
-
+ This driver supports ISA boards using the Philips PCA9564
+ parallel bus to I2C bus controller.
+
This driver can also be built as a module. If so, the module
will be called i2c-pca-isa.
delays when I2C/SMBus chip drivers are loaded (e.g. at boot
time). If unsure, say N.
+config I2C_PCA_PLATFORM
+ tristate "PCA9564 as platform device"
+ select I2C_ALGOPCA
+ default n
+ help
+ This driver supports a memory mapped Philips PCA9564
+ parallel bus to I2C bus controller.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-pca-platform.
+
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
- depends on (MV64X60 || ARCH_ORION) && EXPERIMENTAL
+ depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Marvell 64xxx line of host bridges.
This driver can also be built as module. If so, the module
will be called i2c-pmcmsp.
+config I2C_SH7760
+ tristate "Renesas SH7760 I2C Controller"
+ depends on CPU_SUBTYPE_SH7760
+ help
+ This driver supports the 2 I2C interfaces on the Renesas SH7760.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-sh7760.
+
+config I2C_SH_MOBILE
+ tristate "SuperH Mobile I2C Controller"
+ depends on SUPERH
+ help
+ If you say yes to this option, support will be included for the
+ built-in I2C interface on the Renesas SH-Mobile processor.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-sh_mobile.
+
endmenu
projects / linux-2.6-omap-h63xx.git / blobdiff