pci_read_config_word(I801_dev, SMBBA, &i801_smba);
i801_smba &= 0xfff0;
if(i801_smba == 0) {
- dev_err(&dev->dev, "SMB base address uninitialized"
+ dev_err(&dev->dev, "SMB base address uninitialized "
"- upgrade BIOS or use force_addr=0xaddr\n");
return -ENODEV;
}
int result = 0;
int timeout = 0;
- dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x,"
+ dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
inb_p(SMBHSTDAT1));
/* Make sure the SMBus host is ready to start transmitting */
/* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev, "SMBus busy (%02x). Resetting... \n",
+ dev_dbg(&I801_dev->dev, "SMBus busy (%02x). Resetting...\n",
temp);
outb_p(temp, SMBHSTSTS);
if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
outb_p(inb(SMBHSTSTS), SMBHSTSTS);
if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev, "Failed reset at end of transaction"
+ dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
"(%02x)\n", temp);
}
dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
}
if (temp & errmask) {
dev_dbg(&I801_dev->dev, "SMBus busy (%02x). "
- "Resetting... \n", temp);
+ "Resetting...\n", temp);
outb_p(temp, SMBHSTSTS);
if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) {
dev_err(&I801_dev->dev,