#
menu "I2C Hardware Bus support"
- depends on I2C
config I2C_ALI1535
tristate "ALI 1535"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the SMB
Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB
config I2C_ALI1563
tristate "ALI 1563"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
If you say yes to this option, support will be included for the SMB
Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB
config I2C_ALI15X3
tristate "ALI 15x3"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the
Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
config I2C_AMD756
tristate "AMD 756/766/768/8111 and nVidia nForce"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the AMD
756/766/768 mainboard I2C interfaces. The driver also includes
config I2C_AMD8111
tristate "AMD 8111"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the
second (SMBus 2.0) AMD 8111 mainboard I2C interface.
config I2C_AT91
tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
- depends on I2C && ARCH_AT91 && EXPERIMENTAL
+ depends on ARCH_AT91 && EXPERIMENTAL
help
This supports the use of the I2C interface on Atmel AT91
processors.
config I2C_AU1550
tristate "Au1550/Au1200 SMBus interface"
- depends on I2C && (SOC_AU1550 || SOC_AU1200)
+ depends on SOC_AU1550 || SOC_AU1200
help
If you say yes to this option, support will be included for the
Au1550 and Au1200 SMBus interface.
This driver can also be built as a module. If so, the module
will be called i2c-au1550.
+config I2C_BLACKFIN_TWI
+ tristate "Blackfin TWI I2C support"
+ depends on BF534 || BF536 || BF537
+ help
+ This is the TWI I2C device driver for Blackfin 534/536/537.
+ This driver can also be built as a module. If so, the module
+ will be called i2c-bfin-twi.
+
+config I2C_BLACKFIN_TWI_CLK_KHZ
+ int "Blackfin TWI I2C clock (kHz)"
+ depends on I2C_BLACKFIN_TWI
+ range 10 400
+ default 50
+ help
+ The unit of the TWI clock is kHz.
+
config I2C_ELEKTOR
tristate "Elektor ISA card"
- depends on I2C && ISA && BROKEN_ON_SMP
+ depends on ISA && BROKEN_ON_SMP
select I2C_ALGOPCF
help
This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
This support is also available as a module. If so, the module
will be called i2c-elektor.
+config I2C_GPIO
+ tristate "GPIO-based bitbanging I2C"
+ depends on GENERIC_GPIO
+ select I2C_ALGOBIT
+ help
+ This is a very simple bitbanging I2C driver utilizing the
+ arch-neutral GPIO API to control the SCL and SDA lines.
+
config I2C_HYDRA
tristate "CHRP Apple Hydra Mac I/O I2C interface"
- depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL
+ depends on PCI && PPC_CHRP && EXPERIMENTAL
select I2C_ALGOBIT
help
This supports the use of the I2C interface in the Apple Hydra Mac
config I2C_I801
tristate "Intel 82801 (ICH)"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the Intel
801 family of mainboard I2C interfaces. Specifically, the following
config I2C_I810
tristate "Intel 810/815"
- depends on I2C && PCI
+ depends on PCI
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the Intel
config I2C_PXA
tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)"
- depends on I2C && EXPERIMENTAL && ARCH_PXA
+ depends on EXPERIMENTAL && ARCH_PXA
help
If you have devices in the PXA I2C bus, say yes to this option.
This driver can also be built as a module. If so, the module
config I2C_PIIX4
tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the Intel
PIIX4 family of mainboard I2C interfaces. Specifically, the following
ATI IXP300
ATI IXP400
ATI SB600
+ ATI SB700
Serverworks OSB4
Serverworks CSB5
Serverworks CSB6
config I2C_IBM_IIC
tristate "IBM PPC 4xx on-chip I2C interface"
- depends on IBM_OCP && I2C
+ depends on IBM_OCP
help
Say Y here if you want to use IIC peripheral found on
embedded IBM PPC 4xx based systems.
config I2C_IOP3XX
tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
- depends on (ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX) && I2C
+ depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX
help
Say Y here if you want to use the IIC bus controller on
the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.
config I2C_ISA
tristate
- depends on I2C
config I2C_IXP4XX
- tristate "IXP4xx GPIO-Based I2C Interface"
- depends on I2C && ARCH_IXP4XX
+ tristate "IXP4xx GPIO-Based I2C Interface (DEPRECATED)"
+ depends on ARCH_IXP4XX
select I2C_ALGOBIT
help
Say Y here if you have an Intel IXP4xx(420,421,422,425) based
This support is also available as a module. If so, the module
will be called i2c-ixp4xx.
+ This driver is deprecated and will be dropped soon. Use i2c-gpio
+ instead.
+
config I2C_IXP2000
- tristate "IXP2000 GPIO-Based I2C Interface"
- depends on I2C && ARCH_IXP2000
+ tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)"
+ depends on ARCH_IXP2000
select I2C_ALGOBIT
help
Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based
This support is also available as a module. If so, the module
will be called i2c-ixp2000.
+ This driver is deprecated and will be dropped soon. Use i2c-gpio
+ instead.
+
config I2C_POWERMAC
tristate "Powermac I2C interface"
- depends on I2C && PPC_PMAC
+ depends on PPC_PMAC
default y
help
This exposes the various PowerMac i2c interfaces to the linux i2c
config I2C_MPC
tristate "MPC107/824x/85xx/52xx/86xx"
- depends on I2C && PPC32
+ depends on PPC32
help
If you say yes to this option, support will be included for the
built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
config I2C_NFORCE2
tristate "Nvidia nForce2, nForce3 and nForce4"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the Nvidia
nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
config I2C_OCORES
tristate "OpenCores I2C Controller"
- depends on I2C && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
If you say yes to this option, support will be included for the
OpenCores I2C controller. For details see
config I2C_OMAP
tristate "OMAP I2C adapter"
- depends on I2C && ARCH_OMAP
+ depends on ARCH_OMAP
default y if MACH_OMAP_H3 || MACH_OMAP_OSK
help
If you say yes to this option, support will be included for the
config I2C_PARPORT
tristate "Parallel port adapter"
- depends on I2C && PARPORT
+ depends on PARPORT
select I2C_ALGOBIT
help
This supports parallel port I2C adapters such as the ones made by
config I2C_PARPORT_LIGHT
tristate "Parallel port adapter (light)"
- depends on I2C
select I2C_ALGOBIT
help
This supports parallel port I2C adapters such as the ones made by
config I2C_PASEMI
tristate "PA Semi SMBus interface"
-# depends on PPC_PASEMI && I2C && PCI
- depends on I2C && PCI
+ depends on PPC_PASEMI && PCI
help
Supports the PA Semi PWRficient on-chip SMBus interfaces.
config I2C_PROSAVAGE
tristate "S3/VIA (Pro)Savage"
- depends on I2C && PCI
+ depends on PCI
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the
config I2C_RPXLITE
tristate "Embedded Planet RPX Lite/Classic support"
- depends on (RPXLITE || RPXCLASSIC) && I2C
+ depends on RPXLITE || RPXCLASSIC
select I2C_ALGO8XX
config I2C_S3C2410
tristate "S3C2410 I2C Driver"
- depends on I2C && ARCH_S3C2410
+ depends on ARCH_S3C2410
help
Say Y here to include support for I2C controller in the
Samsung S3C2410 based System-on-Chip devices.
config I2C_SAVAGE4
tristate "S3 Savage 4"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the
config I2C_SIBYTE
tristate "SiByte SMBus interface"
- depends on SIBYTE_SB1xxx_SOC && I2C
+ depends on SIBYTE_SB1xxx_SOC
help
Supports the SiByte SOC on-chip I2C interfaces (2 channels).
+config I2C_SIMTEC
+ tristate "Simtec Generic I2C interface"
+ select I2C_ALGOBIT
+ help
+ If you say yes to this option, support will be inclyded for
+ the Simtec Generic I2C interface. This driver is for the
+ simple I2C bus used on newer Simtec products for general
+ I2C, such as DDC on the Simtec BBD2016A.
+
+ This driver can also be build as a module. If so, the module
+ will be called i2c-simtec.
+
config SCx200_I2C
- tristate "NatSemi SCx200 I2C using GPIO pins"
- depends on SCx200_GPIO && I2C
+ tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)"
+ depends on SCx200_GPIO
select I2C_ALGOBIT
help
Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
This support is also available as a module. If so, the module
will be called scx200_i2c.
+ This driver is deprecated and will be dropped soon. Use i2c-gpio
+ (or scx200_acb) instead.
+
config SCx200_I2C_SCL
int "GPIO pin used for SCL"
depends on SCx200_I2C
config SCx200_ACB
tristate "Geode ACCESS.bus support"
- depends on X86_32 && I2C && PCI
+ depends on X86_32 && PCI
help
Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
SC1100 processors and the CS5535 and CS5536 Geode companion devices.
config I2C_SIS5595
tristate "SiS 5595"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the
SiS5595 SMBus (a subset of I2C) interface.
config I2C_SIS630
tristate "SiS 630/730"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the
SiS630 and SiS730 SMBus (a subset of I2C) interface.
config I2C_SIS96X
tristate "SiS 96x"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the SiS
96x SMBus (a subset of I2C) interfaces. Specifically, the following
This driver can also be built as a module. If so, the module
will be called i2c-sis96x.
+config I2C_TAOS_EVM
+ tristate "TAOS evaluation module"
+ depends on EXPERIMENTAL
+ select SERIO
+ select SERIO_SERPORT
+ default n
+ help
+ This supports TAOS evaluation modules on serial port. In order to
+ use this driver, you will need the inputattach tool, which is part
+ of the input-utils package.
+
+ If unsure, say N.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-taos-evm.
+
config I2C_STUB
tristate "I2C/SMBus Test Stub"
- depends on I2C && EXPERIMENTAL && 'm'
+ depends on EXPERIMENTAL && m
default 'n'
help
This module may be useful to developers of SMBus client drivers,
If you don't know what to do here, definitely say N.
+config I2C_TINY_USB
+ tristate "I2C-Tiny-USB"
+ depends on USB
+ help
+ If you say yes to this option, support will be included for the
+ i2c-tiny-usb, a simple do-it-yourself USB to I2C interface. See
+ http://www.harbaum.org/till/i2c_tiny_usb for hardware details.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-tiny-usb.
+
config I2C_VERSATILE
tristate "ARM Versatile/Realview I2C bus support"
- depends on I2C && (ARCH_VERSATILE || ARCH_REALVIEW)
+ depends on ARCH_VERSATILE || ARCH_REALVIEW
select I2C_ALGOBIT
help
Say yes if you want to support the I2C serial bus on ARMs Versatile
This driver can also be built as a module. If so, the module
will be called i2c-versatile.
+config I2C_ACORN
+ bool "Acorn IOC/IOMD I2C bus support"
+ depends on ARCH_ACORN
+ default y
+ select I2C_ALGOBIT
+ help
+ Say yes if you want to support the I2C bus on Acorn platforms.
+
+ If you don't know, say Y.
+
config I2C_VIA
tristate "VIA 82C586B"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the VIA
config I2C_VIAPRO
tristate "VIA VT82C596/82C686/82xx and CX700"
- depends on I2C && PCI
+ depends on PCI
help
If you say yes to this option, support will be included for the VIA
VT82C596 and later SMBus interface. Specifically, the following
config I2C_VOODOO3
tristate "Voodoo 3"
- depends on I2C && PCI
+ depends on PCI
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the
config I2C_PCA_ISA
tristate "PCA9564 on an ISA bus"
- depends on I2C
+ depends on ISA
select I2C_ALGOPCA
default n
help
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
- depends on I2C && MV64X60 && EXPERIMENTAL
+ depends on MV64X60 && EXPERIMENTAL
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Marvell 64xxx line of host bridges.
config I2C_PNX
tristate "I2C bus support for Philips PNX targets"
- depends on ARCH_PNX4008 && I2C
+ depends on ARCH_PNX4008
help
This driver supports the Philips IP3204 I2C IP block master and/or
slave controller
This driver can also be built as a module. If so, the module
will be called i2c-pnx.
+config I2C_PMCMSP
+ tristate "PMC MSP I2C TWI Controller"
+ depends on PMC_MSP
+ help
+ This driver supports the PMC TWI controller on MSP devices.
+
+ This driver can also be built as module. If so, the module
+ will be called i2c-pmcmsp.
+
endmenu
projects / linux-2.6-omap-h63xx.git / blobdiff